Contour Enthusiasts Group CEG

Modifications >> Zetec Performance

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)
ButtonPuncher
Hard-core CEG'er

Reged: 08/16/02
Posts: 1224
Loc: Inbetween turbo and super land.
JRSC SVT Supercharger - first impression
#1285231 - 07/25/06 02:41 AM

I got it today. I'm really excited. ALL of the bolt holes line up and the intake ports and injectors all line up. Check it out...



I'll have to notch the alternator bracket about 3/4" for the manifold to clear. No biggie.


The JRSC M62...


On my new motor with no brackets or alternator.


I apologize for the quality of the pictures. They were all taken with my crappy picture phone. Hopefully I'll have a decent camera after this weekend.

BP

--------------------
Ben ---'96 Contour GL * Zetec ATX * Tan on Black steelies---
+++JRSC M62 Under Construction+++
My big-a$$ mod list.

Post Extras: Print Post Remind Me! Notify Moderator
pre98zetec
CEG'er

Reged: 09/03/04
Posts: 498
Loc: Kennedy, New York
Re: JRSC SVT Supercharger - first impression new
#1285234 (Re: ButtonPuncher) 07/25/06 02:45 AM

I hate you

Ok with that said, I really really do hate you though.

You make me want to finish my tranny off and buy a new one, along with a jrsc.

When you finally get it on you better have tons of videos!

--------------------
96' ATX Zetec- stock

96' ATX Zetec- Modded

Kenwood KDC-319
5.75"-2 MTX 12's
Roady XT
Custom door panels
Mystique Cluster/oil pressure

Getting repainted(in primer)
Pre98 Lip
SE skirts
Mystique front lip
dingless
badgeless

Post Extras: Print Post Remind Me! Notify Moderator
KerryKool
Veteran CEG'er

Reged: 09/29/04
Posts: 979
Loc: Tampa, FL
Re: JRSC SVT Supercharger - first impression new
#1285248 (Re: pre98zetec) 07/25/06 02:57 AM



That is all.

--------------------
My ride(Cardomain link) :

'95 Contour 16V Zetec DOHC, Teal , ATX
Born on Sep. 4, 1995
86+ miles
*LEDs mods are on their way!*

Post Extras: Print Post Remind Me! Notify Moderator
IonNinja
Hard-core CEG'er

Reged: 11/17/02
Posts: 8143
Loc: AZ
Re: JRSC SVT Supercharger - first impression new
#1285376 (Re: KerryKool) 07/25/06 05:59 AM

so what kind of issues do you think you'll run into installation wise?

--------------------
IonNinja
2005 Saturn ION-2 Sedan
1996 Ford Contour GL - Collecting dust...Zetec project anyone?

Post Extras: Print Post Remind Me! Notify Moderator
Nezerconezer
CEG'er

Reged: 07/04/06
Posts: 65
Loc: PHX AZ
Re: JRSC SVT Supercharger - first impression new
#1285483 (Re: ButtonPuncher) 07/25/06 01:19 PM

Good God! thats amazing.

Post Extras: Print Post Remind Me! Notify Moderator
TourDeForce
Hard-core CEG'er

Reged: 03/04/03
Posts: 7117
Loc: West Palm Beach, FL - Going to Jupiter someday
Re: JRSC SVT Supercharger - first impression new
#1285491 (Re: ButtonPuncher) 07/25/06 01:26 PM

I'd like to know if that thing has a cooler of some kind under the compressor...

--------------------
Must be that jumbly-wumbly thing happening again.

Post Extras: Print Post Remind Me! Notify Moderator
mystiquevltwin
Hard-core CEG'er

Reged: 01/28/05
Posts: 1118
Loc: pittsburgh PA
Re: JRSC SVT Supercharger - first impression new
#1285572 (Re: pre98zetec) 07/25/06 03:04 PM

Originally posted by pre98zetec:
I hate you

Ok with that said, I really really do hate you though.






last night, i dreamed about this....this morning i woke up stuck to the bed.

--------------------
kevin m
98 T-red mystique gs
zetec ATX
| my ride |


Post Extras: Print Post Remind Me! Notify Moderator
d c
New CEG'er

Reged: 04/10/04
Posts: 36
Loc: uk
Re: JRSC SVT Supercharger - first impression new
#1285679 (Re: IonNinja) 07/25/06 04:39 PM

Originally posted by IonNinja:
so what kind of issues do you think you'll run into installation wise?




when i fitted the JRSC BBK to my mondeo 2ltr zetec last month i had to use a focus alternator and IAC valve. where the the front alternator bolt goes through, the inner wing was in the way so i used some threaded rod (studding) and fitted it from the inside out and put some loctite on a nut on each end.
the bracket which bolts under the intake manifold (to support the SC) to the block never fitted my engine ( i had a bracket which supports the drive shaft)so i had to modify the support bracket.another thing is you may need a focus fuel rail if you have the earlier zetec engine.
if you are going to use a larger TB you will need a focus throttle bracket if your TB doesnt have one and maybe a focus throttle cable.not sure if you'll (Buttonpuncher) have the same issues hope you dont. by the way my JRSC is the m45.
feel free to ask any questions (if you need to) and i'll do my best to help you
good luck and keep posting pics of your progress



Post Extras: Print Post Remind Me! Notify Moderator
ButtonPuncher
Hard-core CEG'er

Reged: 08/16/02
Posts: 1224
Loc: Inbetween turbo and super land.
Re: JRSC SVT Supercharger - first impression new
#1285691 (Re: d c) 07/25/06 04:53 PM

Thanks for the info. I know that the alternator and support bracket are going to be an issue. Considering that the JRSC was never meant to go on a pre-98 (Silvertop) Zetec. I found out late last night that the passenger side motor mount is going to be a problem. I also just woke up, so I haven't even had a chance to modify that one bracket yet.

Originally posted by TourDeForce:
I'd like to know if that thing has a cooler of some kind under the compressor...




Unfortunately not. The Focus guys are running methanol/water injection for higher boost pressures. If I can find somebody locally, I'm going to modify the manifold and route it through my Spearco water-air intercooler.


Originally posted by mystiquevltwin:
Originally posted by pre98zetec:
I hate you

Ok with that said, I really really do hate you though.






last night, i dreamed about this....this morning i woke up stuck to the bed.




That just ain't right.


BP

--------------------
Ben ---'96 Contour GL * Zetec ATX * Tan on Black steelies---
+++JRSC M62 Under Construction+++
My big-a$$ mod list.

Edited by ButtonPuncher (07/25/06 04:56 PM)

Post Extras: Print Post Remind Me! Notify Moderator
d c
New CEG'er

Reged: 04/10/04
Posts: 36
Loc: uk
Re: JRSC SVT Supercharger - first impression new
#1285866 (Re: ButtonPuncher) 07/25/06 07:05 PM

Originally posted by ButtonPuncher:
Thanks for the info. I know that the alternator and support bracket are going to be an issue. Considering that the JRSC was never meant to go on a pre-98 (Silvertop) Zetec. I found out late last night that the passenger side motor mount is going to be a problem.








there is a guy here in the uk who has fitted a JRSC to his silvertop mondeo.i know he had some issues with getting it to fit. he comes on here from time to time his user name is percybigun. he has a website about his mondeo..... http://www.percybigun.co.uk/mondeo1/mk1index.htm
i know him and he will not mind if you want to send him a pm
he is also on the MEG forum.... http://www.fordmondeo.org/forum/index.php?

Edited by d c (07/25/06 07:23 PM)

Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)


Extra information
0 registered and 13 anonymous users are browsing this forum.

Moderator:  Loco4G63 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 10301

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.019 seconds in which 0.013 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company