Contour Enthusiasts Group CEG

General >> Group Buy

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
GB - Updated Camber Kit Plates
#1209212 - 04/06/06 01:46 PM

OK - It is now official - I am starting a group buy on the updated camber plates for the SPC camber plate kit. These are twice as thick as the SPC plates, and will not bend or deform like the originals tend to do. These are a PRT design (pole120), with an honorable mention going out to Thinkmoto. These are basically the same plates that were offered a while back in this post. I am offering a powdercoating service in this package as well - there should be more than enough colors available to keep everyone happy. The pricing for the bare plates also remains unchanged from the previous run.

Pricing for a set (2 plates) is:

For the US:

Bare Machined: $40
Powdercoated Black: $50
Powdercoated Color of Choice – “Standard” or “Specialty” Colors listed here: $55
Add $3 for Hi-Tech or Iridescent colors (use above link) since they involve multi stage colors and curing process.

For the Canucks:

Bare Machined: $50
Powdercoated Black: $60
Powdercoated Color of Choice – “Standard” or “Specialty” Colors listed here: $65
Add $3 for Hi-Tech or Iridescent colors (use above link) since they involve multi stage colors and curing process.

These prices include shipping. Please note for custom colors - place your orders as soon as possible so I ensure that I have the color in stock before I receive the parts. Otherwise your parts will be delayed the time it takes for my supplier to ship the powder to me.

I will also knock off $5 for orders of 2 sets or more.

Lead time on these will be 3-4 weeks (From the date of this post and not of your order) until I have them all in my hand and ready to ship. I will ship immediately upon receiving. These will arrive with plenty of time to have these on your car for Spring Zing!!

Payments can be sent via Paypal to copocraig@hotmail.com .

Please include your shipping information and your CEG screen name. If you want them powdercoated, clearly state the color you would like based on the color selections here. For additional information please PM or email me. I can also provide sample images of actual powdercoated parts (if I have done the colors) if anyone is curious what the colors look like. I will keep this post updated with a list as purchases are confirmed, and as they are paid for.

Black Powdercoated Plates:


Black Powdercoated Plate Installed (using OEM rubber grommet)



CAD design:



--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
muntus
Veteran CEG'er

Reged: 12/30/04
Posts: 595
Loc: On the road, again.
Re: GB - Updated Camber Kit Plates new
#1209271 (Re: SVTforme) 04/06/06 03:09 PM

What material are the plates made from?

--------------------
Black 1998.5
3L Oval Port
Full HMS Transmission
Lots of other stuff
Ressurected 06/14/06

Post Extras: Print Post Remind Me! Notify Moderator
MapOfTaziFoSho
Hard-core CEG'er

Reged: 09/01/02
Posts: 9065
Loc: The E.L.
Re: GB - Updated Camber Kit Plates new
#1209354 (Re: muntus) 04/06/06 04:53 PM

interested but prob won't pop for it. I'm 50/50

--------------------
Born again on 04/09/06
FOR SALE:
Moonroof glass and motor MB sunshade
PM ME!


Post Extras: Print Post Remind Me! Notify Moderator
GI8U2racing
New CEG'er

Reged: 10/04/05
Posts: 32
Loc: Blacksburg, VA
Re: GB - Updated Camber Kit Plates new
#1209434 (Re: MapOfTaziFoSho) 04/06/06 05:47 PM

I might do it. How bad are the ones that come with the kit exactly?

--------------------
Thanks,
Jonathan Baker

http://gi8u2racing.cougardb.com


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1209445 (Re: muntus) 04/06/06 05:56 PM

Mild Steel (1020).

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
muntus
Veteran CEG'er

Reged: 12/30/04
Posts: 595
Loc: On the road, again.
Re: GB - Updated Camber Kit Plates new
#1209479 (Re: SVTforme) 04/06/06 06:37 PM

Might there be another upgrade to stainless steel?

--------------------
Black 1998.5
3L Oval Port
Full HMS Transmission
Lots of other stuff
Ressurected 06/14/06

Post Extras: Print Post Remind Me! Notify Moderator
XKontour98
Hard-core CEG'er

Reged: 09/18/02
Posts: 3709
Loc: Rochester, Minnesota
Re: GB - Updated Camber Kit Plates new
#1209507 (Re: SVTforme) 04/06/06 07:16 PM

Does it come with the nuts like in the pic?

--------------------
Originally posted by Chickens:
Religion can't do much for ashholes (unless you are an alterboy)















98.5 Se w/SVT mods
98 E0 SVT~ sold


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1209512 (Re: XKontour98) 04/06/06 07:19 PM

Just the plates - the nuts come with the camber kit so you should already have those.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
sonza68
CEG'er

Reged: 04/23/04
Posts: 94
Loc: Chesterfield, MO
Re: GB - Updated Camber Kit Plates new
#1209623 (Re: SVTforme) 04/06/06 09:29 PM

Do the prices listed include shipping?

--------------------
Tom
'00 Cougar
'95 Mark VIII

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1209698 (Re: sonza68) 04/06/06 11:25 PM

Sure does - Anywhere in North America.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
GI8U2racing
New CEG'er

Reged: 10/04/05
Posts: 32
Loc: Blacksburg, VA
Re: GB - Updated Camber Kit Plates new
#1209727 (Re: SVTforme) 04/07/06 12:30 AM

Alright I'll do it, when are you gonna start making some?

--------------------
Thanks,
Jonathan Baker

http://gi8u2racing.cougardb.com


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1209738 (Re: GI8U2racing) 04/07/06 12:42 AM

Order is in (getting them done CNC in bulk).. I will have more than enough to go around in 3 weeks time.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
XKontour98
Hard-core CEG'er

Reged: 09/18/02
Posts: 3709
Loc: Rochester, Minnesota
Re: GB - Updated Camber Kit Plates new
#1209743 (Re: SVTforme) 04/07/06 12:47 AM

Originally posted by SVTforme:
Just the plates - the nuts come with the camber kit so you should already have those.




So we would still need to buy a camber kit if we dont have one already?

--------------------
Originally posted by Chickens:
Religion can't do much for ashholes (unless you are an alterboy)















98.5 Se w/SVT mods
98 E0 SVT~ sold


Post Extras: Print Post Remind Me! Notify Moderator
KingpinSVT
Addicted CEG'er

Reged: 05/21/03
Posts: 5600
Loc: Ocala, FL
Re: GB - Updated Camber Kit Plates new
#1209828 (Re: XKontour98) 04/07/06 02:04 AM

This plate servers 0 (ZERO) purpose without the camber plates!!!!!

And yes, you would have to get them seperately.

--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT

FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!

Post Extras: Print Post Remind Me! Notify Moderator
muntus
Veteran CEG'er

Reged: 12/30/04
Posts: 595
Loc: On the road, again.
Re: GB - Updated Camber Kit Plates new
#1209832 (Re: KingpinSVT) 04/07/06 02:07 AM

Originally posted by KingpinSVT:
This plate servers 0 (ZERO) purpose without the camber plates!!!!!

And yes, you would have to get them seperately.




Are these thing unnecessary until after you upgrade your suspension?

--------------------
Black 1998.5
3L Oval Port
Full HMS Transmission
Lots of other stuff
Ressurected 06/14/06

Post Extras: Print Post Remind Me! Notify Moderator
XKontour98
Hard-core CEG'er

Reged: 09/18/02
Posts: 3709
Loc: Rochester, Minnesota
Re: GB - Updated Camber Kit Plates new
#1210303 (Re: KingpinSVT) 04/07/06 03:47 PM

Good deal thanks man!

--------------------
Originally posted by Chickens:
Religion can't do much for ashholes (unless you are an alterboy)















98.5 Se w/SVT mods
98 E0 SVT~ sold


Post Extras: Print Post Remind Me! Notify Moderator
KingpinSVT
Addicted CEG'er

Reged: 05/21/03
Posts: 5600
Loc: Ocala, FL
Re: GB - Updated Camber Kit Plates new
#1210623 (Re: muntus) 04/07/06 08:34 PM

Originally posted by muntus:
Originally posted by KingpinSVT:
This plate servers 0 (ZERO) purpose without the camber plates!!!!!

And yes, you would have to get them seperately.




Are these thing unnecessary until after you upgrade your suspension?




They are unnecessary until you have adjustable camber plates which are only used if you have lowered your car beyond about 1.25-1.5".



Sorry for the thread clutter. On topic, I may be in. Ill let you know soon.

--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT

FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!

Post Extras: Print Post Remind Me! Notify Moderator
JEDsContour
Veteran CEG'er

Reged: 12/06/02
Posts: 937
Loc: Marshall VA, USA
Re: GB - Updated Camber Kit Plates new
#1210744 (Re: KingpinSVT) 04/08/06 12:45 AM

Sent money for two sets (4 plates) powder coated black.

Thanks SVTForme for making this happen!

--------------------
99 Tropic Green SVT, Tan Leather, 20K miles, "Nice Twin" (factory stock).
99 Tropic Green SVT, Tan Leather, 28K miles, "Evil Twin" (Turbo AER 3L and more in progress)
96 Red LX, Opal Grey Leather 2.5L, ATX, 22K miles

Post Extras: Print Post Remind Me! Notify Moderator
98SVTC
CEG'er

Reged: 12/17/01
Posts: 460
Loc: Rowland Heights, Ca.
Re: GB - Updated Camber Kit Plates new
#1210756 (Re: SVTforme) 04/08/06 01:00 AM

How long will you be offering these plates? I don't have a camber kit yet as I'm waiting for my D2 coilovers to be built and delivered. I'll then need to find out if the SPC or BAT camber kits will fit the D2 struts. If I go with the SPC kit, I'll order your upgraded plates. But it might be a while.
Karl

--------------------
*** It's all about consistency! ***
*** Previously 88SVT ***

06 F150 Supercrew 5.4L FX4
98 SVT Contour #4362 Born 1/6/1998
86 Ranger GT (For Sale)
69 Fiat 850 Sport Spider (For Sale)
67 Formula-S Barracuda

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1210764 (Re: 98SVTC) 04/08/06 01:20 AM

I am making enough to last a while. You should be covered.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
mysticalillusion
CEG'er

Reged: 09/01/02
Posts: 189
Re: GB - Updated Camber Kit Plates new
#1210942 (Re: SVTforme) 04/08/06 07:13 AM

i would like a set in black let me know when i can get them and i will get the money to u shortly after


Post Extras: Print Post Remind Me! Notify Moderator
KingpinSVT
Addicted CEG'er

Reged: 05/21/03
Posts: 5600
Loc: Ocala, FL
Re: GB - Updated Camber Kit Plates new
#1211134 (Re: 98SVTC) 04/08/06 06:47 PM

Originally posted by 88SVT:
If I go with the SPC kit, I'll order your upgraded plates. But it might be a while.
Karl




SPC and BAT kits are the same thing.

--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT

FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1211241 (Re: KingpinSVT) 04/08/06 09:58 PM

I'm down for a set!

When will you be accepting payment?

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1211268 (Re: SkyRyder) 04/08/06 10:42 PM

I'll take payment anytime you want to send it. As it says in the post, parts will not be in until 3 weeks from now, although the parts are being made as we speak.

I already have several orders paid for already. I will post the complete updated list in a day or so.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1211368 (Re: SVTforme) 04/09/06 03:03 AM

Ok I will be sending payment in 2 weeks from now

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1211663 (Re: SkyRyder) 04/09/06 08:15 PM

Here's an update as of today..

Paid:
incubusjunkie614 - Black
JEDsContour - Black x2

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
88SVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
GI8U2racing
KingpinSVT
mysticalillusion
SkyRyder
mapoftazifosho™

Keep the orders coming!!

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
98SVTC
CEG'er

Reged: 12/17/01
Posts: 460
Loc: Rowland Heights, Ca.
Re: GB - Updated Camber Kit Plates new
#1212698 (Re: KingpinSVT) 04/10/06 10:34 PM

Originally posted by KingpinSVT:
Originally posted by 88SVT:
If I go with the SPC kit, I'll order your upgraded plates. But it might be a while.
Karl




SPC and BAT kits are the same thing.


That's discouraging. I was hoping there would be a quality difference. I guess that means the plate will eventually bend on the BAT kit?
Karl

--------------------
*** It's all about consistency! ***
*** Previously 88SVT ***

06 F150 Supercrew 5.4L FX4
98 SVT Contour #4362 Born 1/6/1998
86 Ranger GT (For Sale)
69 Fiat 850 Sport Spider (For Sale)
67 Formula-S Barracuda

Post Extras: Print Post Remind Me! Notify Moderator
KingpinSVT
Addicted CEG'er

Reged: 05/21/03
Posts: 5600
Loc: Ocala, FL
Re: GB - Updated Camber Kit Plates new
#1212706 (Re: 98SVTC) 04/10/06 10:48 PM

Yup!

--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT

FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1224788 (Re: KingpinSVT) 04/26/06 02:18 AM

payment sent

I was a little worried since you are non-verified and have 0 transactions - whats up with that?

Edited by SkyRyder (04/26/06 02:23 AM)

Post Extras: Print Post Remind Me! Notify Moderator
GI8U2racing
New CEG'er

Reged: 10/04/05
Posts: 32
Loc: Blacksburg, VA
Re: GB - Updated Camber Kit Plates new
#1225014 (Re: SkyRyder) 04/26/06 06:46 AM

So are they almost ready? I'll pay you now if that's the case

--------------------
Thanks,
Jonathan Baker

http://gi8u2racing.cougardb.com


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1225080 (Re: GI8U2racing) 04/26/06 01:17 PM

I expect them any day now. I will check with the supplier today and let everyone know.

As for Paypal, I only started using it as of late for accepting payment as I was trying to avoid their transfer fees, but in the end convenience won over.

Updated list:

Paid:
incubusjunkie614 - Black
JEDsContour - Black x2
SkyRyder - Bare
Rikenbomb (NECO) - Black
sonza68 - Black

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
88SVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
GI8U2racing
KingpinSVT
mysticalillusion
mapoftazifosho™

Keep 'em coming - I have an investment to recover .


--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
sonza68
CEG'er

Reged: 04/23/04
Posts: 94
Loc: Chesterfield, MO
Re: GB - Updated Camber Kit Plates new
#1226036 (Re: GI8U2racing) 04/27/06 01:20 PM

How are these coming along?

--------------------
Tom
'00 Cougar
'95 Mark VIII

Post Extras: Print Post Remind Me! Notify Moderator
sonza68
CEG'er

Reged: 04/23/04
Posts: 94
Loc: Chesterfield, MO
Re: GB - Updated Camber Kit Plates new
#1226184 (Re: sonza68) 04/27/06 03:28 PM

Nevermind me, I didn't see that last post from Craig.

--------------------
Tom
'00 Cougar
'95 Mark VIII

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1228650 (Re: sonza68) 04/30/06 10:48 PM

Update:

I expect them any day now. Supplier said they should be in the mail this week, next week at the latest. Sorry about the delay! I should have done this in the winter when noone was modding their cars .

Paid:
incubusjunkie614 - Black
JEDsContour - Black x2
SkyRyder - Bare
Rikenbomb (NECO) - Black
sonza68 - Black
GI8U2racing - Black

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
88SVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
KingpinSVT
mysticalillusion
mapoftazifosho™

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
98SVTC
CEG'er

Reged: 12/17/01
Posts: 460
Loc: Rowland Heights, Ca.
Re: GB - Updated Camber Kit Plates new
#1229095 (Re: SVTforme) 05/01/06 05:25 PM

Money sent!
Karl

--------------------
*** It's all about consistency! ***
*** Previously 88SVT ***

06 F150 Supercrew 5.4L FX4
98 SVT Contour #4362 Born 1/6/1998
86 Ranger GT (For Sale)
69 Fiat 850 Sport Spider (For Sale)
67 Formula-S Barracuda

Post Extras: Print Post Remind Me! Notify Moderator
GI8U2racing
New CEG'er

Reged: 10/04/05
Posts: 32
Loc: Blacksburg, VA
Re: GB - Updated Camber Kit Plates new
#1230198 (Re: 98SVTC) 05/02/06 07:33 PM

Alright, I just got the camber plates. So it says +/- 1 deg, so does that mean u can put the plates so the bolt is toward the outside of the car, get it aligned for 0-.5 deg, then rotate it to the inside of the car and get 2 degrees of camber? Does it make a noticeable difference?

--------------------
Thanks,
Jonathan Baker

http://gi8u2racing.cougardb.com


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1232718 (Re: GI8U2racing) 05/05/06 09:15 PM

You should not have any problem getting the settings you want. I had no prob at all getting the factory settings, and it was also easy to adjust the camber for the track. One thing to note is that when you change the camber, it also changes the caster. The rate at which it changes the caster depends on where on the rotation you are.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1232720 (Re: SVTforme) 05/05/06 09:19 PM

OK.. finally the day has come.. look at what Mr. UPS brought me today.. lets just say there should be enough to go around, and there are many more to unwrap.



I will be powdercoating them this weekend, and they will be shipped out on Monday. I will be powdercoating many sets, so they will be ready to ship out immediately upon payment.

Here is the latest list as of today.

Paid:
incubusjunkie614 - Black
JEDsContour - Black x2
SkyRyder - Bare
Rikenbomb (NECO) - Black
sonza68 - Black
GI8U2racing - Black
88SVT - Black

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
KingpinSVT
mysticalillusion
mapoftazifosho™

Get your orders in now!!

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1233588 (Re: SVTforme) 05/07/06 11:00 PM

sweet can't wait

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1238821 (Re: SkyRyder) 05/15/06 02:08 AM

Sorry for the delay.. yet another update:

Paid:
incubusjunkie614 - Black (Shipped)
JEDsContour - Black x2 (Shipped)
SkyRyder - Bare (Shipped)
Rikenbomb (NECO) - Black (Shipped)
sonza68 - Black (Shipped)
GI8U2racing - Black (Shipped)
88SVT - Black (Shipped)

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
KingpinSVT
mysticalillusion
mapoftazifosho™

Any more takers?

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1239424 (Re: SVTforme) 05/15/06 09:34 PM

Thanks Craig got mine today!

Post Extras: Print Post Remind Me! Notify Moderator
R_G
Hard-core CEG'er

Reged: 05/02/03
Posts: 5621
Loc: New Jersey
Re: GB - Updated Camber Kit Plates new
#1240327 (Re: SkyRyder) 05/17/06 02:09 AM

I got the reinforced plates from the previous GB but would like to get a pair of powdercoated ones. Ready to pay on Thursday. Please PM me for the PayPal details and else...

--------------------
MY CAR

Post Extras: Print Post Remind Me! Notify Moderator
SkyRyder
New CEG'er

Reged: 03/17/06
Posts: 10
Re: GB - Updated Camber Kit Plates new
#1240411 (Re: R_G) 05/17/06 03:56 AM

Damn such a simple swap and I had to run into problems.
I went to unbolt the passenger side and the bolt kept rotating without coming loose. The bolt was rotating the entire Koni strut.

How in the hell can I get this loose? any ideas?

(The driver side unbolted with no problems.)

Edited by SkyRyder (05/17/06 03:56 AM)

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1240451 (Re: SkyRyder) 05/17/06 05:11 AM

Sounds like the nut below the plate is loose. You can try using an impact gun to remove it (I wouldn't suggest using it to reinstall though). Otherwise I used one of these ratchets:


Once you get the plate off, make sure and tighten the nut below it to ensure that you don't run into this same problem again .

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
98SVTC
CEG'er

Reged: 12/17/01
Posts: 460
Loc: Rowland Heights, Ca.
Re: GB - Updated Camber Kit Plates new
#1241082 (Re: SkyRyder) 05/18/06 01:44 AM

Got mine yesterday! Camber plate kit on the way too! Now all I have to wait for are the D2 coilover kits.
Karl

--------------------
*** It's all about consistency! ***
*** Previously 88SVT ***

06 F150 Supercrew 5.4L FX4
98 SVT Contour #4362 Born 1/6/1998
86 Ranger GT (For Sale)
69 Fiat 850 Sport Spider (For Sale)
67 Formula-S Barracuda

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1241728 (Re: 98SVTC) 05/19/06 10:02 PM

Another update:

Paid:
incubusjunkie614 - Black (Shipped)
JEDsContour - Black x2 (Shipped)
SkyRyder - Bare (Shipped)
Rikenbomb (NECO) - Black (Shipped)
sonza68 - Black (Shipped)
GI8U2racing - Black (Shipped)
88SVT - Black (Shipped)
contoursvt11 - Black (Shipped)
Checker'd SVT - Bare (Shipped)

Interested (Based on PM's and past posts):
Jeb Hoge
ohsigmachi
SQLSVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
KingpinSVT
mysticalillusion
mapoftazifosho™
R_G
Dino Macri

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1262564 (Re: SVTforme) 06/20/06 02:57 AM

Another update:

Paid:
incubusjunkie614 - Black (Shipped)
JEDsContour - Black x2 (Shipped)
SkyRyder - Bare (Shipped)
Rikenbomb (NECO) - Black (Shipped)
sonza68 - Black (Shipped)
GI8U2racing - Black (Shipped)
88SVT - Black (Shipped)
contoursvt11 - Black (Shipped)
Checker'd SVT - Bare (Shipped)
Shamun - Black (Shipped)
mysticalillusion - Black

And the rest of the interested people.. are you still interested??? .

Jeb Hoge
ohsigmachi
SQLSVT
WillBob
Rawburt (90% in)
NVS SVT
XKontour98
KingpinSVT
mapoftazifosho™
R_G
Dino Macri

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
starjammir
Hard-core CEG'er

Reged: 08/14/04
Posts: 1609
Loc: Lapeer, Mi
Re: GB - Updated Camber Kit Plates new
#1290203 (Re: SVTforme) 07/31/06 03:23 PM

Is this still good, as I need to get some

--------------------
1998.5 SVT contour #5979 3L
1995 Mercury Mystique 2.5L auto, all ghetto fo sho

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1290245 (Re: starjammir) 07/31/06 04:30 PM

Still have sets left. I have bare and black powdercoat ready to ship as soon I receive payment.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
starjammir
Hard-core CEG'er

Reged: 08/14/04
Posts: 1609
Loc: Lapeer, Mi
Re: GB - Updated Camber Kit Plates new
#1290247 (Re: SVTforme) 07/31/06 04:31 PM

OK, thanks Ill check the bank account tom and let you know

--------------------
1998.5 SVT contour #5979 3L
1995 Mercury Mystique 2.5L auto, all ghetto fo sho

Post Extras: Print Post Remind Me! Notify Moderator
MapOfTaziFoSho
Hard-core CEG'er

Reged: 09/01/02
Posts: 9065
Loc: The E.L.
Re: GB - Updated Camber Kit Plates new
#1290487 (Re: starjammir) 07/31/06 08:58 PM

I could use the black ones. IF possible ca I pick them up!? I live close enough.


--------------------
Born again on 04/09/06
FOR SALE:
Moonroof glass and motor MB sunshade
PM ME!


Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1290729 (Re: starjammir) 08/01/06 02:03 AM

Originally posted by starjammir:
OK, thanks Ill check the bank account tom and let you know




No prob. Camber kit plates await you.

Originally posted by MapOfTaziFoSho :

I could use the black ones. IF possible ca I pick them up!? I live close enough.




Sure thing - drop me a PM and we can set something up.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
Kremithefrog
I have no life

Reged: 05/14/02
Posts: 21653
Loc: Albany, Georgia
Re: GB - Updated Camber Kit Plates new
#1290832 (Re: SVTforme) 08/01/06 03:57 AM

Any more left? and where do I go for the rest of the kit, BAT still carry em?

--------------------
98.5 SVT
91 Escort GT (almost sold)
96 ATX Zetec (i brake to watch you swerve)

FS: SVT rear sway bar
WTB: Very cheap beater

CEG Dragon Run - October 13-15

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1291156 (Re: Kremithefrog) 08/01/06 04:09 PM

I still have quite a few left.

I had to make a bunch of them to make it worthwhile and bring the piece cost down to a reasonable price.

The kits are still up on ebay - thats where I bought mine. That was the cheapest price I could find: Ebay item # 8033553383

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVT SNOB
Hard-core CEG'er

Reged: 07/17/01
Posts: 2974
Loc: Burlington, ON
Re: GB - Updated Camber Kit Plates new
#1291183 (Re: SVTforme) 08/01/06 04:28 PM

Craig, I will be getting 2 sets, but can't for another 2-3 weeks will that be ok? Just to make sure these are adjustable right?

Aaron

--------------------
AKA NVS SVT
98.5 Silver/Blue SVT#4553
Yeah it's modded
98 T-Red/Blue SVT Contour Totaled 06/05/06
03 3L,VCN 2000,CAT Cams,MSDS Headers w/Y-Pipe,XCal2 and lots more



Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1291210 (Re: SVT SNOB) 08/01/06 04:53 PM

Sure thing. This group buy is for the upgraded plates for the camber kit in the link above (Just to be clear).

These are adjustable by rotating the upper mount relative to the body of the vehicle. They are adjustable, but the camber and caster will both change when the mount is rotated (not as precise as the typical mustang camber kits).

I had no issues in aligning my car after installing a Koni kit.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVT SNOB
Hard-core CEG'er

Reged: 07/17/01
Posts: 2974
Loc: Burlington, ON
Re: GB - Updated Camber Kit Plates new
#1291217 (Re: SVTforme) 08/01/06 04:58 PM

Perfect, I shall be picking up 2 sets within 2-3 weeks . Hope that is ok.

Aaron

--------------------
AKA NVS SVT
98.5 Silver/Blue SVT#4553
Yeah it's modded
98 T-Red/Blue SVT Contour Totaled 06/05/06
03 3L,VCN 2000,CAT Cams,MSDS Headers w/Y-Pipe,XCal2 and lots more



Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1292953 (Re: SVT SNOB) 08/03/06 04:26 PM

Not a problem.

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
starjammir
Hard-core CEG'er

Reged: 08/14/04
Posts: 1609
Loc: Lapeer, Mi
Re: GB - Updated Camber Kit Plates new
#1292958 (Re: SVTforme) 08/03/06 04:30 PM

Can these be used with a front strut brace? Just curious

--------------------
1998.5 SVT contour #5979 3L
1995 Mercury Mystique 2.5L auto, all ghetto fo sho

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1293741 (Re: starjammir) 08/04/06 06:21 PM

I am not 100% sure on this, but I don't see why they wouldn't work. They occupy roughly the same amount of space radially as the base plates with rubber isolators.

This is what they look like installed with the OEM rubber isolator.



--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
R_G
Hard-core CEG'er

Reged: 05/02/03
Posts: 5621
Loc: New Jersey
Re: GB - Updated Camber Kit Plates new
#1295188 (Re: SVTforme) 08/07/06 02:31 PM

Money sent

--------------------
MY CAR

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1295284 (Re: R_G) 08/07/06 04:39 PM

Update:

Paid/Shipped:
Checkered'd SVT - Bare (Shipped)
incubusjunkie614 - Black (Shipped)
JEDsContour - Black x2 (Shipped)
SkyRyder - Bare (Shipped)
Rikenbomb (NECO) - Black (Shipped)
sonza68 - Black (Shipped)
GI8U2racing - Black (Shipped)
contourSVT11 - Black (Shipped)
Shamun - Black (Shipped)
88SVT - Black (Shipped)
mysticalillusion - Black (Shipped)
RG - Red (Shipped)

Interested as of late:
SVT SNOB x 2
mapoftazifosho™
Kremithefrog
starjammir
bensenvill
ohsigmachi

Interested once upon a time:
Jeb Hoge
SQLSVT
WillBob
Rawburt (90% in)
XKontour98
KingpinSVT

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1295285 (Re: R_G) 08/07/06 04:42 PM

Originally posted by R_G:
Money sent



Thanks - radiant red parts are done and will be shipped out today.

I have lots more powdercoated black that are ready to ship as soon as I receive paymant.



--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
SVT SNOB
Hard-core CEG'er

Reged: 07/17/01
Posts: 2974
Loc: Burlington, ON
Re: GB - Updated Camber Kit Plates new
#1295318 (Re: SVTforme) 08/07/06 05:17 PM

NVS SVT can be taken off the interested once upon a time list since I am him lol.

Aaron

--------------------
AKA NVS SVT
98.5 Silver/Blue SVT#4553
Yeah it's modded
98 T-Red/Blue SVT Contour Totaled 06/05/06
03 3L,VCN 2000,CAT Cams,MSDS Headers w/Y-Pipe,XCal2 and lots more



Post Extras: Print Post Remind Me! Notify Moderator
SVTforme
CEG'er

Reged: 09/23/01
Posts: 313
Loc: Windsor, ON / Allen Park, MI
Re: GB - Updated Camber Kit Plates new
#1311725 (Re: SVTforme) 09/03/06 04:12 PM

Yet Another Update:

As for all of the "interested" parties.. are you still interested?? I have an investment to recover here .

Paid/Shipped:
Checkered'd SVT - Bare (Shipped)
incubusjunkie614 - Black (Shipped)
JEDsContour - Black x2 (Shipped)
SkyRyder - Bare (Shipped)
Rikenbomb (NECO) - Black (Shipped)
sonza68 - Black (Shipped)
GI8U2racing - Black (Shipped)
contourSVT11 - Black (Shipped)
Shamun - Black (Shipped)
88SVT - Black (Shipped)
mysticalillusion - Black (Shipped)
RG - Red (Shipped)
SVT SNOB - Black (Shipped)

Interested as of late:
Dino Macri
SVT SNOB one more..
MapOfTaziFoSho
Kremithefrog
starjammir
bensenvill
ohsigmachi
White99SE

Interested once upon a time:
Jeb Hoge
SQLSVT
WillBob
Rawburt (90% in)
XKontour98
KingpinSVT

--------------------
Craig
1999 SVT Contour #1889
2001 SVT Cobra Conv. #252
1968 Torino GT Fastback
1969 Camaro RS/SS

Post Extras: Print Post Remind Me! Notify Moderator
Kremithefrog
I have no life

Reged: 05/14/02
Posts: 21653
Loc: Albany, Georgia
Re: GB - Updated Camber Kit Plates new
#1311805 (Re: SVTforme) 09/03/06 08:37 PM

No longer interested. Thanks though.

--------------------
98.5 SVT
91 Escort GT (almost sold)
96 ATX Zetec (i brake to watch you swerve)

FS: SVT rear sway bar
WTB: Very cheap beater

CEG Dragon Run - October 13-15

Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | (show all)


Extra information
0 registered and 30 anonymous users are browsing this forum.

Moderator:  1314 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 9911

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.019 seconds in which 0.01 seconds were spent on a total of 13 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company