• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Fedex Delivers the Hotness

B

Bronco_WRX

Veteran CEG'er
Joined
Feb 11, 2002
Messages
519
Location
Livonia, Michigan, USA
Yesterday I get a little present to myself in the mail
100_1450.jpg


15 minutes and 33 staples later,
100_1451.jpg


I get into it only to find two more boxes,
100_1453.jpg


but this little fella helped me
100_1454.jpg


Onto the important pics:
100_1455.jpg


T-Bolts FTW
100_1460.jpg


And now for the hottest part:
100_1456.jpg


100_1463.jpg


And for a size comparison
100_1461.jpg
 
Last edited:
It will be going on this car
100_1469.jpg


I already have a Greddy FMIC kit on the car, but the original core got bent in an accident. The insurance company actually covered it, but they ordered the wrong size replacement (smaller) and didn't center it on the car, so I just decided to get a whole new kit. The kit is made by "Godspeed" (thanks Beans) and is basically a replica of the Greddy kit for about a third of the price with better fasteners. It will be going on when the front bumper comes off to repair the front lip.

And for good measure:
100_1467.jpg


Spice racks are so last year. It's all about the spice turntable.
 
Last edited:
you messed up, spicerack/turntable only works when it is subtily in the picture, putting it off to the side of the intercooler for comparison, or in with the box of intercooler piping would have made it a worthy spice rack photo, this is way to obvious.

otherwise, kick ass kit, what kind of gains do you expect from that?
 
AliasJerk said:
what kind of gains do you expect from that?
Click to expand...

Compared to the setup that's currently on it, I should see some small gains, but I doubt i'll get any bigger numbers than what the car originally put down. The car has been running slightly funny since this smaller core was put on, so hopefully this fixes it. I also wanted this kit for aesthetics because the size and placement have been bugging me.

Berkel said:
:cool: I loved your car when I saw it at last years EOSB
Click to expand...

Thanks! :)

I-Dom-In-VIII said:
Looks great man, Now get to work and get it on the car :cool: :laugh:
Click to expand...

I can't wait to put this on! It might be a little while before I can, though, because I have to coordinate things with my dad who will be repairing the fiberglass lip on the front bumper at the same time. We both have busy schedules and this is also my daily driver, so it's gonna be a tricky situation. I also need to order a flange for the bypass valve and get that welded on. I'll have pictures up as soon as it's all done, though!
 
Bronco_WRX said:
And for good measure:
100_1467.jpg


Spice racks are so last year. It's all about the spice turntable.
Click to expand...

Agreed, spice racks are dated...but you need to do the turntable mod. Don't worry, I rate this a level 2 on the mod scale and it can be done with just a flat head screwdriver. Benefits are twice the action and the ability to spin them in different directions. ;)

spice.JPG


If you need step by step instructions, I could probably place them on my FTP. :crazy:
 
FMIC's all around! mine gets here soon! 8)
 
Last edited:
You must log in or register to reply here.
Back
Top