Ok, I just bought a new h.u. and attempted to install it today. I thought it was going to be easy but of course not, I had a premium stereo system and had to bypass the amp. I bought a kit at best buy that enabled you to connect the input and output wires going to/from the amp together, but only the input connector would connect to the harness...the output connector was not the same size as the other connector on the harness. So...i cut the connector off and guessed what wires went onto the harnesses wires according to the position on the connector I cut off. I'm tryin my best to explain what I tried to do. So i finished and tried it out, I had power but the speakers weren't wired correctly...couldn't hear anything but a low volume noise from the speakers and tons of distortion. so obviously i wired it all wrong. all i need is a chart stating what the colors on the factory speaker wires connect to on my harness. I have the normal colors on the harness...white, white/black, purple, and so on and so on. The wires that are coming from the speakers are green, blue, white and red, white and orange, brown, and so on and so on. Can anyone help me out with matching all of the wires? Thanks everyone and sorry about the long post.

Originally posted by Kappa2006:

---

Ok, I just bought a new h.u. and attempted to install it today. I thought it was going to be easy but of course not, I had a premium stereo system and had to bypass the amp. I bought a kit at best buy that enabled you to connect the input and output wires going to/from the amp together, but only the input connector would connect to the harness...the output connector was not the same size as the other connector on the harness. So...i cut the connector off and guessed what wires went onto the harnesses wires according to the position on the connector I cut off. I'm tryin my best to explain what I tried to do. So i finished and tried it out, I had power but the speakers weren't wired correctly...couldn't hear anything but a low volume noise from the speakers and tons of distortion. so obviously i wired it all wrong. all i need is a chart stating what the colors on the factory speaker wires connect to on my harness. I have the normal colors on the harness...white, white/black, purple, and so on and so on. The wires that are coming from the speakers are green, blue, white and red, white and orange, brown, and so on and so on. Can anyone help me out with matching all of the wires? Thanks everyone and sorry about the long post.

---

Front Speakers

Left Front (+) White/Black
Left Front (-) Brown/Yellow
Right Front (+) White/Red
Right Front (-) Brown/Yellow

Rear Speakers

Left Rear (+) White/Purple
Left Rear (-) Brown/White
Right Rear (+) White/Purple
Right Rear (-) Brown/White