Re: Tubular toe control arms New Pic's
#1097281 - 11/09/05 05:22 PM
Originally posted by Blackcoog: Why would you need to drop the subframe to get the A-arms out? You can just cut the bolt on the transmission side and run the new bolt in from under neath when you install it.
I think you are takling about the front A-arms, and Brad was talking about the rear control arm (box-like arm).
Now about what you suggested, I won't get into this fully, but think about it this way. With the bolts in from the top, if the nut backs off you are still okay, if they are inserted through the bottom and the nut backs off, out drops the bolt and you can take it from there....
Brad and myself see eye to eye on this and discussed it a while back.