|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
What would you like to see come out of PRT?
#1269373 - 06/29/06 12:31 PM
|
|
|
Loking for CEG's input on products and services to be released from PRT's shop for the CDW-27 crowd. I've got several products in mind and in the works that are listed below, but i'ld also love for you guys to supply me with any products you'ld like to see released.
Suspension:
-Boxed front 2-bolt LCA's with shperical bearings in place of the bushings
-Tubular forward and rear arms for the rear suspension
-Tubular and triangulated RSTB
-Upgraded rear subframes
-Spherical endlinks for front and rear swaybars
-Front LCA boxing plates for 2 and 4 bolt arms
-Harness bar, perhaps with a camera mount
Performance:
-Beyond-optimized y-pipe, steps are taken to go beyond the usual optimiation for maximum flow, will be flow tested.
-Optimized TB's
-Fiberglass heatshields
-Fiberglass pin-on hood and trunk
-Mandrel cat-back fabrication
Asthetics:
-Powder and ceramic coating at insanly good prices
-Fiberglass paintable tank(p/s,brake,overflow) and battery covers, i may also look into haveing them CF wraped
-Acid dipped badges, antenna bases, grill rings for painting
-Badgeless SVT stock mesh grill - still working on this, may or may not happen on a more than one scale.
-Molded\repaired Splitters - no job too big, you'll see what i mean soon enough 
-Molded jack-point covers into skirts
-Molded gauge pod in place of coin tray
-Shaved front keyhole door handles
-Mirko skidplates
Services:
-Intake re-bilding
-Suspension swaps
-Header installs
....i've done most everything maintanance wise at least once.
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
striker2
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 03/15/04
|
|
Posts: 536
|
|
Loc: Glendale Heights, Il (for now)
|
|
|
tubular frt lower control arms with adjustable ball joints, and camber/caster adjustments for both 2 and 4 bolt designs (2 bolt will be easier obviosly, could use poly bushings or spherical links)
adjustable tie-rod ends to help eliminate bump steer for those that have extremly lowered their car.
frt strut tower braces that bolt to the towers and the firewall for added rigidity.
thats all i can think of for now.
--------------------
97 contour gl mtx
front & rear upper strut tower braces
19mm bat sway bar
Koni struts w/GC knockoffs
Post Extras:
|
|
Matt R
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 06/06/04
|
|
Posts: 3065
|
|
Loc: Saratoga Springs, NY
|
|
|
Originally posted by striker2:
frt strut tower braces that bolt to the towers and the firewall for added rigidity.
Excellent idea.
--------------------
-Matt R
'99 Tropic Green LX, Zetec, ATX
Post Extras:
|
GTO Pete
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 04/07/01
|
|
Posts: 5975
|
|
Loc: Rockville, Maryland
|
|
|
Some kind of high-strength, clear plastic to help protect all the breaking foglights.
--------------------
Capitol CEG Classifieds
Make an offer!
2005 GTO IBM - 337hp/336tq
Post Extras:
|
|
Jeb Hoge
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 07/23/01
|
|
Posts: 3037
|
|
Loc: Midlothian, VA
|
|
|
Continued improvement on camber kits.
--------------------
"Think of it, if you like, as a librarian with a G-string under the tweed." Clarkson on the Mondeo.
Post Extras:
|
|
GTO Pete
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 04/07/01
|
|
Posts: 5975
|
|
Loc: Rockville, Maryland
|
|
|
Originally posted by Matt R:
Originally posted by striker2:
frt strut tower braces that bolt to the towers and the firewall for added rigidity.
Excellent idea.
Front strut tower bar that works with the camber kit.
--------------------
Capitol CEG Classifieds
Make an offer!
2005 GTO IBM - 337hp/336tq
Post Extras:
|
|
mystiquevltwin
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 01/27/05
|
|
Posts: 1118
|
|
Loc: pittsburgh PA
|
|
|
maybe some kind of true CAI for us zetec guys
this is a strech...but an aftermarket grille for the mysiques? (top or bottom)
--------------------
kevin m
98 T-red mystique gs
zetec ATX
| my ride |
Post Extras:
|
|
CSVT1214
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 11/01/03
|
|
Posts: 4051
|
|
Loc: Plainville, CT
|
|
|
Originally posted by GTO Pete:
Some kind of high-strength, clear plastic to help protect all the breaking foglights.
+1
 x 1000
--------------------
Tony
1998 SVT Contour (B/MB) #542 3L
1998 SVT Contour (SF/MB) #1266 parts car
2000 SVT Contour (SF/MB) #1533 3L swap to begin!
Post Extras:
|
|
ElKy
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 10/10/01
|
|
Posts: 8445
|
|
Loc: Prince Spaghettiville
|
|
|
how about a $250 bolt on V8, all-wheel drive conversion kit?
--------------------
NY State Trooper: So what makes your car so special to have SVT all over it?
Me: Er...It was made by Fords SPECIAL Vehicle Team?
Post Extras:
|
|
GTO Pete
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 04/07/01
|
|
Posts: 5975
|
|
Loc: Rockville, Maryland
|
|
|
Originally posted by ElKy:
how about a $250 bolt on V8, all-wheel drive conversion kit?
$250 shipped right?
--------------------
Capitol CEG Classifieds
Make an offer!
2005 GTO IBM - 337hp/336tq
Post Extras:
|
|
|
|
Mirko skidplate
--------------------
SOLD Polarg M-28 super bright white bulbs. Replace yellow stock license plate bulbs. See add in classifieds.
WANTED:: EVO style CF hood
Post Extras:
|
|
ElKy
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 10/10/01
|
|
Posts: 8445
|
|
Loc: Prince Spaghettiville
|
|
|
nah..i'd pay shipping!
--------------------
NY State Trooper: So what makes your car so special to have SVT all over it?
Me: Er...It was made by Fords SPECIAL Vehicle Team?
Post Extras:
|
|
Ex-Mean'Tour
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 01/26/05
|
|
Posts: 1593
|
|
Loc: Massachusetts
|
|
|
Originally posted by ElKy:
nah..i'd pay shipping!
Careful when you say that. With some of my recent ebay experiences... They might charge $250 for the engine/ AWD kit but then $3500 for shipping or something.
Not that Pole would do that. He's a straight up kinda guy.
--------------------
MUST SELL - ECM computer new for a 98 V6 mtx + pats
Now trolling in a Red Nissan 4 x 4
Post Extras:
|
|
Frosty
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 11/26/03
|
|
Posts: 1831
|
|
Loc: Sheboygan, WI
|
|
|
A partnership....I am in Marketing you know
--------------------
A Contour is not just a car, it's an experience
99 T-Red SE Zetec ATX
Born April 16, 1999
98 E0 Silver Frost CSVT
#3175/3565
Born August 21st, 1997
Stored at P.R.T. for the winter
67 Mustang 289 project car
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by Frosty:
A partnership....I am in Marketing you know
You're already sponsored...now you want a cut too 
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
GTO Pete
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 04/07/01
|
|
Posts: 5975
|
|
Loc: Rockville, Maryland
|
|
|
Originally posted by Pole120:
Originally posted by Frosty:
A partnership....I am in Marketing you know
You're already sponsored...now you want a cut too
Greedy!!!
How about a free trip to Banned Camp?
--------------------
Capitol CEG Classifieds
Make an offer!
2005 GTO IBM - 337hp/336tq
Post Extras:
|
|
csvtjohnga
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 03/15/05
|
|
Posts: 899
|
|
Loc: Macon, Georgia
|
|
|
-Upgraded rear subframes
Beyond-optimized y-pipe, steps are taken to go beyond the usual optimiation for maximum flow, will be flow tested.
Mirko skidplates
--------------------
98 CSVT t-red
1737#
cf1 Cowl hood
Centerline Storms
CEG Dragon Run- Oct 13-15
WTB- Vortech S/C kit/ADC Turbo Kit
Post Extras:
|
|
todras
|
|
I have no life
|
|
|
|
|
Reged: 05/29/00
|
|
Posts: 21197
|
|
Loc: Grand Rapids, MI
|
|
|
Originally posted by Pole120:
-Powder and ceramic coating at insanly good prices
-Mirko skidplates
And flying monkeys. What can I say. I've always wanted one. If you could do those 3 things that would be fantastic.
--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me
Post Extras:
|
|
Loco4G63
|
|
CEG road warrior
|
|
|
|
|
Reged: 08/01/01
|
|
Posts: 17248
|
|
Loc: IL
|
|
|
Can you do any of this on Evo parts?
--------------------
Hector
2003 Rally Red Mitsubishi Evolution VIII
257HP/259TQ
2005 Lapis Blue Mazda 6s
RET: 00 Cabernet Red Ford Contour Zetec ATX SUPERCHARGED
160HP/141TQ
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?
Show me what you've got and i'll see if I can do anything for you
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
Ray
|
|
Addicted CEG'er
|
|
|
|
|
Reged: 07/10/01
|
|
Posts: 7100
|
|
Loc: San Antonio/Austin, TX
|
|
|
He's got an EVO.. DUH!!!!
--------------------
'99 CSVT - Silver #222/276
In a constant state of blow-off euphoria.
Originally posted by Kremitthefrog:
I like to wear dresses and use binoculars to watch grandmas across the street.
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by Ray:
He's got an EVO.. DUH!!!!
You know what i meant 
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
Loco4G63
|
|
CEG road warrior
|
|
|
|
|
Reged: 08/01/01
|
|
Posts: 17248
|
|
Loc: IL
|
|
|
Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?
Show me what you've got and i'll see if I can do anything for you
I'm sure some poly mounts and a optimized TB would do some good on my car.
--------------------
Hector
2003 Rally Red Mitsubishi Evolution VIII
257HP/259TQ
2005 Lapis Blue Mazda 6s
RET: 00 Cabernet Red Ford Contour Zetec ATX SUPERCHARGED
160HP/141TQ
Post Extras:
|
|
MLuko
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 12/01/03
|
|
Posts: 1899
|
|
Loc: Cottage Grove
|
|
|
Originally posted by EVOLUTION VIII:
Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?
Show me what you've got and i'll see if I can do anything for you
I'm sure some poly mounts and a optimized TB would do some good on my car.
10 inch cat-back with a garbage can for a muffler 
I would like to see stickers!!! AND LOTS OF THEM
--------------------
Mark
1998 T-Red SVT -Needs more Go
1999 Light Prairie Tan, Se Zetec
www.cardomain.com/id/tour4reak
Post Extras:
|
|
JeSiZZle
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 01/14/04
|
|
Posts: 1159
|
|
Loc: Chester , VA (sux)
|
|
|
Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?
Show me what you've got and i'll see if I can do anything for you
you show him yours and hell show you his 
queers 
--------------------
05 Chevy Colorado z71 4x4 *for sale*
97 Honda Accord 4door track whore *12.9 N/A* (blown and wrecked)
97 Honda Accord 4 door
03 Eclipse GS
Post Extras:
|
|
Dr. Cross
|
|
CEG'er
|
|
|
|
|
Reged: 08/20/02
|
|
Posts: 499
|
|
Loc: Burlington, VT
|
|
|
Dash warp repair kit/parts for those of us that had some of the warp "fixed" by a dealer (ie u-clips to hold the dash down).
--------------------
1999 Contour SVT #1966/2760, Silver Frost/Midnight Blue
Koni Kit, Mille Miglia MM-S rims, B&M shifter, Stazi mesh, SFCs, optimized Y-pipe & TB, SS break lines, K&N drop-in, Infinity Kappa speakers, MTX amp/sub
Post Extras:
|
|
Frosty
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 11/26/03
|
|
Posts: 1831
|
|
Loc: Sheboygan, WI
|
|
|
Originally posted by GTO Pete:
Originally posted by Pole120:
Originally posted by Frosty:
A partnership....I am in Marketing you know
You're already sponsored...now you want a cut too
Greedy!!!
How about a free trip to Banned Camp?
I have ALWAYS wanted to go there!! 
--------------------
A Contour is not just a car, it's an experience
99 T-Red SE Zetec ATX
Born April 16, 1999
98 E0 Silver Frost CSVT
#3175/3565
Born August 21st, 1997
Stored at P.R.T. for the winter
67 Mustang 289 project car
Post Extras:
|
|
JeSiZZle
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 01/14/04
|
|
Posts: 1159
|
|
Loc: Chester , VA (sux)
|
|
|
ive been there...
its not all its cracked up to be
--------------------
05 Chevy Colorado z71 4x4 *for sale*
97 Honda Accord 4door track whore *12.9 N/A* (blown and wrecked)
97 Honda Accord 4 door
03 Eclipse GS
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Back on topic......
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
Harrry
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 07/14/04
|
|
Posts: 1651
|
|
Loc: Down by the river!!
|
|
|
I think a true duals mandrel catback.
--------------------
I reject your reality and substitute my own.
Post Extras:
|
|
Pudmunkie
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 09/10/04
|
|
Posts: 1978
|
|
Loc: SEMIEGLOLlerskates
|
|
|
Originally posted by Rickson:
I think a true duals mandrel catback.
As long as its balanced for sound so we dont have the cessna sound!
--------------------
Alex
'99 SVT Contour
-=|WANTED: Vortech, working or not |=-
Post Extras:
|
|
Harrry
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 07/14/04
|
|
Posts: 1651
|
|
Loc: Down by the river!!
|
|
|
Originally posted by Pudmunkie:
Originally posted by Rickson:
I think a true duals mandrel catback.
As long as its balanced for sound so we dont have the cessna sound!
I am still wating for my rolex lol.
A reasonable true dual catback tubing. We can add our own mufflers like truebndz does. That would be really good.
--------------------
I reject your reality and substitute my own.
Post Extras:
|
|
wa2tuff
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 09/13/03
|
|
Posts: 2426
|
|
Loc: Under my car
|
|
|
Originally posted by Pole120:
Suspension:
-Tubular forward and rear arms for the rear suspension
-Spherical endlinks for front and rear swaybars
Performance:
-Fiberglass heatshields
-Mandrel cat-back fabrication
Asthetics:
-Fiberglass paintable tank(p/s,brake,overflow) and battery covers, i may also look into haveing them CF wraped
-Molded jack-point covers into skirts
-Mirko skidplates
Yes, by all means!!
--------------------
WA 2 TUFF SVT
2000 Tropic Green SVT Born 1/28/2000-1975 out of 2150-only 207 made. Some new pics
Post Extras:
|
|
morbid
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 02/10/03
|
|
Posts: 710
|
|
Loc: Phoenix, AZ
|
|
|
If you're able to do carbon fiber.... a CF sunroof panel?
--------------------
morbid
2000 Contour SVT (black)
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
The tubular suspension components will be developed this winter while i build the shop's race SVT, don't expect to see anything production-wise till next summer on those pieces.
LCA Plates and Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.
I cannot do CF. however have several leads on places that can do CF wrapping.
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Keep an eye our soon for:
-Spherical front and rear swaybar endlinks
-Air\oil seperators
-fiberglass heatshields
-filter brackets for the popular RU3530 intake
-intake KITS (filter,adapter,heatshield & bracket)
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
morbid
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 02/10/03
|
|
Posts: 710
|
|
Loc: Phoenix, AZ
|
|
|
sweet! Looks like some good stuff.... I hope you do the front end links first
--------------------
morbid
2000 Contour SVT (black)
Post Extras:
|
|
CSVT1214
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 11/01/03
|
|
Posts: 4051
|
|
Loc: Plainville, CT
|
|
|
Originally posted by Pole120:
-fiberglass heatshields
-filter brackets for the popular RU3530 intake
--------------------
Tony
1998 SVT Contour (B/MB) #542 3L
1998 SVT Contour (SF/MB) #1266 parts car
2000 SVT Contour (SF/MB) #1533 3L swap to begin!
Post Extras:
|
|
buttersSVT
|
|
CEG'er
|
|
|
|
|
Reged: 03/05/06
|
|
Posts: 166
|
|
Loc: good ol' auburn hills
|
|
|
it would be cool to see some front tubular LCA's, not shure if it could be done or if its really pratical....but if i can be done you can do it
--------------------
99' silver smokin' csvt
born on march 18 99' #1491 of 2760
burninrice no more
Post Extras:
|
|
buttersSVT
|
|
CEG'er
|
|
|
|
|
Reged: 03/05/06
|
|
Posts: 166
|
|
Loc: good ol' auburn hills
|
|
|
Originally posted by burninrice:
it would be cool to see some front tubular LCA's, not shure if it could be done or if its really pratical....but if i can be done you can do it
edit noticed it was already mentioned
--------------------
99' silver smokin' csvt
born on march 18 99' #1491 of 2760
burninrice no more
Post Extras:
|
|
xchang
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 12/13/00
|
|
Posts: 1225
|
|
Loc: Bejing, MI
|
|
|
How about my Mirko?
--------------------
"Speak English... I am speaking Engrish..."
Steve Chang
99 Silver SVT Contour #196 (Garaged)
06 Dark Blue Pearl Fusion SE V6 (Daily)
05 Dark Shadow Grey Freestyle Limited AWD
Post Extras:
|
|
Frosty
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 11/26/03
|
|
Posts: 1831
|
|
Loc: Sheboygan, WI
|
|
|
Originally posted by xchang:
How about my Mirko?
Lol..it's back in one piece...kinda
--------------------
A Contour is not just a car, it's an experience
99 T-Red SE Zetec ATX
Born April 16, 1999
98 E0 Silver Frost CSVT
#3175/3565
Born August 21st, 1997
Stored at P.R.T. for the winter
67 Mustang 289 project car
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by Frosty:
Originally posted by xchang:
How about my Mirko?
Lol..it's back in one piece...kinda
I'm a buy guy these days 
Once i get my two core TB's done monday i'll be developing the PCV oil seperator. After taht project is done,tested and interest checked i'll most likely be looking into endlinks as wells as K&N filter brackets.
Frosty....shoot me an e-mail with any new information this thread develops please 
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
99Mystique ATX
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 08/30/03
|
|
Posts: 1356
|
|
Loc: Penfield, NY
|
|
|
I would definitely be interested in the PCV Oil separator... If you need someone to test fitment and whatnot...
--------------------
1999 Mystique LS V6
Alpine CDA-9807, Rear deck sub, Opt. TB, K&N RU-3530/MAF adaptor, custom heatshield, FSVT 17's, SCT 4-program chip, Eibach's/ST200's, Hella Fogs...
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by 99Mystique ATX:
I would definitely be interested in the PCV Oil separator... If you need someone to test fitment and whatnot...
I have two SVT's at my disposal for testing, i'm assembling the required parts this weekend and will install/test next week and let everyone know how it works out.
~Josh
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
|
|
Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.
So how are they coming along?
--------------------
SOLD Polarg M-28 super bright white bulbs. Replace yellow stock license plate bulbs. See add in classifieds.
WANTED:: EVO style CF hood
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by teamSVTour:
Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.
So how are they coming along?
Slowly....i'm verry sorry, but i'm more tah nbacked up right now and i'm trying t oget caught up.
~Josh
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
SVT SNOB
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 07/17/01
|
|
Posts: 2974
|
|
Loc: Burlington, ON
|
|
|
Originally posted by Pole120:
Originally posted by teamSVTour:
Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.
So how are they coming along?
Slowly....i'm verry sorry, but i'm more tah nbacked up right now and i'm trying t oget caught up.
~Josh
Stop slacking and get back to work . Ok just kidding please dont jack up the price on my skidplate  lol.
Aaron
--------------------
AKA NVS SVT
98.5 Silver/Blue SVT#4553
Yeah it's modded
98 T-Red/Blue SVT Contour Totaled 06/05/06
03 3L,VCN 2000,CAT Cams,MSDS Headers w/Y-Pipe,XCal2 and lots more
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
1) testing begins next week on the air\oil seperator
2) filter brackets should come out in a week or two
3) end-links....not sure as of yet, i want to test them myself before i do anyhting farther
4) i'll start drawing up the skid plates next week and hopefully have something to show by the end of Sept.
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
KingpinSVT
|
|
Addicted CEG'er
|
|
|
|
|
Reged: 05/21/03
|
|
Posts: 5600
|
|
Loc: Ocala, FL
|
|
|
I was just digging through some old threads, you should do a harness bar! Something like dion had.
I would rather see that than endlinks, since I can name 2 people who already make nice sets of those
--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT
FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!
Post Extras:
|
|
csvtjohnga
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 03/15/05
|
|
Posts: 899
|
|
Loc: Macon, Georgia
|
|
|
didnt someone a LONG time ago produce or make custom traction bars of somesort? that'd be GREAT!
i agree with Kingpin, a harness bar would kick arse
--------------------
98 CSVT t-red
1737#
cf1 Cowl hood
Centerline Storms
CEG Dragon Run- Oct 13-15
WTB- Vortech S/C kit/ADC Turbo Kit
Post Extras:
|
|
Pole120
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 03/16/04
|
|
Posts: 4141
|
|
Loc: New Berlin, WI
|
|
|
Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar!
I started mocking one up almost a year ago, but never finished it.....i may have to re-visit the idea.
~Josh
--------------------
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
Post Extras:
|
|
BrApple
|
|
Hard-core CEG'er
|
|
|
|
|
Reged: 12/23/01
|
|
Posts: 6910
|
|
Loc: Enfield, CT
|
|
|
Originally posted by Pole120:
4) i'll start drawing up the skid plates next week and hopefully have something to show by the end of Sept.
sweet, car gets painted in october ... hopefully sooner and this will be a good thing to have
--------------------
- 95 Mystique LS - Zetec/5spd
- 99 Contour SeVT Sport - Duratec/5spd
Official NE-CEG Contour/Mustang Family
Post Extras:
|
|
|
|
yea my Mirko is waiting to get painted...I'd love to have the skid plates done as early as possible so I can run the Mirko atleast a little before it starts snowing
--------------------
SOLD Polarg M-28 super bright white bulbs. Replace yellow stock license plate bulbs. See add in classifieds.
WANTED:: EVO style CF hood
Post Extras:
|
|
111R
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 06/11/05
|
|
Posts: 533
|
|
Loc: Los Angeles
|
|
|
Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar! Something like dion had.
I would rather see that than endlinks, since I can name 2 people who already make nice sets of those
X 1,000,000,000
i believe dion had a improvised wrx bar
--------------------
koni kit - hpp rstb
camber/plates - cf (yikes!)
polyroll resistors - TCA's
WR headers/ypipe -TB hiflow cat
SFC's - XCal2
-dreaming of 3L-
Post Extras:
|
|
morbid
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 02/10/03
|
|
Posts: 710
|
|
Loc: Phoenix, AZ
|
|
|
Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar! Something like dion had.
I would rather see that than endlinks, since I can name 2 people who already make nice sets of those
Who's already making spherical rod front endlinks?
--------------------
morbid
2000 Contour SVT (black)
Post Extras:
|
|
KingpinSVT
|
|
Addicted CEG'er
|
|
|
|
|
Reged: 05/21/03
|
|
Posts: 5600
|
|
Loc: Ocala, FL
|
|
|
Stazi and Bradness
Edit: I dont know if Stazi's are spherical, but I believe they are at least beefier than stock.
--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT
FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!
Edited by KingpinSVT (09/01/06 03:07 PM)
Post Extras:
|
|
Kremithefrog
|
|
I have no life
|
|
|
|
|
Reged: 05/14/02
|
|
Posts: 21653
|
|
Loc: Albany, Georgia
|
|
|
Stazi makes spherical rear. I didn't know anyone makes front end links. But the new ones from ford are better than what came stock on the cars.
--------------------
98.5 SVT
91 Escort GT (almost sold)
96 ATX Zetec (i brake to watch you swerve)
FS: SVT rear sway bar
WTB: Very cheap beater
CEG Dragon Run - October 13-15
Post Extras:
|
|
KingpinSVT
|
|
Addicted CEG'er
|
|
|
|
|
Reged: 05/21/03
|
|
Posts: 5600
|
|
Loc: Ocala, FL
|
|
|
Oops! I didnt notice he said front too! AFAIK, no one makes the fronts.
Both Bradness and Stazi make rear endlinks, just to set the record straight.
--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT
FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!
Post Extras:
|
|
striker2
|
|
Veteran CEG'er
|
|
|
|
|
Reged: 03/15/04
|
|
Posts: 536
|
|
Loc: Glendale Heights, Il (for now)
|
|
|
how about some adjustable frt and rear sway bars and endlinks
--------------------
97 contour gl mtx
front & rear upper strut tower braces
19mm bat sway bar
Koni struts w/GC knockoffs
Post Extras:
|
Previous
Index
Next
Flat
Threaded
Edit
Reply
Quote