• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Northern MN meet?

DSC_0076.jpg


and what i was chasing today down a road in the woods: the moose would run about 20-25 mph, then it would get wobbley and slow down. after a mile, it crashed through some trrees and brush and headed down to a lake.
DSC_0094.jpg


DSC_0103.jpg


and becasue i want her back :( taken a few days before
DSC_0008-1.jpg


edit: all these photos are completly unedited and not tweaked. maybe i'll get board and open up photoshop :D
 
umm, i forget the name. it is an old railroad bed just west/north of isabella off hwy 1. i ended up getting lost back on the roads, and almost running out of gas today! it was awesome. i finally came out in isabella. the onyl cars i sw out were ones for people back inthe boundy waters. there must be places to get in back where i was (like i said, i dont knwo where i eventually went to, but i took the rail road bed a long way back, and i didnt have my atlas in the ar lik eusual)

i figured i had the day off, and i'll be losing the suby at the end of the week, so if i wanted to drive that track, i better do it when i had the opportunity.
 
Nice work chasing down the moose, with your luck I'm surprised it didn't turn around and jump on the subie :laugh:

On a side note, I drove my car to work today. I used all the gears but it's still not adjusted right. I need to buy the little tool.
 
Redlineracer12 said:
Nice work chasing down the moose, with your luck I'm surprised it didn't turn around and jump on the subie :laugh:

On a side note, I drove my car to work today. I used all the gears but it's still not adjusted right. I need to buy the little tool.
Click to expand...

I drove my car to work today too....it is still slow.

Starter did go out on the Subie though. I have the motor off, but I can't figure out how to the wires off of it. Tried to look online but not finding much, and the local store that sells Haynes books didn't have the one I needed. DOH. Help?
 
Redlineracer12 said:
Does it just have a nut on the solenoid for the wires like our Contours do? Or does the harness clip on there some how?
Click to expand...

See, that is the part I can't see. The wires are physically connected to motor and not removable and then they lead up under the part it connects to...and i can't feel a nut or anything. Everything else on the car is easy to get to execpt this one thing. sigh.
 
That Fiero is soo pretty. I'm totally bummed I didn't get to see it. You guys will for sure have to come down here for something.. :)
 
You must log in or register to reply here.
Back
Top