svt2sho
CEG'er
my CEL comes on with code p0174 which meens running to lean in bank 2. anyone know what the problem is?
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CEL P0174 help!!!
- Thread starter svt2sho
- Start date
svt2sho
CEG'er
....
....
help...................
....
help...................
111R
Veteran CEG'er
bad post
Last edited:
A real time live data scan will help narrow it down but for now, some of the causes of P0174 are:
1) Air leaks after the MAF sensor or leaks in PCV system,
2) Exhaust leaks before or near O2 sensor of Bank 2.
3) Fuel injector issue
4) Ran/running out of fuel, fuel pump not supplying enough fuel
5) Leaking EGR gasket
6) Dirty MAF sensor
7) Engine oil dipstick not seated properly
1) Air leaks after the MAF sensor or leaks in PCV system,
2) Exhaust leaks before or near O2 sensor of Bank 2.
3) Fuel injector issue
4) Ran/running out of fuel, fuel pump not supplying enough fuel
5) Leaking EGR gasket
6) Dirty MAF sensor
7) Engine oil dipstick not seated properly
svt2sho
CEG'er
thanx this should help. as for the other guy saying bad post? u can go blow off at some fat girls....
A real time live data scan will help narrow it down but for now, some of the causes of P0174 are:
1) Air leaks after the MAF sensor or leaks in PCV system,
2) Exhaust leaks before or near O2 sensor of Bank 2.
3) Fuel injector issue
4) Ran/running out of fuel, fuel pump not supplying enough fuel
5) Leaking EGR gasket
6) Dirty MAF sensor
7) Engine oil dipstick not seated properly[/QUOTE]
A real time live data scan will help narrow it down but for now, some of the causes of P0174 are:
1) Air leaks after the MAF sensor or leaks in PCV system,
2) Exhaust leaks before or near O2 sensor of Bank 2.
3) Fuel injector issue
4) Ran/running out of fuel, fuel pump not supplying enough fuel
5) Leaking EGR gasket
6) Dirty MAF sensor
7) Engine oil dipstick not seated properly[/QUOTE]
Last edited:
111R
Veteran CEG'er
wow i was trying to help out, man. i figured i would wait for other people with more information then i could aquire. do you think the insult was really necessary? i joined this site to help out others not to be insulted for trying to help.
as for the other guy saying bad post? u can go blow off at some fat girls....
... as for the other guy saying bad post? u can go blow ....
....
Chill out svt2sho.
111R posted, then edited his post to read "bad post" (his post, not yours) as he figured his info was not accurate/correct.
svt2sho
CEG'er
...
...
ok i was totally misunderstood. i am sorry for insulting you. i thought you were saying my post was bad. sorry man
...
ok i was totally misunderstood. i am sorry for insulting you. i thought you were saying my post was bad. sorry man
Read this article. Replacing the intake manifold gaskets and cleaning the built up carbon/crud from the secondary buterflies helps. Your engine will run better too.
http://www.motor.com/MAGAZINE/Pdf/042003_09.pdf
http://www.motor.com/MAGAZINE/Pdf/042003_09.pdf