Contour Enthusiasts Group CEG

Modifications >> Zetec Performance

Pages: 1 | 2 | 3 | 4 | (show all)
SleeperZ
Hard-core CEG'er

Reged: 04/16/02
Posts: 2483
Loc: near Tacoma, WA
Re: SleeperZ Intake How-To new
#1038356 (Re: Matt R) 08/30/05 09:38 PM

GMK stands for Grand Master Khan (I think thats right).
Its an extension piece (long radius 90 degree bend) that attaches to the CTA (or any short ram) intake that relocaes the filter into the fender.
Requires drilling a hole for the pipe and relocating the fuse box.
The CTA extension for the ZX2 is the same thing.

--------------------
Frank McCoy aka Mod-deth aka Mid Life Crisis aka SVT Doood aka mcgainer is a SCAM ARTIST

Pre98 Zetec - Some Mods

Post Extras: Print Post Remind Me! Notify Moderator
TjZ
Veteran CEG'er

Reged: 09/12/04
Posts: 869
Re: SleeperZ Intake How-To new
#1038795 (Re: SleeperZ) 08/31/05 02:03 PM

Originally posted by SleeperZ:
GMK stands for Grand Master Khan (I think thats right).
Its an extension piece (long radius 90 degree bend) that attaches to the CTA (or any short ram) intake that relocaes the filter into the fender.
Requires drilling a hole for the pipe and relocating the fuse box.
The CTA extension for the ZX2 is the same thing.




That is correct GMK is for Grand Master Khan. He owns a Cougar a nicely modded one. I had the GMK extension on my car before I sold in hopes of getting an SVT *hopes the deal works*. Anyways I will get GMK to send me some pics of mine and I will post it up for ya.

Post Extras: Print Post Remind Me! Notify Moderator
s9contour9e
New CEG'er

Reged: 08/27/05
Posts: 11
Loc: New Jersey
Re: SleeperZ Intake How-To new
#1269073 (Re: TjZ) 06/29/06 04:28 AM

Just a question...where on aj-usa.com do you guys see the silicone couplers? I tired going to the injen page but there is no sign of the couplers there. Thanks in advance.

--------------------
99 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
PeppermintPatty
Hard-core CEG'er

Reged: 03/11/03
Posts: 3195
Loc: NE OH
Re: SleeperZ Intake How-To new
#1269382 (Re: s9contour9e) 06/29/06 05:41 PM

Looks like they changed the site. I have a new set in red if you need them.

--------------------
1999 Sportage 4x4...don't go there, it was free

....______o_o
.../_l l__\____\
..|--l l__----[]\|/[]
.....................oo
=( )_)----( )_)--)_)


Post Extras: Print Post Remind Me! Notify Moderator
s9contour9e
New CEG'er

Reged: 08/27/05
Posts: 11
Loc: New Jersey
Re: SleeperZ Intake How-To new
#1269708 (Re: PeppermintPatty) 06/30/06 12:32 AM

One more question, in what location do you drill the holes? Does anyone have pictures of where they drilled? I pretty much get how everything else is done but before I buy the parts I just wanted to know where the drilled areas are. Thanks

--------------------
99 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
s9contour9e
New CEG'er

Reged: 08/27/05
Posts: 11
Loc: New Jersey
Re: SleeperZ Intake How-To new
#1270798 (Re: s9contour9e) 07/02/06 01:45 AM

Does anyone know? It may be a stupid question I just want to make sure before I go ahead with it.

--------------------
99 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
mystiquevltwin
Hard-core CEG'er

Reged: 01/28/05
Posts: 1118
Loc: pittsburgh PA
Re: SleeperZ Intake How-To new
#1270877 (Re: s9contour9e) 07/02/06 06:05 AM

i put mine inside the 45 degree elbow, i just drilled the whole and i sealed up the sensor with some silicone. i tried drilling though the SS pipe, but i wasnt getting anywhere and i think that with the elbow, its a tighter fit.


sorry no pictures


--------------------
kevin m
98 T-red mystique gs
zetec ATX
| my ride |


Post Extras: Print Post Remind Me! Notify Moderator
s9contour9e
New CEG'er

Reged: 08/27/05
Posts: 11
Loc: New Jersey
Re: SleeperZ Intake How-To new
#1270884 (Re: mystiquevltwin) 07/02/06 06:35 AM

ok i think i finally get it.



So you drilled into there and through the sensor then moved the sensor into the 45 degree elbow?

And can you point me out where to drill into the fender. Is it the spot that is already connected to the airbox?


Thanks!

--------------------
99 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
mystiquevltwin
Hard-core CEG'er

Reged: 01/28/05
Posts: 1118
Loc: pittsburgh PA
Re: SleeperZ Intake How-To new
#1270914 (Re: s9contour9e) 07/02/06 01:36 PM

whoa whoa whoa....... your pointing to the mass air flow sensor in your picture. nothing is drilled into THAT, you dont have to do anything to the MAF, just connect the pipe to it. and unless your doing some kind of special setup, there is no need to drill a whole in the fender. you use the stock airbox and all of the components of that (in the fender at least)



--------------------
kevin m
98 T-red mystique gs
zetec ATX
| my ride |


Post Extras: Print Post Remind Me! Notify Moderator
s9contour9e
New CEG'er

Reged: 08/27/05
Posts: 11
Loc: New Jersey
Re: SleeperZ Intake How-To new
#1271217 (Re: mystiquevltwin) 07/03/06 03:11 AM

If its not the MAf sensor you put in the elbow then what sensor is it? If it's the IAT sensor, where is that?

--------------------
99 Contour SE

Edited by s9contour9e (07/03/06 03:46 AM)

Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | (show all)


Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  Loco4G63 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 10300

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.018 seconds in which 0.011 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company