Contour Enthusiasts Group CEG

General >> Group Buy

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | >> (show all)
Klearz.com
New CEG'er

Reged: 02/05/05
Posts: 18
Loc: Ottawa, Canada
Re: 95-97 clear taillight group buy new
#839327 (Re: 96 M edition) 02/07/05 12:49 AM

corners for most vehicule including the pre 98 is

for 1 person it would be 75 total.
for 2 ppl 60$ each
for 3 ppl 50$ each
for 4 ppl 40$ each
for 5 ppl 30$ each

Post Extras: Print Post Remind Me! Notify Moderator
DemonOfSteel
CEG'er

Reged: 09/28/04
Posts: 108
Loc: Rigaud, Quebec (Canada)
Re: 95-97 clear taillight group buy new
#840782 (Re: Klearz.com) 02/08/05 04:27 AM

I have a question for Klearz.com. I noticed you're from Canada, since I'm from Canada too, can you tell me prices in $CAN for tails and for corners?

--------------------
DemonOfSteel
98 ZX2 Sport
98 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
Klearz.com
New CEG'er

Reged: 02/05/05
Posts: 18
Loc: Ottawa, Canada
Re: 95-97 clear taillight group buy new
#841055 (Re: DemonOfSteel) 02/08/05 02:21 PM

here are the rates with today's exchange rate.
172 for the taillights.
37$ for the corners.

at the time that you pay if the rate is any higher or lower the price would get ajusted.

Post Extras: Print Post Remind Me! Notify Moderator
DemonOfSteel
CEG'er

Reged: 09/28/04
Posts: 108
Loc: Rigaud, Quebec (Canada)
Re: 95-97 clear taillight group buy new
#841214 (Re: Klearz.com) 02/08/05 04:59 PM

so if I understand, you only make the lense, so we need to remove our older lense and get these on. Don't you think it's a little too much for only the lenses? a complete set of taillights is a lot less (about 100$ less) than what you ask for, if it came with a complete assembly, it would have been ok, but I think it's a bit too high only for lenses. Also, the only set of taillights I have is the one that's on my car and I'm affraid to screw it up, especially for the inner part(where the reverse light is). I'm also thinking the same about the corners, but the deal seems more acceptable.

by the way, I don't understand why you're working with a fix US$ price and not a fix CAN$ price. You're in Canada, I don't understand why the cost for someone from the same country as you would adjust dependind on the change rate of $US - $CAN.

--------------------
DemonOfSteel
98 ZX2 Sport
98 Contour SE

Post Extras: Print Post Remind Me! Notify Moderator
Klearz.com
New CEG'er

Reged: 02/05/05
Posts: 18
Loc: Ottawa, Canada
Re: 95-97 clear taillight group buy new
#841300 (Re: DemonOfSteel) 02/08/05 06:16 PM

the price is for the 4 peice lenses.

if you dont want the lens dont buy them. its not everyone that has extra much money and/or wants to have a real custom ride.

those who do want a real custom look, and there are some on this forum who do, they will pay the price that it costs.

someone asked me to come here with my product so i did.
there is no clear lens for your contours on the market, so if you want something right now, we are the only solution.

ofcourse stock lens are going to be alot cheaper then anything custom, thats why they are custom. i am a small shop, i dont mass produce these lens.

its too bad for you guys that the lens dont come off the housing like they do for most vehicules. but does that mean i should lower my prices because its harder for you guys to install them? i dont think so.

my business is based on u.s prices. right now the dollar is really low and who knows it might go even lower. i am not going to be one of those companies that locks in their prices and 6 months later the dollar has changed so much that the price is 10-20$ off.

a good example is a place where i am ordering a custom bumper for my truck. its 150$ on the u.s site, but like 260$ on the canadian site. does that make sense? no it doesnt.
so i am not doing the same thing.

Post Extras: Print Post Remind Me! Notify Moderator
Pre98
Hard-core CEG'er

Reged: 12/31/03
Posts: 4155
Loc: Cheektowaga, NY
Re: 95-97 clear taillight group buy new
#842524 (Re: Klearz.com) 02/09/05 09:25 PM

I'm down for clear corner lenses. I'll check back each day to know progress.

Post Extras: Print Post Remind Me! Notify Moderator
Klearz.com
New CEG'er

Reged: 02/05/05
Posts: 18
Loc: Ottawa, Canada
Re: 95-97 clear taillight group buy new
#842565 (Re: Pre98) 02/09/05 09:46 PM

i guess at this point i am waiting for the donner lenses.
last i heard tour96se was working on those.

once he has them ready he will post them on this site for everyone to approve. then everyone who is signed up can send the down payments, and once i receive the lens i can start production.

i welcome you guys to visit our new request page, and input products that you would like us to produce. its great for getting discounts on future products.

http://www.klearz.com/request/index.php

Post Extras: Print Post Remind Me! Notify Moderator
96 M edition
Hard-core CEG'er

Reged: 03/10/03
Posts: 4292
Re: 95-97 clear taillight group buy new
#842715 (Re: Klearz.com) 02/10/05 12:28 AM

still working on them.....i work 11 hours a day so i have limited time to get these done....but i'm tryin'

--------------------
"Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but STUPID lasts forever."-Aristophanes.
--93 pgt,headers,intake,borla=14.9 1/4mile



Post Extras: Print Post Remind Me! Notify Moderator
TOUR'ING
CEG'er

Reged: 12/31/02
Posts: 98
Loc: NC, USA
Re: 95-97 clear taillight group buy new
#842913 (Re: Klearz.com) 02/10/05 03:26 AM

What kind of turn-around time would be looking at for the clear corners? Providing you have the samples to get going?

Post Extras: Print Post Remind Me! Notify Moderator
Klearz.com
New CEG'er

Reged: 02/05/05
Posts: 18
Loc: Ottawa, Canada
Re: 95-97 clear taillight group buy new
#842952 (Re: TOUR'ING) 02/10/05 04:07 AM

once i have all the down payments and lenses in hand, depending on how busy we are we would have something to show in 2-3 weeks, most likely it would be more like 1 week.

Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | >> (show all)


Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  1314 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 2225

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.093 seconds in which 0.086 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company