Hi,
I've been tolerating my wiper motor for the last 2 years with problems, now I got these bad electric noise and bearing noise. Anyways, I decided it was time, I took out the cowl vent cover and I had a hard time taking out the motor from the linkage arm. I used this guide to help me:
http://www.autozone.com/repairguides...96b43f80cadd47
Ok, my question is:
When I get the new motor (6 pins), how will matchmark the linkage arm to the new motor?
I did have to move the position of the motor (with the switch on the steering wheel) to give me more place to work on.
I did mark the old motor but how will I align the new motor with the mark on the linkage arm ?
I will get a rebuilt motor, so I will have to return the old one.
Thanks,
I've been tolerating my wiper motor for the last 2 years with problems, now I got these bad electric noise and bearing noise. Anyways, I decided it was time, I took out the cowl vent cover and I had a hard time taking out the motor from the linkage arm. I used this guide to help me:
http://www.autozone.com/repairguides...96b43f80cadd47
Ok, my question is:
When I get the new motor (6 pins), how will matchmark the linkage arm to the new motor?
I did have to move the position of the motor (with the switch on the steering wheel) to give me more place to work on.
I did mark the old motor but how will I align the new motor with the mark on the linkage arm ?
I will get a rebuilt motor, so I will have to return the old one.
Thanks,