Contour Enthusiasts Group CEG

Modifications >> 3.0L Duratec

Pages: 1 | 2 | 3 | 4 | 5 | (show all)
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Pics of Taurus pan vs. new Escape pan
#611673 - 05/10/04 11:16 PM

Taurus left and Escape right. Obviously.



Escape pan isn't as deep. Comes with gasket and bolts.


--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
Derk-xB
Hard-core CEG'er

Reged: 08/14/00
Posts: 4713
Loc: The Dalles, OR
Re: Pics of Taurus pan vs. new Escape pan new
#611894 (Re: todras) 05/11/04 02:59 AM

Since the pan isn't as deep, can you still use the same dipstick?



--------------------
Derek
Scion xB 5-spd
Previous: 2000 Silver Frost SVT
Please share the road with cyclists.

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#611974 (Re: Derk-xB) 05/11/04 04:03 AM

Originally posted by Derk2000:
Since the pan isn't as deep, can you still use the same dipstick?




He is comparing it to the Taurus pan which does not fit the CDW-27 platform.
The Taurus pan is a completely different design built to fit.... A Taurus.


The Escape uses the exact same pan design that any CDW-27 does. It just has been revised several times since "our" line dead.

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
Derk-xB
Hard-core CEG'er

Reged: 08/14/00
Posts: 4713
Loc: The Dalles, OR
Re: Pics of Taurus pan vs. new Escape pan new
#611981 (Re: DemonSVT) 05/11/04 04:07 AM

Originally posted by DemonSVT:
Originally posted by Derk2000:
Since the pan isn't as deep, can you still use the same dipstick?




He is comparing it to the Taurus pan which does not fit the CDW-27 platform.
The Taurus pan is a completely different design built to fit.... A Taurus.


The Escape uses the exact same pan design that any CDW-27 does. It just has been revised several times since "our" line dead.




So you're saying the dipstick fits?

This seems like a better protective bolt on than the DMD... Hmmmm.....

--------------------
Derek
Scion xB 5-spd
Previous: 2000 Silver Frost SVT
Please share the road with cyclists.

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#611987 (Re: Derk-xB) 05/11/04 04:10 AM

Originally posted by Derk2000:
This seems like a better protective bolt on than the DMD... Hmmmm.....



Light years better.

Running 6 qts of oil is better.

Checking your oil often is better.


Shall we throw in full 3 liter even...

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
Livinsvt
Hard-core CEG'er

Reged: 10/28/01
Posts: 1859
Loc: michigan
Re: Pics of Taurus pan vs. new Escape pan new
#612064 (Re: DemonSVT) 05/11/04 05:39 AM

Does anyone have pictures of a modded one to fit a manual trans?

--------------------
'99 Silver svt
For sale
19" Axis Neo wheels
3.0 parts, pre-98 trunk,
Check classifieds

bp.powell@comcast.net



Post Extras: Print Post Remind Me! Notify Moderator
vudusvt
CEG'er

Reged: 08/22/02
Posts: 411
Loc: SoCal - Go Lakers!
Re: Pics of Taurus pan vs. new Escape pan new
#612084 (Re: Livinsvt) 05/11/04 06:31 AM

Originally posted by livinsvt:
Does anyone have pictures of a modded one to fit a manual trans?




No mods are necessary to make it fit. I kept the stock dipstick and just noted where 6 qts is...

People have said that you should upgrade the windage tray too, although the new pan does work with the stocker.

--------------------
-Chuck Dienzo

Black 98.5 E1 SVT
#5022 of 6535
Born on March 16, 1998

"If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason."

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#612146 (Re: DemonSVT) 05/11/04 12:12 PM

Originally posted by DemonSVT:

He is comparing it to the Taurus pan which does not fit the CDW-27 platform.





That's news to me. I've seen it installed on 3L Tours.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
Livinsvt
Hard-core CEG'er

Reged: 10/28/01
Posts: 1859
Loc: michigan
Re: Pics of Taurus pan vs. new Escape pan new
#612232 (Re: vudusvt) 05/11/04 02:16 PM

Originally posted by vudusvt:
Originally posted by livinsvt:
Does anyone have pictures of a modded one to fit a manual trans?




No mods are necessary to make it fit. I kept the stock dipstick and just noted where 6 qts is...

People have said that you should upgrade the windage tray too, although the new pan does work with the stocker.





Realy? Two people that have done 3.0 conversions told me that it has to be slightly modified, weld in a hole and make another? Am I confusing with something else?

--------------------
'99 Silver svt
For sale
19" Axis Neo wheels
3.0 parts, pre-98 trunk,
Check classifieds

bp.powell@comcast.net



Post Extras: Print Post Remind Me! Notify Moderator
vudusvt
CEG'er

Reged: 08/22/02
Posts: 411
Loc: SoCal - Go Lakers!
Re: Pics of Taurus pan vs. new Escape pan new
#612437 (Re: Livinsvt) 05/11/04 06:27 PM

We're talking Escape pan, right? If so, yup. It bolted up to my 2.5 w/stock windage tray just fine- of course, when I saw the windage tray was updated, I changed it out, too (also a straight bolt-in). On the 3L, there should be no difference- especially if you do the windage tray, too.

I *think* I remember the posts you're referring to. IIRC, that was the YZxxxxxx oil pan. The one I have (and pictured above) is a more recent update (note the built-in gasket)- maybe one of the revisions was to make sure it fit all duratecs w/out modification.

Does anyone have a pic of the YZ oil pan for comparo?

Of course I could be just talking out of my arse as I am often wrong on these things....

--------------------
-Chuck Dienzo

Black 98.5 E1 SVT
#5022 of 6535
Born on March 16, 1998

"If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason."

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#612570 (Re: vudusvt) 05/11/04 08:23 PM

Originally posted by vudusvt:


Does anyone have a pic of the YZ oil pan for comparo?






You mean like the one in the pic? That is the YZ pan.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
vudusvt
CEG'er

Reged: 08/22/02
Posts: 411
Loc: SoCal - Go Lakers!
Re: Pics of Taurus pan vs. new Escape pan new
#612629 (Re: todras) 05/11/04 09:21 PM

Hmmm. Mine looks just like that and its PN is 3M4Z6675BA.
Got it from Bill, too. He assured me that it was the latest revision after I asked about the YZxxxxx version.

--------------------
-Chuck Dienzo

Black 98.5 E1 SVT
#5022 of 6535
Born on March 16, 1998

"If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason."

Post Extras: Print Post Remind Me! Notify Moderator
GTO Pete
Hard-core CEG'er

Reged: 04/07/01
Posts: 5975
Loc: Rockville, Maryland
Re: Pics of Taurus pan vs. new Escape pan new
#612636 (Re: vudusvt) 05/11/04 09:24 PM

Do you need a new dipstick and sleeve with this pan?

I'm confused because another thread the guy below said you do.

Originally posted by contoursvt11:
what they don't tell you is that you have to buy a new dip stick and sleeve with the new oil pan. I just order them together from Bill. I think it was around 130 total.




And in this thread, the guy says you don't.
Originally posted by vudusvt:
No mods are necessary to make it fit. I kept the stock dipstick and just noted where 6 qts is...




Which is it??

--------------------
Capitol CEG Classifieds
Make an offer!

2005 GTO IBM - 337hp/336tq

Edited by SVT ST PETE (05/11/04 10:12 PM)

Post Extras: Print Post Remind Me! Notify Moderator
PA 3L SVTModerator
Hard-core CEG'er

Reged: 06/25/01
Posts: 1541
Loc: Conshohocken, PA
Re: Pics of Taurus pan vs. new Escape pan new
#612647 (Re: GTO Pete) 05/11/04 09:32 PM

Originally posted by SVT ST PETE:
Do you need a new dipstick and sleeve with this pan?

I'm confused because another thread said you did.




Good, I'm glad I'm not the only one. Here's the old thread and the post in question. (Obviously Pete and I are right on top of this question.)

Post Extras: Print Post Remind Me! Notify Moderator
BStoneMega
Hard-core CEG'er

Reged: 09/15/02
Posts: 1196
Loc: Elgin, IL
Re: Pics of Taurus pan vs. new Escape pan new
#612690 (Re: PA 3L SVT) 05/11/04 10:46 PM

I must have got ripped off, I'm looking at my reciept for the 5L8Z*6675*AA 03 Escape 3L oil pan $161.70 at the Ford Dealer. Are prices the same everywhere?

--------------------
2004 Evolution VIII cams-exhaust-tune
315whp 12.7@109


Post Extras: Print Post Remind Me! Notify Moderator
ScottK
Hard-core CEG'er

Reged: 03/26/02
Posts: 1325
Loc: San Diego
Re: Pics of Taurus pan vs. new Escape pan new
#612700 (Re: BStoneMega) 05/11/04 11:06 PM

Originally posted by BStoneMega:
I must have got ripped off, I'm looking at my reciept for the 5L8Z*6675*AA 03 Escape 3L oil pan $161.70 at the Ford Dealer. Are prices the same everywhere?




You mean you don't know to order everything from Bill Jenkins yet? (20% or 25% below retail)

--------------------
97 Contour SE MTX
K&N 3530, UR UDP, 19# Injectors, mystery mod, FMS wires, Fordchip.com chip, SVT: TB, Flywheel, clutch, exhaust

04 Grand Caravan SXT

Post Extras: Print Post Remind Me! Notify Moderator
BStoneMega
Hard-core CEG'er

Reged: 09/15/02
Posts: 1196
Loc: Elgin, IL
Re: Pics of Taurus pan vs. new Escape pan new
#612712 (Re: ScottK) 05/11/04 11:32 PM

Originally posted by ScottK:
Originally posted by BStoneMega:
I must have got ripped off, I'm looking at my reciept for the 5L8Z*6675*AA 03 Escape 3L oil pan $161.70 at the Ford Dealer. Are prices the same everywhere?




You mean you don't know to order everything from Bill Jenkins yet? (20% or 25% below retail)




I have no patience to wait on the UPS. You don't have to pay shipping when you go to the Ford dealer too. But 25% is 25%. One day I'll wise up.

--------------------
2004 Evolution VIII cams-exhaust-tune
315whp 12.7@109


Post Extras: Print Post Remind Me! Notify Moderator
Livinsvt
Hard-core CEG'er

Reged: 10/28/01
Posts: 1859
Loc: michigan
Re: Pics of Taurus pan vs. new Escape pan new
#612713 (Re: ScottK) 05/11/04 11:33 PM

I have been realy confused on this for a while. So there is three pans? 5l8z,3m4z,yz.. Which one is for a 2001+ 3.0. I was told that on a 3.0 using manual trans that very minor modifications were needed. Can anyone straighten this out?




--------------------
'99 Silver svt
For sale
19" Axis Neo wheels
3.0 parts, pre-98 trunk,
Check classifieds

bp.powell@comcast.net



Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#612856 (Re: Livinsvt) 05/12/04 02:05 AM

Okay okay. My pan # is 5L8E-6675-BB. The pick up is the YL8Z. Bill said the correct baffle is included.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#612857 (Re: BStoneMega) 05/12/04 02:07 AM

Originally posted by BStoneMega:
I must have got ripped off, I'm looking at my reciept for the 5L8Z*6675*AA 03 Escape 3L oil pan $161.70 at the Ford Dealer. Are prices the same everywhere?




Wow it's like $110 from Bill.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#613028 (Re: vudusvt) 05/12/04 04:13 AM

Originally posted by vudusvt:
Hmmm. Mine looks just like that and its PN is 3M4Z6675BA.
Got it from Bill, too. He assured me that it was the latest revision after I asked about the YZxxxxx version.



Not true.

3M4Z does not have the integral gasket.

The 5L8E has the integral gasket.


The 3M4Z kit is $75.
The 5L8E kit is over $100.


The only difference is the gasket.



NEITHER kit comes with the YL8Z pickup or windage tray!!!

Those must be purchased separately if needed.

All 01+ engines already have the YL8Z windage tray.
All 01+ Escape engines have the YL8Z pickup as well.



DAMN folks this is all OLD & very REHASHED information.

It's even posted on my website too...

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
PA 3L SVTModerator
Hard-core CEG'er

Reged: 06/25/01
Posts: 1541
Loc: Conshohocken, PA
Re: Pics of Taurus pan vs. new Escape pan new
#613062 (Re: DemonSVT) 05/12/04 04:39 AM

Originally posted by DemonSVT:
3M4Z does not have the integral gasket.

The 5L8E has the integral gasket.


The 3M4Z kit is $75.
The 5L8E kit is over $100.


The only difference is the gasket.



NEITHER kit comes with the YL8Z pickup or windage tray!!!

Those must be purchased separately if needed.

All 01+ engines already have the YL8Z windage tray.
All 01+ Escape engines have the YL8Z pickup as well.





Well there you go, mostly. That clears up a few things for me. Also explains why my pickup tube (98) had to be modded to fit my block (01) when the motor went in.

But, Pete and I still wonder about the dipstick and the dipstick tube. Same all across (my 98 works with the 01 windage and the 98 pan), or changed along the way and required with the new pan?

Originally posted by DemonSVT:

DAMN folks this is all OLD & very REHASHED information.

It's even posted on my website too...




Yes, we all bow to your ultimate knowledge on the subject, unfortunately there is/was still a bit of confusion over this. Thanks for participating!

Post Extras: Print Post Remind Me! Notify Moderator
Livinsvt
Hard-core CEG'er

Reged: 10/28/01
Posts: 1859
Loc: michigan
Re: Pics of Taurus pan vs. new Escape pan new
#613075 (Re: PA 3L SVT) 05/12/04 04:46 AM

Maybe there should be a sticky added, just for the oil pan and pickup clarifying

--------------------
'99 Silver svt
For sale
19" Axis Neo wheels
3.0 parts, pre-98 trunk,
Check classifieds

bp.powell@comcast.net



Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#613077 (Re: PA 3L SVT) 05/12/04 04:48 AM

The dipstick & tube for any regular Duratec engine is interchangeable.

It was revised once in 01 (or around there)

Now 6qts shows "full" on the dipstick.


I am using the revised dipstick from the 5/02 Taurus/Sable Engine I am running and using it with the 3M4Z pan and YL8Z pickup & windage tray.

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
Swazo
Hard-core CEG'er

Reged: 08/20/02
Posts: 4970
Loc: Land of the watered-down expletives... you fetching fetchers!
Re: Pics of Taurus pan vs. new Escape pan new
#613421 (Re: DemonSVT) 05/12/04 04:39 PM

Didn't you have to use the +'01 Escape style main bolts to use the YL8Z windage tray?

--------------------
2005 Ford F150 SuperCab FX4
1964 Chevrolet Impala SS
1998 CSVT: 354HP/328TQ @ 10 psi, now gone

Post Extras: Print Post Remind Me! Notify Moderator
ssmumich00
Hard-core CEG'er

Reged: 12/11/01
Posts: 2676
Loc: Hurricane Valley
Re: Pics of Taurus pan vs. new Escape pan new
#613545 (Re: Swazo) 05/12/04 07:07 PM

Yup, you have to use the 3L mains to work with the revised pickup tube and windage tray. . .

This info was confusing as hell to me, but Demon has been kind of enough to clairfy it for me a gazillion times,

To repeat:
New Escape Oil Pan +
New Pickup +
New tray +
New Main Studs +
New Dipstick and Sleeve.

That's all that needs to be done.

Now you can just do the new oil pan if you don't want to mess with the mains, but if you're getting your engine done, migh as well, right. . . .the part numbers are ALL listed above or in other posts. . .

--------------------
New Ride

Post Extras: Print Post Remind Me! Notify Moderator
vudusvt
CEG'er

Reged: 08/22/02
Posts: 411
Loc: SoCal - Go Lakers!
Re: Pics of Taurus pan vs. new Escape pan new
#613589 (Re: ssmumich00) 05/12/04 08:05 PM

OK, just compared my unoffical email reply "invoice" with the actual shipping invoice (from Bill).

In Bills email reply, he listed the 3M4Z number.

In the actual shipping invoice, it's the 58LE number

Cost was $117 shipped

It does have the integral gasket.

Sorry for the confusion.

--------------------
-Chuck Dienzo

Black 98.5 E1 SVT
#5022 of 6535
Born on March 16, 1998

"If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason."

Post Extras: Print Post Remind Me! Notify Moderator
svttour
Hard-core CEG'er

Reged: 08/13/01
Posts: 1089
Loc: land of the heat!!~both the team and the temp.
Re: Pics of Taurus pan vs. new Escape pan new
#613639 (Re: vudusvt) 05/12/04 09:10 PM

The pan assembly i got was the 3M4Z-6675-BA but im using pick up tube F8RZ-9H308-AA which is the cdw-27 pick up tube and i cut the bracket off.

--------------------
99 T-RED 3L SVT
Apillar Guages How-To

3L 98 CSVT SF/MB 4 SALE 7500 obo pm me

Post Extras: Print Post Remind Me! Notify Moderator
Livinsvt
Hard-core CEG'er

Reged: 10/28/01
Posts: 1859
Loc: michigan
Re: Pics of Taurus pan vs. new Escape pan new
#613676 (Re: ssmumich00) 05/12/04 09:50 PM

Originally posted by ssmumich00:
Yup, you have to use the 3L mains to work with the revised pickup tube and windage tray. . .

This info was confusing as hell to me, but Demon has been kind of enough to clairfy it for me a gazillion times,

To repeat:
New Escape Oil Pan +
New Pickup +
New tray +
New Main Studs +
New Dipstick and Sleeve.

That's all that needs to be done.

Now you can just do the new oil pan if you don't want to mess with the mains, but if you're getting your engine done, migh as well, right. . . .the part numbers are ALL listed above or in other posts. . .




This is all if your using a 2.5l and want to upgrade pans right? Not if you already have a 3.0,espcealy a 2001+, than you only need the pan and dipstick, correct? This is the 3.0l forum so some may get confuse..umm like me .

--------------------
'99 Silver svt
For sale
19" Axis Neo wheels
3.0 parts, pre-98 trunk,
Check classifieds

bp.powell@comcast.net



Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#614479 (Re: Swazo) 05/13/04 07:47 PM

Originally posted by Swazo:
Didn't you have to use the +'01 Escape style main bolts to use the YL8Z windage tray?



Yes you sort of get those for free with a 5/02 casting date engine.

To answer the question "straightly" (where have you folks been the last several years??? )

Yes you need the 01+ main studs to mount the YL8Z pickup & windage tray.


You can use any dipstick because they all have the same protruding length and base mounting point. Only the marks "on" the dipstick changed when comparing my 00 SVT to the 5/02 3L

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#614483 (Re: svttour) 05/13/04 07:51 PM

Originally posted by svttour:
The pan assembly i got was the 3M4Z-6675-BA but im using pick up tube F8RZ-9H308-AA which is the cdw-27 pick up tube and i cut the bracket off.



Cutting off the support bracket is defiintely NOT the way to do it.

Neither is BENDING the bracket.


Foks DO NOT be cheap asses and do it the dangerous way (the support is there for a REASON) and just spend the $15 and get the new pickup.

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#614508 (Re: DemonSVT) 05/13/04 08:19 PM

The reason the support is on there is that during testing the pick up stressed. This allowed air to be picked up along with the oil. I cut mine off and Terry had a fit when I told him that. It was only temporary but still don't do it. Just do it right the first time.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
svt4b
Veteran CEG'er

Reged: 05/16/03
Posts: 604
Loc: !>CALI<!
Re: Pics of Taurus pan vs. new Escape pan new
#614710 (Re: todras) 05/14/04 12:33 AM

how much difference do the windage tray and baffled pan really make, besides engine insurance?? and im a little confused on the cdw27, which one is the taurus 3L? and does the baffled pan from BAT only fit the 2.5 stocker?

--------------------
E0 silver #185
*3L hybrid+lots of mods
DYNO(moderate tune): 205 whp/ 190ftlb
http://www.cardomain.com/memberpage/449801


Post Extras: Print Post Remind Me! Notify Moderator
procyon
CEG'er

Reged: 01/05/02
Posts: 344
Re: Pics of Taurus pan vs. new Escape pan new
#614793 (Re: svt4b) 05/14/04 01:56 AM

ok, time to clear this up again....

There is no "2.5L pan", "3.0L pan", or "Escape pan".

There are the following 3 pan setups:
1) Unique pan for 3.0L Taurus only due to packaging differences.
2) Unique pans for Jaguars & Lincoln LS. Completely different so don't even ask if they'll fit.
3) Oil pan shared by everything else including Contour, Mystique, Cougar, Mondeo, Escape, Mazda6, and Mazda MPV. So some of these are 2.5L and some are 3.0L. Got it?

The Taurus pan will have part number on it that starts with F5DE or F7DE. That's all you need to know. It's not worth the trouble of trying to mod it to work. Use your original or buy an improved pan.

The shared pan goes like this.
F53E, F73E, YL8E pans. Would work on newer engines but do not have improvements. No major functional differences.

2S7E pan. Added ribs to front of pan.

3M4E pan (3M4Z-6675-BA service number) Same as 2S7E but has improved baffle inside the pan for better drainback of oil to pickup.

5L8E pan (5L8Z-6675-AA service number). Same as 3M4E but has oil pan gasket integrated into the pan rail.

All of the improved pans above would fit on older Contours, Cougars, etc. The oil pan is independant of the pickup screen & windage tray. You don't have to run a old/new level pickup & windage tray with a old/new level pan because the location of the pickup in the pan has not changed.

However, to run the newer windage tray, you need to use the newer pickup with the newer bolts/studs. This is because the newer tray has different mounting points for the pickup. Don't try and just use your old studs and move them around to a different location. The newer studs have a different head thickness so you would change the clearance of the pickup to the bottom of the pan. So to summarize, don't mix old pickup, tray, and bolts with new. Go all old or all new.




Post Extras: Print Post Remind Me! Notify Moderator
bmxcontour
CEG'er

Reged: 08/16/02
Posts: 451
Loc: Toledo, OH originally now in Seoul, Korea
Re: Pics of Taurus pan vs. new Escape pan new
#639119 (Re: procyon) 06/13/04 01:17 PM

i have a 2005 Escpae pan on my 2.5L, and the dipstick tube and dipstick need to be changed to the newer ones. other than that it is a direct bolt on....the pick up is the same. i only upgraded b/c i hit a rock and it ripped off the back of my 2.5 pan.

Ben

--------------------
95 SE ATX
Electric red
mucho mods

2005 Scion xB
Black Sand Pearl
tinted windows
red leather steering wheel

US Army Mechanic

Post Extras: Print Post Remind Me! Notify Moderator
Horse
Hard-core CEG'er

Reged: 06/12/01
Posts: 4777
Loc: Cobra Heaven
Re: Pics of Taurus pan vs. new Escape pan new
#797855 (Re: procyon) 12/20/04 04:29 AM

Originally posted by procyon:
ok, time to clear this up again....

There is no "2.5L pan", "3.0L pan", or "Escape pan".

There are the following 3 pan setups:
1) Unique pan for 3.0L Taurus only due to packaging differences.
2) Unique pans for Jaguars & Lincoln LS. Completely different so don't even ask if they'll fit.
3) Oil pan shared by everything else including Contour, Mystique, Cougar, Mondeo, Escape, Mazda6, and Mazda MPV. So some of these are 2.5L and some are 3.0L. Got it?

The Taurus pan will have part number on it that starts with F5DE or F7DE. That's all you need to know. It's not worth the trouble of trying to mod it to work. Use your original or buy an improved pan.

The shared pan goes like this.
F53E, F73E, YL8E pans. Would work on newer engines but do not have improvements. No major functional differences.

2S7E pan. Added ribs to front of pan.

3M4E pan (3M4Z-6675-BA service number) Same as 2S7E but has improved baffle inside the pan for better drainback of oil to pickup.

5L8E pan (5L8Z-6675-AA service number). Same as 3M4E but has oil pan gasket integrated into the pan rail.

All of the improved pans above would fit on older Contours, Cougars, etc. The oil pan is independant of the pickup screen & windage tray. You don't have to run a old/new level pickup & windage tray with a old/new level pan because the location of the pickup in the pan has not changed.

However, to run the newer windage tray, you need to use the newer pickup with the newer bolts/studs. This is because the newer tray has different mounting points for the pickup. Don't try and just use your old studs and move them around to a different location. The newer studs have a different head thickness so you would change the clearance of the pickup to the bottom of the pan. So to summarize, don't mix old pickup, tray, and bolts with new. Go all old or all new.







forgive the possibly stupid post:

What are the esentially RWD pan differences?

--------------------
Tea 82 242Ti
Proud former owner - Samantha
'98 SVT #2253

Reborn Aug 21 2002
Cobra Paradise

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#798078 (Re: Horse) 12/20/04 02:02 PM

Originally posted by Horse:


forgive the possibly stupid post:

What are the esentially RWD pan differences?




Shape to fit.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
nickvinkcsvt
Newbie

Reged: 12/08/04
Posts: 4
Re: Pics of Taurus pan vs. new Escape pan new
#815296 (Re: todras) 01/11/05 06:29 PM

might be another stupid post.

I understand all the differences between all the different pans. But is that to say that the stock oil pan on a 2000+ 3.0 is not as good as lets say the 5L8E? Would it be a better idea to change it out anyway whilst I have the engine outta the car?

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#815986 (Re: nickvinkcsvt) 01/12/05 06:15 AM

Originally posted by nickvinkcsvt:
But is that to say that the stock oil pan on a 2000+ 3.0 is not as good as lets say the 5L8E?



Correct.

The 3M4Z pan or 5L8E pan are the best revision by far.

The only difference between them is the 5L8E pan has the integrated gasket. (and the kit is now $25 more expensive )

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
gotapex
CEG'er

Reged: 01/21/05
Posts: 316
Re: Pics of Taurus pan vs. new Escape pan new
#823907 (Re: DemonSVT) 01/21/05 12:30 PM

Anyone seen one of these for the 3L? Baffled, increased capacity.



Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#823960 (Re: gotapex) 01/21/05 02:16 PM

Originally posted by gotapex:
Anyone seen one of these for the 3L? Baffled, increased capacity.





No. Who modifies that?

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
gotapex
CEG'er

Reged: 01/21/05
Posts: 316
Re: Pics of Taurus pan vs. new Escape pan new
#824481 (Re: todras) 01/22/05 12:06 AM

Originally posted by todras:

No. Who modifies that?




Noble cars. It's part of a track day package, which keeps the engine from being oil-starved. Also comes with mocal oil cooler and accusump system.

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#826219 (Re: gotapex) 01/24/05 02:33 PM

If that's Noble's I'll save my $900 thanks.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#826465 (Re: todras) 01/24/05 07:36 PM

FYI. Post on that pan.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
fordrule
CEG'er

Reged: 07/31/04
Posts: 124
Loc: korea, soon Savannah GA
Re: Pics of Taurus pan vs. new Escape pan new
#1077331 (Re: todras) 10/17/05 12:44 AM

i thought 01+ motors come with the upgraded pickupand tray

i have a 02 sable 3.0L

i got the 5L8Z-6675-AA PAN.

when i was trying to bolt the pan up the pickup was hitting the pan. do i need the other pickup?

--------------------
2000 mercury cougar V6 5spd
3.0L SVT mated to my HMS tranny......

a wolf in sheeps clothing

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: Pics of Taurus pan vs. new Escape pan new
#1077501 (Re: fordrule) 10/17/05 03:54 AM

Originally posted by fordrule:
i thought 01+ motors come with the upgraded pickupand tray

i have a 02 sable 3.0L

i got the 5L8Z-6675-AA PAN.

when i was trying to bolt the pan up the pickup was hitting the pan. do i need the other pickup?



All 01+ engines come with the YL8Z windage tray.

ONLY the Escape/Tribute engines come with the YL8Z pickup tube. (& compatible oil pan)

The Taurus/Sable engine uses both a different pick up tube and different pan. (among other things)

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
Bill J. at Team Ford
CEG'er

Reged: 08/01/05
Posts: 355
Loc: Las Vegas, NV
Re: Pics of Taurus pan vs. new Escape pan new
#1286651 (Re: vudusvt) 07/26/06 05:42 PM

Originally posted by vudusvt:
Hmmm. Mine looks just like that and its PN is 3M4Z6675BA.
Got it from Bill, too. He assured me that it was the latest revision after I asked about the YZxxxxx version.




Yes 3M4Z-6675-BA is a good pan, that has since been replaced by the 5L8Z-6675-AA. Both will work, but I think the 5L8Z now comes with the integral gasket, were the 3M4Z had the steel/rubber one.

--------------------
Bill Jenkins
Team Ford, Internet Parts Dept.
5445 Drexel Rd.
Las Vegas, NV 89130
CLICK HERE to order parts
Ford parts at wholesale prices

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: Pics of Taurus pan vs. new Escape pan new
#1286658 (Re: Bill J. at Team Ford) 07/26/06 05:55 PM

Huh? He posted over 2 years ago.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | 4 | 5 | (show all)


Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  bnoon, PA 3L SVT 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 19129

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.042 seconds in which 0.028 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company