Contour Enthusiasts Group CEG

Modifications >> Transaxle

starjammir
Hard-core CEG'er

Reged: 08/14/04
Posts: 1609
Loc: Lapeer, Mi
Re: Cooler Line Flow Direction
#1311207 - 09/02/06 02:01 PM

Originally posted by projectSHO89:
Originally posted by amarv12:
My thought was that under certain conditions it's possible for an external cooler to cool the ATF below the temp of the engine coolant. So if you send it through the external cooler then through the original cooler it might actually heat the fluid up and be working against you....that's why i did it the same way that the original poster was planning. But i have to admit that i don't know typical temps for ATF or engine coolant...so i don't even know if that line of thought is correct...




The integral radiator cooler will be running around 160-200 F, depending on ambient and operating conditions. Normal tranny fluid temps should be 190-220F on the high end. If the fluid is too cool, the computer will not command torque converter lockup.

If cooler climates, an external cooler that exits directly into the transmission may cool the fluid too much and prevent TC lockup aversly affecting fuel economy.

Steve



Hence why I said it doesnt matter what line you cut. I cut the front one cuz it was easier to get to.

--------------------
1998.5 SVT contour #5979 3L
1995 Mercury Mystique 2.5L auto, all ghetto fo sho

Post Extras Print Post Remind Me! Notify Moderator

Entire thread
Subject Posted by Posted on
* Cooler Line Flow Direction mcgarvey 09/01/06 02:35 AM
. * Re: Cooler Line Flow Direction amarv12 09/01/06 02:52 AM
. * Re: Cooler Line Flow Direction amarv12 09/02/06 12:25 AM
. * Re: Cooler Line Flow Direction projectSHO89 09/02/06 01:12 PM
. * Re: Cooler Line Flow Direction starjammir 09/02/06 02:01 PM
. * Re: Cooler Line Flow Direction mcgarvey 09/05/06 01:36 AM
. * Re: Cooler Line Flow Direction mcgarvey 09/05/06 06:44 PM
. * Re: Cooler Line Flow Direction amarv12 09/05/06 06:49 PM
. * Re: Cooler Line Flow Direction starjammir 09/01/06 03:16 PM

Extra information
0 registered and 21 anonymous users are browsing this forum.

Moderator:  RoadRunner, unisys12 



Permissions
You cannot start new topics
You cannot reply to topics
HTML is enabled
UBBCode is enabled

Thread views: 3866

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.02 seconds in which 0.016 seconds were spent on a total of 13 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company