Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: Aug 2001
Posts: 452
S
svttour Offline OP
Member
OP Offline
Member
S
Joined: Aug 2001
Posts: 452
I ran into a 12 second mustang running 42#injectors and a whole bunch of stuff to his car.. he told me that i shoudl run 30# injectors instead of 24#ers.. he said it would give a much bigger uotput and it would camcel out he FMU. Question: is this a good idea and wat kind of Fuel Management Unit is on our cars as of now?

Second question..: Should I remove my secondaries? My IMRC is shot to chit and im tired of them not opening up when i nee then the most. Shuld i get rid of them or buy a new IMRC. also.... what effect would the removed secondaries give to the 3L...


99 T-RED SVT
50,555 Miles and counting as off 7/12/2002
born jan 99
UR underdrive pulley
A Pillar Guages w/ AIR/FUEL VOLTS OIL PRESSURE "how to" members.aol.com/samplewon/apillarguageinstall.jpg
B&M short throw shifter
Eibach Springs
BAT Sturts
White Faced HVAC
2 ALPINE TYPE R 12" and ALPINE 1507 V12 AMP
Cup Holder Upgrade
PIAA super white Lows
Whelen 90watt 6 bulb strobe kit
Front end motor mounts

Mods waiting for install
3L(job has alrady begun, 3L totaly stripped.)
Quaife LSD
Apexi s-afc
Mirko splitter
Joined: Jun 2001
Posts: 3,419
P
Member
Offline
Member
P
Joined: Jun 2001
Posts: 3,419
30# is way more than you need. You want to use the smallest injectors that are sufficient for maximum fuel needs. The bigger you go, the more problems you are going to have trying to get them to work properly. If you have a set of injectors that meet your needs at maximum flow demand, putting a bigger set on will net you exactly 0 hp.


1998 Silver Frost SVT Contour born on...8/28/01[/i]
American Iron Shootout Radial Tire 2 Class Champion, Cecil County Dragway April 20, 2002
Joined: Aug 2001
Posts: 452
S
svttour Offline OP
Member
OP Offline
Member
S
Joined: Aug 2001
Posts: 452
ok i see what about my second question.


99 T-RED SVT
50,555 Miles and counting as off 7/12/2002
born jan 99
UR underdrive pulley
A Pillar Guages w/ AIR/FUEL VOLTS OIL PRESSURE "how to" members.aol.com/samplewon/apillarguageinstall.jpg
B&M short throw shifter
Eibach Springs
BAT Sturts
White Faced HVAC
2 ALPINE TYPE R 12" and ALPINE 1507 V12 AMP
Cup Holder Upgrade
PIAA super white Lows
Whelen 90watt 6 bulb strobe kit
Front end motor mounts

Mods waiting for install
3L(job has alrady begun, 3L totaly stripped.)
Quaife LSD
Apexi s-afc
Mirko splitter
Joined: Apr 2001
Posts: 724
S
Member
Offline
Member
S
Joined: Apr 2001
Posts: 724
who said bigger is better?! Oh must be those RWD muscles car maniacs..... :p


98 V6 Lots-o-mods SOLD
88 Daytona Shelby Z TII (The beast)
87 Daytona Shelby Z TII (Holy 20 psi of boost batman!)
Mods- 3" Downpipe, Hi-Flow cat, 3" mandrel bent exhaust with Dynomax Ultra flow. Manual boost controller, TurboXS blowoff, 5th injector, large canister wastegate, Nitrous Express go-fast-be-happy kit, ported exhaust manifold, ported intake manifold, upgraded motormounts, eibach springs, strut tower brace. Oh and 20 PSI to boot.. my oh my...
Joined: May 2000
Posts: 539
J
Member
Offline
Member
J
Joined: May 2000
Posts: 539
your more then likely gonna be running rich with the 24# injectors. i had to lean my car out one i went on the dyno and a wide band 02 to achieve a good 12.5:1 ratio which is ideal for max performance. Before u take the plunge i would say get the SAFC cause u will to tune those big injectors anyway.


jiako|98 svt silver|kkm true rev|18" Enkie RS5 wrapped w/falken GRB FK451 215/40|Mesh grill|
Sony headunit|Boston Acoutics (4)5X7|Memphis 1100 amp|(2) JL 12W3|KVR X drilled rotors|35% tint|2.25" True Duals w/ Magnaflows| kkm pedals|LSD|Fidnaza Flywheel|Centerforce Dual Friction Clutch|FMS wires|Konis/Eibach|ESP bushings and Mounts|75MM PRO FLOW|DMD|Aluminum shifter & E-brake handle|SAFC|HID's and a few more cc's 196.1 and 183.4
Joined: Aug 2001
Posts: 452
S
svttour Offline OP
Member
OP Offline
Member
S
Joined: Aug 2001
Posts: 452
check the sig under mods waiting to be installed Giacomo


99 T-RED SVT
50,555 Miles and counting as off 7/12/2002
born jan 99
UR underdrive pulley
A Pillar Guages w/ AIR/FUEL VOLTS OIL PRESSURE "how to" members.aol.com/samplewon/apillarguageinstall.jpg
B&M short throw shifter
Eibach Springs
BAT Sturts
White Faced HVAC
2 ALPINE TYPE R 12" and ALPINE 1507 V12 AMP
Cup Holder Upgrade
PIAA super white Lows
Whelen 90watt 6 bulb strobe kit
Front end motor mounts

Mods waiting for install
3L(job has alrady begun, 3L totaly stripped.)
Quaife LSD
Apexi s-afc
Mirko splitter
Joined: May 2000
Posts: 539
J
Member
Offline
Member
J
Joined: May 2000
Posts: 539
WELL EXCUSE ME wink wink


jiako|98 svt silver|kkm true rev|18" Enkie RS5 wrapped w/falken GRB FK451 215/40|Mesh grill|
Sony headunit|Boston Acoutics (4)5X7|Memphis 1100 amp|(2) JL 12W3|KVR X drilled rotors|35% tint|2.25" True Duals w/ Magnaflows| kkm pedals|LSD|Fidnaza Flywheel|Centerforce Dual Friction Clutch|FMS wires|Konis/Eibach|ESP bushings and Mounts|75MM PRO FLOW|DMD|Aluminum shifter & E-brake handle|SAFC|HID's and a few more cc's 196.1 and 183.4
Joined: Aug 2001
Posts: 452
S
svttour Offline OP
Member
OP Offline
Member
S
Joined: Aug 2001
Posts: 452
chill homie no arm intended. smile


99 T-RED SVT
50,555 Miles and counting as off 7/12/2002
born jan 99
UR underdrive pulley
A Pillar Guages w/ AIR/FUEL VOLTS OIL PRESSURE "how to" members.aol.com/samplewon/apillarguageinstall.jpg
B&M short throw shifter
Eibach Springs
BAT Sturts
White Faced HVAC
2 ALPINE TYPE R 12" and ALPINE 1507 V12 AMP
Cup Holder Upgrade
PIAA super white Lows
Whelen 90watt 6 bulb strobe kit
Front end motor mounts

Mods waiting for install
3L(job has alrady begun, 3L totaly stripped.)
Quaife LSD
Apexi s-afc
Mirko splitter
Joined: May 2000
Posts: 539
J
Member
Offline
Member
J
Joined: May 2000
Posts: 539
hey pick up the last issue of SCC last aritcle talks about variable intake lenghts and other types of intakes and the benefits of them


jiako|98 svt silver|kkm true rev|18" Enkie RS5 wrapped w/falken GRB FK451 215/40|Mesh grill|
Sony headunit|Boston Acoutics (4)5X7|Memphis 1100 amp|(2) JL 12W3|KVR X drilled rotors|35% tint|2.25" True Duals w/ Magnaflows| kkm pedals|LSD|Fidnaza Flywheel|Centerforce Dual Friction Clutch|FMS wires|Konis/Eibach|ESP bushings and Mounts|75MM PRO FLOW|DMD|Aluminum shifter & E-brake handle|SAFC|HID's and a few more cc's 196.1 and 183.4
Joined: Aug 2001
Posts: 452
S
svttour Offline OP
Member
OP Offline
Member
S
Joined: Aug 2001
Posts: 452
OK WILL DO..is the contour mentioned in anyway?


99 T-RED SVT
50,555 Miles and counting as off 7/12/2002
born jan 99
UR underdrive pulley
A Pillar Guages w/ AIR/FUEL VOLTS OIL PRESSURE "how to" members.aol.com/samplewon/apillarguageinstall.jpg
B&M short throw shifter
Eibach Springs
BAT Sturts
White Faced HVAC
2 ALPINE TYPE R 12" and ALPINE 1507 V12 AMP
Cup Holder Upgrade
PIAA super white Lows
Whelen 90watt 6 bulb strobe kit
Front end motor mounts

Mods waiting for install
3L(job has alrady begun, 3L totaly stripped.)
Quaife LSD
Apexi s-afc
Mirko splitter
Page 1 of 2 1 2

Moderated by  bnoon_dup1, PA 3L SVT_dup1 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5