suspension rebuild time ?s - 01/27/06 08:51 PM
Within two weeks I�ll be replacing my 4 bolt LCAs with ball joints, adding svt springs, struts, strut mounts, and strut bearings. While in there I�ll be putting in new pads and rotors along with SS braided lines I got from BAT up front. I want to knock out as many issues as possible while things are apart.
My car has 215,000 miles on it. Yeah that�s right it�s a real trooper and a Zetec ATX at that. Anyway, should I replace my front sway bar end-links with an upgraded version? I think that someone had made their own using off the shelf Energy suspension pieces and hind joints so I look into that if so. A link would be cool if you know it.
I�ll be doing the cut the bolt and replace upside down method for the front driver�s side bolt out of the LCA. Does anyone know what size and type of bolt I should replace it with?
If you can think of something else I should check or replace please let me know.
Thanks,
Jon
My car has 215,000 miles on it. Yeah that�s right it�s a real trooper and a Zetec ATX at that. Anyway, should I replace my front sway bar end-links with an upgraded version? I think that someone had made their own using off the shelf Energy suspension pieces and hind joints so I look into that if so. A link would be cool if you know it.
I�ll be doing the cut the bolt and replace upside down method for the front driver�s side bolt out of the LCA. Does anyone know what size and type of bolt I should replace it with?
If you can think of something else I should check or replace please let me know.
Thanks,
Jon