• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Powdercoating

B

Berkel

Hard-core CEG'er
Joined
Oct 8, 2005
Messages
2,121
Location
Toledo
Anyone know of any local shops or anything that can powdercoat wheels? :shrug:
 
exotic coatings. they are in romulus michigan. a little bit away from ohio but they are worth it. exoticcoatings.com
 
shavedsvt said:
exotic coatings. they are in romulus michigan. a little bit away from ohio but they are worth it. exoticcoatings.com
Click to expand...
Thanks. Awesome right by the detroit airport. Only about an hour away, I'm up in NWOH :cool:
 
Last edited:
yea i was at the wilson barn show in livonia and they had a booth there. i walked in it and i was impressed with what they had to show. im taking my 3.0L parts there before its all together.
 
I have a buddy who knows some people that run a powdercoating shop......
I just checked with him, the company only does large orders. They said they deal with a company out of Norwalk for individual orders called IPC.........

INDUSTRIAL POWDER COATINGS, INC.
204 Republic Street
Norwalk, OH 44857
(419) 660-2422
FAX (419) 660-6424
www.ipcoatings.com
Jack Nissen, Director of Sales
Plant Locations: Three plants at above location. Additional plants in Shelbyville, KY; Louisville, KY; Queretaro, Mexico; and St. Louis, MO.
Facilities: Most locations have multiple coating lines and processes with high volume, high throughput capabilities for stamped parts, fabricated metals, tubular products, hardware, wire goods, and heavy castings.
Substrates: Cold & hot rolled steel, hot dip & electrogalvanized steel, aluminum, magnesium, cast iron.
Pretreatment: Multiple-stage zinc and iron phosphates, dried-in-place conversion coatings, power washers, shot blasting, chrome and non-chrome sealers.
Coatings Application: Automatic and manual electrostatic and fluidized bed powder coating systems for epoxy, acrylic, hybrid, polyester, and nylon coatings. Environmentally controlled powder application room. Also e-coat, and zinc, nickel, and duplex nickel chrome platinum.
Curing System: Gas convection ovens.
Conveyor/Booth Capacity: Variable speed monorail conveyors, up to 200 lbs. Work size 3' W x 7' D x 12' L.
Blank Powder Coating Line: Clean, pretreat, powder coat, and cure blanked metal. Max. size 3' x 7'.
Quality Control: QS 9000 certified. Recipient of Ford Q-1 and Chrysler Pentastar awards. Complete testing capabilities, including phosphate coating weights, salt spray, humidity, cure, gravelometer, oil & water immersion, computerized color measurement, and electronic coating thickness gauges.


I tried the website, but it said page cannot be displayed.
 
shavedsvt said:
exotic coatings. they are in romulus michigan. a little bit away from ohio but they are worth it. exoticcoatings.com
Click to expand...

I don't know, i've seen some of the work they've done that wasn't going onto a display booth. It didn't look like they did any prep work or cleaning, it wasn't a very good job.

Mazza Auto does very good work, my friend had them do a set of wheels, they came out flawlessly. they know what they're doing for sure. http://www.mazzaautoparts.com/
 
The Five-Oh! said:
Mazza Auto does very good work, my friend had them do a set of wheels, they came out flawlessly. they know what they're doing for sure. http://www.mazzaautoparts.com/
Click to expand...
Too bad I didn't see this sooner. Just gave the okay to another guy to buy the axis's.

Rimpro wanted $180 to get rims looking flawless again.. $180 a RIM! And he said another $25-50 for each centercap since that isn't included. I told him he was crazy :laugh:
 
You must log in or register to reply here.
Back
Top