• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

P0351;455;174;300;303;

polackSVT

CEG'er
Joined
Mar 21, 2005
Messages
157
Location
Harrison Twp, MI
The car is falling apart...Scanner says that a problem lays in the primary or secondary electrical circuits for ignition coil "a". The rpms drop down and jump back up as I slow down to stop. It sometimes stalks , too.I have 132 k on it , never replaced the 02 sensors, could it be a bad ignition coil?
 
Change the ignition coil. That should get rid of P0351, P0300, P0301 and maybe P0174. In addition, change the Bank 1 and Bank 2 Upstream O2 sensors. Leave the downstream ones alone for now.

Worry about P0455 later.
 
all I have to say is holy shizzz. I hope the coil and o2s resolve your problems man
 
Bank 1 Upstream is the hardest to get to (close to Firewall). We have a how to in Duratec Maintenance -Read First.
http://www.contour.org/ceg-vb/showthread.php?t=41

Bank 2 Upstream is next to radiator. Stand in front of the car. It is to the left of the Bank 1 Precatalytic Converter (exhaust manifold). Remove the oil filter for more clearance.
 
Last edited:
Back
Top