Contour Enthusiasts Group Archives Forums Branches South Central Saturday Septemebr 13, KC People Unite...........

Sounds good. Can we get an address now too??

psst, it was already posted

Originally posted by BlackSativa:

---

Fiorella's Jack Stack World Class
13418 Charlotte Street
Kansas City, MO 64146

---

psssstt......thanks

I can't believe it, a meet 15 blocks south of my house and I can't make it. I'm going to be out of town, but I wanted to show my car b/c it's for sale. I'm going to see if my roommate will run the car up there.

For those who don't know how to get to Jack Stack take 435 to Holmes and head South until you get 135th St, it's on the northeast corner of the intersection.

Would that be considered Martin City?

packing and waiting for our ride to the airport.
See you all tonight

Ok, so ya'll heard my car (Green '96, Zetec) about die as I pulled away tonight, and then not wanna give me any power. Now that ya'll have heard it, maybe I can give you the story and hopefully you can help me.

It threw a check engine light, had it pulled. Bank 1 too lean. I ran injector cleaner (two tanks) through it, as well as replaced the upstream O2 sensor. When I first start it up from cold, it runs like you guys heard. After it warms up some, it runs better, but still has absolutely no power. I physically cannot get it above 85 mph, EVER. At about 4k RPM it sounds like a rev limiter is kicking in, except rather than just dying briefly, it will drop back down to 1000RPM or so and stay there until I let off the throttle. Also, if I put it at WOT, it'll simply stall and die. Anybody have any ideas/suggestions?

Also, a few months ago I threw an EGR valve CEL, didn't have time to replace it right then, ran from Topeka to KC, and about half way there (Lawrence or so), the check engine light went out, and never had that particular problem since.

Thanks in advance-
-Jonathan

I wanna say it's a O2 sensor but you said you replaced it. As for the 4K drop to 1K that sounds like a govenor, but I didnt think it would be at 85 MPH. Do you have a OBDII scanner or are those 95's OBDI's?

It was nice meeting you by the way.

Sorry that I had to leave early, but we had a good time. I didn't get to meet everyone, my hands were full as you can tell. I hope that we could do it again soon.... PEACE.

i had to leave early as well, and i would like to appologize for that, but the baby sitter called and said she needed to leave so i had to go. it was awsome seeing the SVT's, that was the first time i had actually seen one up close. the only other time i had seen them was from a distance ceg and ebay. it was a cool experiance, hope to do it again soon. maybe ill be on time and be able to see the cars when there is still a little sun out.