Contour Enthusiasts Group CEG

Modifications >> 3.0L Duratec

Pages: 1 | 2 | 3 | (show all)
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
3L part numbers here only please
#233187 - 03/28/03 02:05 PM

Here are some of the part numbers for aftermarket and/or Ford OEM 3L parts. If anyone has any corrections or things to add to this post, please do so. Please keep other comments and/or questions in other threads please so that this post is just as informational as it can be. If you have part numbers, please post them here, then PM me and I'll add them to the list in the first post (this one) so we can keep scanning for part numbers to a minimum. 3L related parts only.

Note: Prices listed are what I have paid in the past and may not be current with today's pricing at your local parts store.

Seals and gaskets:
  • Fel-Pro Part# 70149 EGR gasket
  • Fel-Pro Part# ES72159 Head bolt set,2.5L 2 req. $16.92ea
  • Fel-Pro Part# TCS45966 Camshaft rear seal gasket set $6.95
  • Fel-Pro Part# CS9038 Gasket set, lower conversional $72
  • Fel-Pro Part# TCS45967 Crankshaft front seal $14.55
  • Fel-Pro Part# HS9038PT Head set , conversional $231.15 <--- Includes 2.5L head gaskets that you don't need.
  • Fel-Pro Part# MS95726 Intake manifold gasket set $30.15
  • Fel-Pro Part# OS30675R Oil pan set $35.27
  • Fel-Pro Part# VS50462 Valve cover set $32.59
  • BCA part# 3909 Crankshaft oil seal $13.32
  • BCA part# 5277 Crankshaft oil seal (teflon) $16.76
  • BCA part# 99363 Crankshaft oil seal (redi-sleeve) $33.50
  • BCA part# 88187 Harmonic balancer Sleeve $4.18
  • BCA part# 482041N Oil seal, front timing cover $7.67
  • BCA part# 99187 Oil seal, front timing cover (redi-sleeve) $22.58
  • Fel-Pro Part# 61006 SE TB gasket $1.59
  • Spectra Premium # 1719 non-SVT radiator $138.41

Clevite 77 bearings:
  • CB-1772P Rod bearing, available in standard, -.25MM, -.50MM, and -.75MM.
  • MS-2207 Mains (not yet available)

Federal Mogul:
  • 7262M- Standard Grade Main bearings (also available in non standard grade)
  • 6-4395A- standard grade rod bearings (also available in non standard grade)

Ford part numbers:
  • Lower cylinder block retaining bolts: F5RZ-6345-C need 4
  • F5RZ-6345-D need 8
  • F5RZ-6345-E need 5
  • F6DZ-6345-CA need 5
  • Connecting rod bolts: F3LY-6214-A need 12
  • Piston rings: YF1Z6148BA 30.03 (does 2 pistons)
  • VALVE-EXHAUST: F6DZ6505A
  • VALVE-INTAKE: F6DZ6507A
  • ST220 VALVE-SPRING: 2S7Z-6513-AA
  • Motor mount/Powersteering bracket parts (needed for mid '98 and previous years to fit to the 3L block):
    Bracket: 1S7Z3A732AA $32.72 LIST
    Long Bolts: W704693S309 $5.22/EA. LIST
    Short Bolts: W704694S309 $3.53/EA. LIST


ARP bolts:
  • ARP Head Studs 253-4701
  • ARP Main stud kit 253-5402


--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
SVTMike
Hard-core CEG'er

Reged: 05/21/02
Posts: 1379
Loc: Taylor, Michigan
Re: 3L part numbers here only please new
#233279 (Re: bnoon) 03/28/03 03:24 PM

A moderator should stick this to the top.

--------------------
~~~~~~Mike~~~~~~
Black 2006 VW Rabbit

Silver 2000 Contour SVT - SOLD
~~~~The Car~~~~~

Post Extras: Print Post Remind Me! Notify Moderator
96BlackSE
Hard-core CEG'er

Reged: 08/15/02
Posts: 1210
Loc: Ottawa, Ontario
Re: 3L part numbers here only please new
#233291 (Re: SVTMike) 03/28/03 03:39 PM

VALVE-EXHAUST F6DZ6505A
VALVE-INTAKE F6DZ6507A
ST220 VALVE-SPRING 2S7Z-6513-AA

Motor mount/Powersteering bracket:
Bracket: 1S7Z3A732AA $32.72 LIST
Long Bolts: W704694S309 $5.22/EA. LIST
Short Bolts: W704693S309 $3.53/EA. LIST

ARP Head Studs 253-4701
ARP Main stud kit 253-5402

Just a few which were recently posted

--------------------
3.0 14.392@97.237 2.302 60ft
OEM 4-bolt LCA's $105 each
Watch me go


Post Extras: Print Post Remind Me! Notify Moderator
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
Re: 3L part numbers here only please new
#233760 (Re: 96BlackSE) 03/28/03 08:50 PM

Originally posted by 96BlackSE:
VALVE-EXHAUST F6DZ6505A
VALVE-INTAKE F6DZ6507A
ST220 VALVE-SPRING 2S7Z-6513-AA

Motor mount/Powersteering bracket:
Bracket: 1S7Z3A732AA $32.72 LIST
Long Bolts: W704694S309 $5.22/EA. LIST
Short Bolts: W704693S309 $3.53/EA. LIST

ARP Head Studs 253-4701
ARP Main stud kit 253-5402

Just a few which were recently posted




Which year bracket is that? It was mid '98+, right??? Let me know and I'll edit my top post to reflect it.

--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
96BlackSE
Hard-core CEG'er

Reged: 08/15/02
Posts: 1210
Loc: Ottawa, Ontario
Re: 3L part numbers here only please new
#239905 (Re: bnoon) 04/03/03 06:29 PM

oops missed this post hehe

it says they changed mid98+ in the thread

--------------------
3.0 14.392@97.237 2.302 60ft
OEM 4-bolt LCA's $105 each
Watch me go


Post Extras: Print Post Remind Me! Notify Moderator
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
Re: 3L part numbers here only please new
#240836 (Re: 96BlackSE) 04/04/03 02:46 PM

Thanks. Anyone else??? I know there's a lot more parts out there. Let's get some more part numbers here!

--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
bmxcontour
CEG'er

Reged: 08/16/02
Posts: 451
Loc: Toledo, OH originally now in Seoul, Korea
Re: 3L part numbers here only please new
#242927 (Re: bnoon) 04/07/03 12:56 AM

fel-pro EGR gasket is 70149

--------------------
95 SE ATX
Electric red
mucho mods

2005 Scion xB
Black Sand Pearl
tinted windows
red leather steering wheel

US Army Mechanic

Post Extras: Print Post Remind Me! Notify Moderator
yungin16TX
CEG'er

Reged: 10/29/02
Posts: 54
Loc: Harris County, Katy Suburb, Fry RD. and i-10
Re: 3L part numbers here only please new
#283901 (Re: bnoon) 05/13/03 07:07 PM

are these allthe parts neccessary to upgrade to a 3.0L?
just out of curiousity,
what are the horsepower/torque/acceleration etc. advantages to a 3.0L vs the 2.5?
also

what if i wanted to put a V8 in my contour.. are there any smallblocks that would fit?

Thanx!!

--------------------
Jeremy AKA Jai
**'95 SE Contour / Midnight Purple (R.I.P)**
--------------------------------------------
Hopefully soon to own a candy red 1992 Caddilac STS ~ w00t w00t!

Post Extras: Print Post Remind Me! Notify Moderator
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
Re: 3L part numbers here only please new
#284034 (Re: yungin16TX) 05/13/03 08:38 PM

Jai, please ask your questions in a new 3L forum thread of your own after searching. That way this thread can remain a sticky full of part numbers only and not generally easy questions to answer. After searching and/or posting your questions, if you still have more questions, please feel free to PM or email me or any one of the more seasoned members.

--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
Russell-3L
Hard-core CEG'er

Reged: 08/23/02
Posts: 3732
Loc: Pittsburgh, PA
Re: 3L part numbers here only please new
#360338 (Re: bnoon) 07/26/03 07:51 PM

how much do these usually cost?


ARP bolts:

ARP Head Studs 253-4701
ARP Main stud kit 253-5402

--------------------
Russell
Oval Port 3L Nearly Done
MTX75 w/ Homebrew Zetec FD and Torsen Complete

Post Extras: Print Post Remind Me! Notify Moderator
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
Re: 3L part numbers here only please new
#361356 (Re: Russell-3L) 07/28/03 05:14 AM

Call an ARP dealer with those part numbers and report back. There have only been a few people to even use them that I know of...

--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: 3L part numbers here only please new
#458484 (Re: bnoon) 11/19/03 07:09 AM

I have found all the Fel-Pro gasket I have used to be better quality then the OEM. I added in a few measurements; I have more.
I am very impressed with the Fel-pro parts. Also most of the gaskets are larger than OEM so they accomodate porting perfectly.

Sorry for the repeats as I just cut and paste.

Part Numbers

Fel-Pro Part# CS9038 2.5L Conversion Kit (includes oil pan gasket, oil seals etc)
Fel-Pro Part# HS9038PT 2.5L Head Gasket Set
Fel-Pro Part# 9038PT 2.5L Left Hand Head Gasket
Fel-Pro Part# 9039PT 2.5L Right Hand Head Gasket
Fel-Pro Part# 9540PT 3L Left Hand Head Gasket
Fel-Pro Part# 9541PT 3L Right Hand Head Gasket
Fel-Pro Part# ES72159 Head Bolt Set (2 req.)
Fel-Pro Part# MS92586 3L Plastic Oval Port Intake Manifold Set
Fel-Pro Part# MS95715 Exhaust Manifold Gasket (53mm x 32mm)
Fel-Pro Part# MS95726 2.5L Intake Manifold Gasket Set
Fel-Pro Part# SS72873-1 Valve Stem Seals (Viton)
Fel-Pro Part# VS50462 Valve Cover Set
Fel-Pro Part# TCS45966 Camshaft Rear Seal Gasket Set
Fel-Pro Part# TCS45967 Crankshaft Front Seal
Fel-Pro Part# OS30675R Oil Pan Set
Fel-Pro Part# 61006 SVT TB Gasket

2S7Z-6513-AA ST220 Valve Springs (measured 161-163 lb/in)
YF1Z-6513-FA Duratec Valve Springs (rated 153 lb/in per manual)
3F1Z-6564-AA New Roller Finger Followers
3M4Z-6675-BA Upgraded Oil Pan Set (2 drain back channels and better lower baffles comes with gasket and hardware)
4F1Z-6065-AA Head Bolts
F3LY-6214-A Connecting Rod Bolts
F5AZ-6700-A 3.0 Front Crankshaft Seal
F5AZ-6701-A 3.0 Rear Crankshaft Seal
F5DZ-9E936-AE SVT TB Gasket
F5RZ-2A411-A 2.5L UIM Plastic Retainer Grommet with Brass Insert Sleeve
F5RZ-2L181-AA 2.5L UIM Plastic Retainer Grommet
F5RZ-6020-A 2.5 Right Front Timing Cover Gasket
F5RZ-6020-B 2.5 Center Front Timing Cover Gasket
F5RZ-6020-C 2.5 Left Front Timing Cover Gasket
F5RZ-6584-B 2.5 Right Valve Cover Gasket
F5RZ-6584-C 2.5 Left Valve Cover Gasket
F5RZ-9439-B 2.5 Lower Intake Manifold Gasket
F5RZ-9H486-BA 2.5 Upper Intake Manifold Gasket
XF1Z-6051-BA 3.0 Right Head Gasket
XF1Z-6051-DA 3.0 Left Head Gasket
XW4Z-9448-AA Duratec Exhaust Manifold Gasket (50mm x 26mm)
YL8Z-6622-BA 01+ Upgraded Windage Tray (req 01+ main studs)
YL8Z-6687-AA 01+ Upgraded Oil Pickup (req 01+ main studs)

F5RZ-17285-AA MTX-75 Speedo Gear
F7RZ-4211-AC Differential Bearings (2 req)
XS8Z-7230-DD 1-2 Shifter Fork, Roller Bearings (02+)
YS2Z-7230-BA 5-R Shifter Fork, Revised (00)
YS4Z-7230-AD 3-4 Shifter Fork, Modified Oil Scraper (01+)
YS4Z-7K453-FA Shifter Retaining Clip
XS4Z-7201-CD Upgraded Shifter Tower (03+)

BCA part# 3909 Crankshaft Oil Seal
BCA part# 5277 Crankshaft Oil Seal (Teflon)
BCA part# 99363 Crankshaft Oil Seal (redi-sleeve)
BCA part# 88187 Harmonic Balancer Sleeve
BCA part# 482041N Oil Seal, Front Timing Cover
BCA part# 99187 Oil Seal, Front Timing Cover (redi-sleeve)

Spectra Premium# 1719 SVT Radiator

Clevite 77# CB-1772P - Standard, -.25MM, -.50MM, and -.75MM - Rod Bearings
Clevite 77# MS-2207 - Main Bearings

Federal Mogul# 7262MA - Main Bearings
Federal Mogul# 6-4395A Rod Bearings

Stant Part# 13396 160 Degree T-Stat

Bosch# 13246 - L1H1 Wideband O2 Sensor

K&N Filters
Tapered Conical - DB x DT x L
RF-1045 (5.5 x 4 x 8) = 720cfm
RC-4630 (5.5 x 4.5 x 6.5) = 615cfm
RE-0950 (6 x 4.625 x 6) = 605cfm
RE-0920 (6 x 4.625 x 9) = 900cfm
RU-3530 (5.375 x 4.375 x 7) = 645cfm (3.75" flange)
Straight Conical - D x L
RU-1785 (5 x 8.5) = 800cfm

Rotunda Tool Set - Essential
T94P-6136-AH Connecting Rod Guides
T94P-6256-AH Camshaft Seal Protector
T94P-6256-BH Camshaft Seal Replacer
T94P-6256-DH Camshaft Damper Replacer
T94P-6312-AH Water Pump Pulley Remover/Replacer
T94P-6312-BH Water Inlet Tube Replacer
T94P-6510-BH Valve Guide Replacer Adapter
T94P-6510-CH Valve Stem Seal Replacer
T94P-6256-CH Camshaft Alignment Triming Tool
T94P-6510-AH Valve Stem Seal Remover
T94P-6510-DH Valve Guide Replacer Adapter
T94P-6565-AH Valve Spring Compressor Adapter
T94P-4451-AH Measuring Fixture
T94P-4451-BH Differential Shim Selection Tool Adapter
T94P-7025-BH Multi-Bearing Cup Replacer
T94P-7025-CH Differential Drive Shaft Seal Replacer
T94P-7025-DH Selector Shaft Bearing Remover/Replacer
T94P-7025-EH Pinion Spline Socket
T94P-7025-FH Gear Lever Aligning Tool
T94P-7025-GH Differential Bearing Cone Replacer
T94P-7025-HH Selector Shaft Seal Remover/Replacer
T94P-2100-AH Sub Frame Alignment Pin Set
T94P-6000-AH Power Train Alignment Gauge Set
T94P-70010-AH Transmission Range Sensor Tool

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
ssmumich00
Hard-core CEG'er

Reged: 12/11/01
Posts: 2676
Loc: Hurricane Valley
Re: 3L part numbers here only please new
#535105 (Re: bnoon) 02/18/04 07:57 PM

ARP Head Studs are $240 from batinc.net, FYI

--------------------
New Ride

Post Extras: Print Post Remind Me! Notify Moderator
Bill @ SigLM
CEG'er

Reged: 06/03/02
Posts: 201
Loc: Las Vegas, NV
Re: 3L part numbers here only please new
#577470 (Re: bnoon) 04/02/04 10:29 PM

I just came across a new part # for a 3.0L short block, NEW. The build date is from 04/01/03 and is the same part # for Sable, Taurus, Escape.

4F1Z-6009-BA List $702.55 Inet $526.91 Core $500.00

I am not sure yet if I can use a 2.5 core for that. I will have to check, but DAMN that is cheap.

--------------------
Bill Jenkins

I am moving to Team Ford as of 08/01/05 (www.teamfordlv.com). I will post new info when it's ready.

Post Extras: Print Post Remind Me! Notify Moderator
Massiv
CEG'er

Reged: 10/08/02
Posts: 117
Loc: Toronto, Canada
Re: 3L part numbers here only please new
#646198 (Re: Bill @ SigLM) 06/21/04 06:18 PM

Here is the TTY Crank Pulley Bolt P/N:
W701-512-S301

Also, at least for the 2004 Ford Escape (and I believe some earlier engines, hopefully someone can clarify), the 4 main bolts required indicated as: F5RZ-6345-E, are replaced/indicated for this engine with/as: YL8Z-6345-AA

Massiv.

--------------------
1999 Mercury Cougar V6.

Post Extras: Print Post Remind Me! Notify Moderator
SpliceVW
Veteran CEG'er

Reged: 02/24/03
Posts: 839
Loc: Springfield
Re: 3L part numbers here only please new
#657301 (Re: Bill @ SigLM) 07/06/04 01:05 PM

Originally posted by Bill @ SigLM:
I just came across a new part # for a 3.0L short block, NEW. The build date is from 04/01/03 and is the same part # for Sable, Taurus, Escape.

4F1Z-6009-BA List $702.55 Inet $526.91 Core $500.00

I am not sure yet if I can use a 2.5 core for that. I will have to check, but DAMN that is cheap.




Any idea yet if you can use the 2.5 core?

--------------------
The Spickle
New Car: Infra Red '04 FSVT

Former Car: Black '98 CSVT, #3137/6535 "The Unluckiest car.. ever"


Post Extras: Print Post Remind Me! Notify Moderator
rkneeshaw
Hard-core CEG'er

Reged: 12/06/01
Posts: 3570
Loc: Petoskey, Michigan
Re: 3L part numbers here only please new
#657474 (Re: SpliceVW) 07/06/04 04:43 PM

Originally posted by SpliceVW:
Any idea yet if you can use the 2.5 core?




Yes, you can. I did

--------------------
1996 Contour SE 3.0

<Alternate Site on CarDomain>

Post Extras: Print Post Remind Me! Notify Moderator
SpliceVW
Veteran CEG'er

Reged: 02/24/03
Posts: 839
Loc: Springfield
Re: 3L part numbers here only please new
#657550 (Re: rkneeshaw) 07/06/04 06:02 PM

Originally posted by rkneeshaw:
Originally posted by SpliceVW:
Any idea yet if you can use the 2.5 core?




Yes, you can. I did




Does one with bad bearings count?

--------------------
The Spickle
New Car: Infra Red '04 FSVT

Former Car: Black '98 CSVT, #3137/6535 "The Unluckiest car.. ever"


Post Extras: Print Post Remind Me! Notify Moderator
rkneeshaw
Hard-core CEG'er

Reged: 12/06/01
Posts: 3570
Loc: Petoskey, Michigan
Re: 3L part numbers here only please new
#658200 (Re: SpliceVW) 07/07/04 02:06 PM

Originally posted by SpliceVW:
Originally posted by rkneeshaw:
Originally posted by SpliceVW:
Any idea yet if you can use the 2.5 core?




Yes, you can. I did




Does one with bad bearings count?




My 2.5L with a hole in the #6 piston counted

--------------------
1996 Contour SE 3.0

<Alternate Site on CarDomain>

Post Extras: Print Post Remind Me! Notify Moderator
Swazo
Hard-core CEG'er

Reged: 08/20/02
Posts: 4970
Loc: Land of the watered-down expletives... you fetching fetchers!
Re: 3L part numbers here only please new
#838276 (Re: rkneeshaw) 02/05/05 07:59 PM

I hate to clutter up this post, but.....

Originally posted by DemonSVT:
Spectra Premium# 1719 SVT Radiator





Are you sure about that PN? I ask because I am finding ATX and MTX radiators under this one, and no sign of it being an SVT replacment. I have ended up just buying a new radiatior from Ford since my SVT has a non-SVT radiator (has ATX cooling lines), but I thought I would bring light onto this as I don't think it's 100% correct.




--------------------
2005 Ford F150 SuperCab FX4
1964 Chevrolet Impala SS
1998 CSVT: 354HP/328TQ @ 10 psi, now gone

Post Extras: Print Post Remind Me! Notify Moderator
DemonSVT
Hard-core CEG'er

Reged: 09/13/00
Posts: 9602
Loc: KC, MO
Re: 3L part numbers here only please new
#838395 (Re: Swazo) 02/05/05 10:26 PM

Originally posted by Swazo:
I hate to clutter up this post, but.....

Originally posted by DemonSVT:
Spectra Premium# 1719 SVT Radiator





Are you sure about that PN? I ask because I am finding ATX and MTX radiators under this one, and no sign of it being an SVT replacment. I have ended up just buying a new radiatior from Ford since my SVT has a non-SVT radiator (has ATX cooling lines), but I thought I would bring light onto this as I don't think it's 100% correct.



Couldn't tell you to be sure.

It was just transfered off an old list posted long ago.

I've since removed it from my website quite a while ago.

--------------------
2000 SVT #674
13.47 @ 102 - All Motor!

It was not broke; Yet I fixed it anyway.

Post Extras: Print Post Remind Me! Notify Moderator
bnoonModerator
Redneck Troll

Reged: 06/13/00
Posts: 2621
Loc: West Des Moines, IA
Re: 3L part numbers here only please new
#841316 (Re: DemonSVT) 02/08/05 06:25 PM

Originally posted by DemonSVT:
Originally posted by Swazo:
I hate to clutter up this post, but.....

Originally posted by DemonSVT:
Spectra Premium# 1719 SVT Radiator





Are you sure about that PN? I ask because I am finding ATX and MTX radiators under this one, and no sign of it being an SVT replacment. I have ended up just buying a new radiatior from Ford since my SVT has a non-SVT radiator (has ATX cooling lines), but I thought I would bring light onto this as I don't think it's 100% correct.



Couldn't tell you to be sure.

It was just transfered off an old list posted long ago.

I've since removed it from my website quite a while ago.




If you look at the first post, the 1719 has been confirmed to be a non-SVT radiator.

--------------------
http://www.bnmotorsports.com
"And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my CEG brothers. And you will know I am the Moderator when I lay my vengeance upon you."

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: 3L part numbers here only please new
#850051 (Re: bnoon) 02/16/05 10:41 PM

This isn't a 3L specific part but should be changed when pulling the engine because it's so hard to get to. It's a fuel vapor hose and it runs from the UIM to it's connector on the firewall. It becomes very brittle over time as I've found out. It's about $20 from Bill J. It's a ribbed plastic tube and locks into one of the 2 ports on the FW. Part number is F6RZ-9K313-BC. Bill Jenkins had took a while to find this so I thought this would help.

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
SpeedTeufel
CEG'er

Reged: 09/24/02
Posts: 98
Loc: MD,USA
Re: 3L part numbers here only please new
#990059 (Re: Bill @ SigLM) 07/05/05 06:20 AM

Bill, can you get the 3.0L shortblock for this price?, if so please let me know, I want to order one.
Thanks

--------------------
98.5 Black SVT
65 Red Mustang coupe 289 hi-po

Post Extras: Print Post Remind Me! Notify Moderator
Swazo
Hard-core CEG'er

Reged: 08/20/02
Posts: 4970
Loc: Land of the watered-down expletives... you fetching fetchers!
Re: 3L part numbers here only please new
#991780 (Re: SpeedTeufel) 07/07/05 12:36 AM

Another source for head bolts....

CORTECO Part #27306, 1 set needed per head.


--------------------
2005 Ford F150 SuperCab FX4
1964 Chevrolet Impala SS
1998 CSVT: 354HP/328TQ @ 10 psi, now gone

Post Extras: Print Post Remind Me! Notify Moderator
Swazo
Hard-core CEG'er

Reged: 08/20/02
Posts: 4970
Loc: Land of the watered-down expletives... you fetching fetchers!
Re: 3L part numbers here only please new
#1026374 (Re: Swazo) 08/16/05 04:11 AM

Originally posted by Swazo:
Another source for head bolts....

CORTECO Part #27306, 1 set needed per head.





I found these are not the correct bolts yesterday, do disguard this option

--------------------
2005 Ford F150 SuperCab FX4
1964 Chevrolet Impala SS
1998 CSVT: 354HP/328TQ @ 10 psi, now gone

Post Extras: Print Post Remind Me! Notify Moderator
fordrule
CEG'er

Reged: 07/31/04
Posts: 124
Loc: korea, soon Savannah GA
Re: 3L part numbers here only please new
#1052765 (Re: Swazo) 09/18/05 05:54 AM

from demon's post how many of the TTY bolts of each application is needed?

--------------------
2000 mercury cougar V6 5spd
3.0L SVT mated to my HMS tranny......

a wolf in sheeps clothing

Post Extras: Print Post Remind Me! Notify Moderator
mamisano
Veteran CEG'er

Reged: 06/01/00
Posts: 759
Loc: Deer Park, NY
Re: 3L part numbers here only please new
#1087477 (Re: bnoon) 10/28/05 01:34 PM

Stock 3L rings: YF1Z-6148-BA.

The package contains 2 ring sets at a cost of $30 from Bill J. 3 Packages needed to complete whole motor.

"That part number was already in my original post! -BNOON"

--------------------
1998 SVT Contour E1, Black (Mine) - Winter 3.0 Project
2004 Sentra SE-R SpecV (Wifes)
www.SuperHawkForum.com

Edited by bnoon (12/27/05 04:41 PM)

Post Extras: Print Post Remind Me! Notify Moderator
todras
I have no life

Reged: 05/29/00
Posts: 21197
Loc: Grand Rapids, MI
Re: 3L part numbers here only please new
#1160062 (Re: DemonSVT) 02/02/06 05:02 PM

Originally posted by DemonSVT:

YL8Z-6622-BA 01+ Upgraded Windage Tray (req 01+ main studs)
YL8Z-6687-AA 01+ Upgraded Oil Pickup (req 01+ main studs)






FYI these 2 parts were transposed. Should be...

YL8Z-6622-BA 01+ Upgraded Oil Pickup (req 01+ main studs)
YL8Z-6687-AA 01+ Upgraded Windage Tray (req 01+ main studs)

--------------------
-'96 SE MTX 3L
-'98 SVT 1,173 of 6,535
-'05 Mazda 6s, loaded, g/f's ride
-Need a 96-00 manual on CD? PM or email me


Post Extras: Print Post Remind Me! Notify Moderator
Pages: 1 | 2 | 3 | (show all)


Extra information
0 registered and 1 anonymous users are browsing this forum.

Moderator:  bnoon, PA 3L SVT 

Print Thread

Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled

Thread views: 15047

Jump to

Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.02 seconds in which 0.012 seconds were spent on a total of 14 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company