tempted

[TRicker]

to do this:

http://www.shopatron.com/product/part_number=80006EFI-12/300.0.9410.9781.0.0.0

 

[Beans]

Buy 2

I wanna see what a 3L piston looks like coming out of an exhaust at SZ :laugh:

 

[TRicker]

it'll look like a 2.5L piston with bigger chunks. lol

i would do the smart thing and get a progressive controller.

 

[Redlineracer12]

i would do the smart thing and get a progressive controller.

Mmmm do eeeet...

I still toss the idea around once in a while.

 

[TRicker]

i still toss the idea of putting a ton of good bearings into this too:

the problem was, he used two bearings and a bunch of spacers, where i could press in about six of them bearings, to reduce the side load. but its a waste of time really, its lucky it made it into the box.

 

[yamaha racer 686]

i still toss the idea of putting a ton of good bearings into this too:

the problem was, he used two bearings and a bunch of spacers, where i could press in about six of them bearings, to reduce the side load. but its a waste of time really, its lucky it made it into the box.

ill take that box of scrap off your hands

 

[TRicker]

make an offer. keep in mind i do have 1600 bucks into this, even though its just a pile of aluminum now. so 50 bucks just won't cut it. lol