Contour Enthusiasts Group CEG

General >> Dyno and Drag

Pages: 1 | 2 | 3 | 4 | 5 | (show all)
Tourige
Hard-core CEG'er

Reged: 05/25/04
Posts: 3637
Loc: Calgary, Alberta, Canada
Re: 100mph trap speed - easy with juice? new
#1307590 (Re: TRicker) 08/28/06 06:43 AM

Originally posted by TRicker:
yep. everything i say is absolute crap. although i have a hand held GPS that tells me whats crap and whats not. either way, people that talk like this on this forum make less power and would have there ass in there hand if they tried to race me. hats off to the guys that give advice or whatever, kiss off if your a know it all smack talker. i gave the guy what my car does. you havent even seen it, you wouldnt know. CSVT#49 rode in my car with nitrous, ask him if its fast.




This is what happens when money exceeds knowledge.

--------------------
99 TRed Contour SVT # 1853 out of 2760
230.2 WHP @ 6500
237.0 WTR @ 2250

Originally posted by MxRacer:
Originally posted by RawBurt:
I'll be keeping it to myself, until the time comes. It'll be hard to find.




much like your weiner.




Post Extras: Print Post Remind Me! Notify Moderator
Harrry
Hard-core CEG'er

Reged: 07/14/04
Posts: 1651
Loc: Down by the river!!
Re: 100mph trap speed - easy with juice? new
#1307597 (Re: TRicker) 08/28/06 08:17 AM

Originally posted by TRicker:
yep. everything i say is absolute crap.





I couldn't agree with you more.





--------------------
I reject your reality and substitute my own.



Edited by Harrry (08/28/06 08:19 AM)

Post Extras: Print Post Remind Me! Notify Moderator
SleeperZ
Hard-core CEG'er

Reged: 04/16/02
Posts: 2483
Loc: near Tacoma, WA
Re: 100mph trap speed - easy with juice? new
#1307786 (Re: Tourige) 08/28/06 03:46 PM

Zetec + 75HP shot + CAI + cat-back exaust + crank UDP + cam gears (not tuned) + superchip = 14.4s @ 97mph [pre Quaife and lightened flywheel & on stock 15" rims with Kumho ECSTA 711 tires].

--------------------
Frank McCoy aka Mod-deth aka Mid Life Crisis aka SVT Doood aka mcgainer is a SCAM ARTIST

Pre98 Zetec - Some Mods

Post Extras: Print Post Remind Me! Notify Moderator
99cougar
Veteran CEG'er

Reged: 10/25/03
Posts: 718
Loc: south carolina
Re: 100mph trap speed - easy with juice? new
#1307874 (Re: MapOfTaziFoSho) 08/28/06 05:38 PM

Originally posted by MapOfTaziFoSho:
Tricker 95 mph just isnt happening in 3rd gear with the stock final drive ratio. I'm glad you have GPS, but um ya...not possible.





I'm not defending him in any way...but if you have an 8,000+ rev limiter you can do 95. Not that it would help you in any type of race cause even SVT cams do you no good way up there, but it is possible


I feel bad for his rod bearings.

--------------------
1999 Cougar V6 MTX
SVT UIM/LIM/65mm TB, I/H/E, Fidanza/SPEC III/Torsen, Koni/GC's, 19" Icon wheels w/ Pirelli rubber, NX Wet Kit



Post Extras: Print Post Remind Me! Notify Moderator
MapOfTaziFoSho
Hard-core CEG'er

Reged: 09/01/02
Posts: 9065
Loc: The E.L.
Re: 100mph trap speed - easy with juice? new
#1307920 (Re: 99cougar) 08/28/06 06:39 PM

Originally posted by 99cougar:
Originally posted by MapOfTaziFoSho:
Tricker 95 mph just isnt happening in 3rd gear with the stock final drive ratio. I'm glad you have GPS, but um ya...not possible.





I'm not defending him in any way...but if you have an 8,000+ rev limiter you can do 95. Not that it would help you in any type of race cause even SVT cams do you no good way up there, but it is possible


I feel bad for his rod bearings.




Well, if he goes to 8 grand...my god

--------------------
Born again on 04/09/06
FOR SALE:
Moonroof glass and motor MB sunshade
PM ME!


Post Extras: Print Post Remind Me! Notify Moderator
99 red SVT
CEG'er

Reged: 12/06/02
Posts: 317
Loc: Harrisburg, PA
Re: 100mph trap speed - easy with juice? new
#1307923 (Re: 99cougar) 08/28/06 06:43 PM

Originally posted by 99cougar:
Originally posted by MapOfTaziFoSho:
Tricker 95 mph just isnt happening in 3rd gear with the stock final drive ratio. I'm glad you have GPS, but um ya...not possible.





I'm not defending him in any way...but if you have an 8,000+ rev limiter you can do 95. Not that it would help you in any type of race cause even SVT cams do you no good way up there, but it is possible


I feel bad for his rod bearings.




I'm glad someone else said this, because I did some quick math and that's what I came up with, too...

--------------------
Originally posted by LUCA:
Yep.
You can be Phil too if you'd like.




Post Extras: Print Post Remind Me! Notify Moderator
MapOfTaziFoSho
Hard-core CEG'er

Reged: 09/01/02
Posts: 9065
Loc: The E.L.
Re: 100mph trap speed - easy with juice? new
#1307931 (Re: 99 red SVT) 08/28/06 06:51 PM

Originally posted by 99 red SVT:
Originally posted by 99cougar:
Originally posted by MapOfTaziFoSho:
Tricker 95 mph just isnt happening in 3rd gear with the stock final drive ratio. I'm glad you have GPS, but um ya...not possible.





I'm not defending him in any way...but if you have an 8,000+ rev limiter you can do 95. Not that it would help you in any type of race cause even SVT cams do you no good way up there, but it is possible


I feel bad for his rod bearings.




I'm glad someone else said this, because I did some quick math and that's what I came up with, too...




Do you understand what would happen to this motor if taken past 8k rpm on stock rods!?

--------------------
Born again on 04/09/06
FOR SALE:
Moonroof glass and motor MB sunshade
PM ME!


Post Extras: Print Post Remind Me! Notify Moderator
99cougar
Veteran CEG'er

Reged: 10/25/03
Posts: 718
Loc: south carolina
Re: 100mph trap speed - easy with juice? new
#1307987 (Re: MapOfTaziFoSho) 08/28/06 08:05 PM

Originally posted by MapOfTaziFoSho:


Do you understand what would happen to this motor if taken past 8k rpm on stock rods!?




Nothing if you didn't do it ever time you start the car.

I have taken my car to 8K once when i first got the PRP, and i was just messing around. DemonSVT has taken his car to 8K+.

Once again i am not saying it does the engine good to do this, but it does not mean it will break just because you do it once or twice.

--------------------
1999 Cougar V6 MTX
SVT UIM/LIM/65mm TB, I/H/E, Fidanza/SPEC III/Torsen, Koni/GC's, 19" Icon wheels w/ Pirelli rubber, NX Wet Kit



Post Extras: Print Post Remind Me! Notify Moderator
TRicker
CEG'er

Reged: 06/25/06
Posts: 227
Loc: Center City, MN
Re: 100mph trap speed - easy with juice? new
#1308013 (Re: 99cougar) 08/28/06 08:43 PM

mine hit 8000 once in first gear spinning in the rain.

and yeah guys my point was i get out of third in the 1/4 and im going 93-95 MPH when i get into 4th. im glad you guys laugh about me, cuz you know it ALL! i know nothing, it must be fun to make fun of me! lol. make some power and call me when you get it all figured out, lol. and yeah my rods and bearings are doing great so far. change the oil often, put 6 full quarts into it, run good oil, an dont wind out on right hand turns, and there isnt a problem. you guys realize that it takes a period of time to pump enough oil into the valvecover to make a difference in the oil pan to make the main bearings starve for oil? you would have to go in circles on the rev limiter in first gear for a good few minutes in order for this to happen. or maybe be on an autocross course where you turn every which way rapidly. one freeway on/off ramp isnt gonna do it. not changing your oil, or bumping the rev limiter everywhere you go, or FREEREVVING it will do these things. yea and like i said, make some power, then talk some smack. where's the 300+ slips? (thats still lame power imo)

--------------------
1998 CSVT
NX stage 1 ford EFI kit
MSD dis-4
B&M short throw
K&N short ram intake
Fsvt Euro 17's
Trubendz 2.5" exhaust
Spec stage 3

249.9 HP 258.2 TRQ clutch slipping the whole time

Post Extras: Print Post Remind Me! Notify Moderator
KingpinSVT
Addicted CEG'er

Reged: 05/21/03
Posts: 5600
Loc: Ocala, FL
Re: 100mph trap speed - easy with juice? new
#1308042 (Re: TRicker) 08/28/06 09:07 PM

Originally posted by TRicker:


-you guys realize that it takes a period of time to pump enough oil into the valvecover to make a difference in the oil pan to make the main bearings starve for oil?

you would have to go in circles on the rev limiter in first gear for a good few minutes in order for this to happen.

-yea and like i said, make some power, then talk some smack. where's the 300+ slips? (thats still lame power imo)




You realize thats totally incorrect, right? It doesnt take a long time at all, most definitely not minutes. Freeway on ramps could in fact do it, because there are more factors in play than oil volume, like baffling (or lack of).

And its been proven in fact that the oil pan is seriously low on oil at high RPMs. And that was sitting still!

But what do I know, Im not making 300whp!

--------------------
#4559 of 6535 born on Feb 17, 1998
Black 1998.5 CSVT

FOR SALE [cleaning house]: SVT rear swaybar. Reasonable offer and its yours!

Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | 5 | (show all)


Extra information
0 registered and 10 anonymous users are browsing this forum.

Moderator:  mbb41 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 7664

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.018 seconds in which 0.011 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company