Pole120
(Hard-core CEG\'er)
06/29/06 05:31 PM
What would you like to see come out of PRT?

Loking for CEG's input on products and services to be released from PRT's shop for the CDW-27 crowd. I've got several products in mind and in the works that are listed below, but i'ld also love for you guys to supply me with any products you'ld like to see released.

Suspension:

-Boxed front 2-bolt LCA's with shperical bearings in place of the bushings

-Tubular forward and rear arms for the rear suspension

-Tubular and triangulated RSTB

-Upgraded rear subframes

-Spherical endlinks for front and rear swaybars

-Front LCA boxing plates for 2 and 4 bolt arms

-Harness bar, perhaps with a camera mount


Performance:

-Beyond-optimized y-pipe, steps are taken to go beyond the usual optimiation for maximum flow, will be flow tested.

-Optimized TB's

-Fiberglass heatshields

-Fiberglass pin-on hood and trunk

-Mandrel cat-back fabrication


Asthetics:

-Powder and ceramic coating at insanly good prices

-Fiberglass paintable tank(p/s,brake,overflow) and battery covers, i may also look into haveing them CF wraped

-Acid dipped badges, antenna bases, grill rings for painting

-Badgeless SVT stock mesh grill - still working on this, may or may not happen on a more than one scale.

-Molded\repaired Splitters - no job too big, you'll see what i mean soon enough

-Molded jack-point covers into skirts

-Molded gauge pod in place of coin tray

-Shaved front keyhole door handles

-Mirko skidplates

Services:

-Intake re-bilding

-Suspension swaps

-Header installs

....i've done most everything maintanance wise at least once.


striker2
(Veteran CEG\'er)
06/29/06 05:45 PM
Re: What would you like to see come out of PRT?

tubular frt lower control arms with adjustable ball joints, and camber/caster adjustments for both 2 and 4 bolt designs (2 bolt will be easier obviosly, could use poly bushings or spherical links)

adjustable tie-rod ends to help eliminate bump steer for those that have extremly lowered their car.

frt strut tower braces that bolt to the towers and the firewall for added rigidity.

thats all i can think of for now.


Matt R
(Hard-core CEG\'er)
06/29/06 06:36 PM
Re: What would you like to see come out of PRT?

Originally posted by striker2:

frt strut tower braces that bolt to the towers and the firewall for added rigidity.





Excellent idea.


GTO Pete
(Hard-core CEG'er)
06/29/06 06:40 PM
Re: What would you like to see come out of PRT?

Some kind of high-strength, clear plastic to help protect all the breaking foglights.

Jeb Hoge
(Hard-core CEG\'er)
06/29/06 06:50 PM
Re: What would you like to see come out of PRT?

Continued improvement on camber kits.

GTO Pete
(Hard-core CEG'er)
06/29/06 06:58 PM
Re: What would you like to see come out of PRT?

Originally posted by Matt R:
Originally posted by striker2:

frt strut tower braces that bolt to the towers and the firewall for added rigidity.





Excellent idea.



Front strut tower bar that works with the camber kit.


mystiquevltwin
(Hard-core CEG\'er)
06/29/06 07:02 PM
Re: What would you like to see come out of PRT?

maybe some kind of true CAI for us zetec guys

this is a strech...but an aftermarket grille for the mysiques? (top or bottom)


CSVT1214
(Hard-core CEG\'er)
06/29/06 07:05 PM
Re: What would you like to see come out of PRT?

Originally posted by GTO Pete:
Some kind of high-strength, clear plastic to help protect all the breaking foglights.




+1

x 1000


ElKy
(Hard-core CEG'er)
06/29/06 07:06 PM
Re: What would you like to see come out of PRT?

how about a $250 bolt on V8, all-wheel drive conversion kit?


GTO Pete
(Hard-core CEG'er)
06/29/06 07:08 PM
Re: What would you like to see come out of PRT?

Originally posted by ElKy:
how about a $250 bolt on V8, all-wheel drive conversion kit?




$250 shipped right?


teamSVTour
(CEG\'er)
06/29/06 07:17 PM
Re: What would you like to see come out of PRT?

Mirko skidplate

ElKy
(Hard-core CEG'er)
06/29/06 07:21 PM
Re: What would you like to see come out of PRT?

nah..i'd pay shipping!


Ex-Mean'Tour
(Hard-core CEG\'er)
06/29/06 07:30 PM
Re: What would you like to see come out of PRT?

Originally posted by ElKy:
nah..i'd pay shipping!





Careful when you say that. With some of my recent ebay experiences... They might charge $250 for the engine/ AWD kit but then $3500 for shipping or something.

Not that Pole would do that. He's a straight up kinda guy.


Frosty
(Hard-core CEG\'er)
06/29/06 07:47 PM
Re: What would you like to see come out of PRT?

A partnership....I am in Marketing you know

Pole120
(Hard-core CEG\'er)
06/29/06 07:57 PM
Re: What would you like to see come out of PRT?

Originally posted by Frosty:
A partnership....I am in Marketing you know




You're already sponsored...now you want a cut too


GTO Pete
(Hard-core CEG'er)
06/29/06 08:03 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
Originally posted by Frosty:
A partnership....I am in Marketing you know



You're already sponsored...now you want a cut too



Greedy!!!

How about a free trip to Banned Camp?


csvtjohnga
(Veteran CEG\'er)
06/29/06 08:24 PM
Re: What would you like to see come out of PRT?

-Upgraded rear subframes

Beyond-optimized y-pipe, steps are taken to go beyond the usual optimiation for maximum flow, will be flow tested.

Mirko skidplates


todras
(I have no life)
06/29/06 11:05 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:


-Powder and ceramic coating at insanly good prices

-Mirko skidplates






And flying monkeys. What can I say. I've always wanted one. If you could do those 3 things that would be fantastic.



Loco4G63
(CEG road warrior)
06/30/06 01:48 AM
Re: What would you like to see come out of PRT?

Can you do any of this on Evo parts?

Pole120
(Hard-core CEG\'er)
06/30/06 02:23 AM
Re: What would you like to see come out of PRT?

Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?




Show me what you've got and i'll see if I can do anything for you


Ray
(Addicted CEG\'er)
06/30/06 02:28 AM
Re: What would you like to see come out of PRT?

He's got an EVO.. DUH!!!!



Pole120
(Hard-core CEG\'er)
06/30/06 02:42 AM
Re: What would you like to see come out of PRT?

Originally posted by Ray:
He's got an EVO.. DUH!!!!






You know what i meant


Loco4G63
(CEG road warrior)
06/30/06 02:51 AM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?




Show me what you've got and i'll see if I can do anything for you


I'm sure some poly mounts and a optimized TB would do some good on my car.

MLuko
(Hard-core CEG\'er)
06/30/06 03:41 AM
Re: What would you like to see come out of PRT?

Originally posted by EVOLUTION VIII:
Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?




Show me what you've got and i'll see if I can do anything for you


I'm sure some poly mounts and a optimized TB would do some good on my car.




10 inch cat-back with a garbage can for a muffler

I would like to see stickers!!! AND LOTS OF THEM


JeSiZZle
(Hard-core CEG\'er)
06/30/06 01:42 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
Originally posted by EVOLUTION VIII:
Can you do any of this on Evo parts?




Show me what you've got and i'll see if I can do anything for you



you show him yours and hell show you his
queers


Dr. Cross
(CEG\'er)
06/30/06 06:04 PM
Re: What would you like to see come out of PRT?

Dash warp repair kit/parts for those of us that had some of the warp "fixed" by a dealer (ie u-clips to hold the dash down).

Frosty
(Hard-core CEG\'er)
06/30/06 06:14 PM
Re: What would you like to see come out of PRT?

Originally posted by GTO Pete:
Originally posted by Pole120:
Originally posted by Frosty:
A partnership....I am in Marketing you know



You're already sponsored...now you want a cut too



Greedy!!!

How about a free trip to Banned Camp?



I have ALWAYS wanted to go there!!


JeSiZZle
(Hard-core CEG\'er)
06/30/06 06:37 PM
Re: What would you like to see come out of PRT?

ive been there...

its not all its cracked up to be


Pole120
(Hard-core CEG\'er)
06/30/06 06:42 PM
Re: What would you like to see come out of PRT?

Back on topic......

Harrry
(Hard-core CEG\'er)
06/30/06 07:52 PM
Re: What would you like to see come out of PRT?

I think a true duals mandrel catback.

Pudmunkie
(Hard-core CEG\'er)
06/30/06 08:32 PM
Re: What would you like to see come out of PRT?

Originally posted by Rickson:
I think a true duals mandrel catback.



As long as its balanced for sound so we dont have the cessna sound!


Harrry
(Hard-core CEG\'er)
06/30/06 11:21 PM
Re: What would you like to see come out of PRT?

Originally posted by Pudmunkie:
Originally posted by Rickson:
I think a true duals mandrel catback.



As long as its balanced for sound so we dont have the cessna sound!



I am still wating for my rolex lol.


A reasonable true dual catback tubing. We can add our own mufflers like truebndz does. That would be really good.




wa2tuff
(Hard-core CEG\'er)
07/15/06 03:12 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:


Suspension:

-Tubular forward and rear arms for the rear suspension

-Spherical endlinks for front and rear swaybars



Performance:

-Fiberglass heatshields

-Mandrel cat-back fabrication


Asthetics:

-Fiberglass paintable tank(p/s,brake,overflow) and battery covers, i may also look into haveing them CF wraped

-Molded jack-point covers into skirts

-Mirko skidplates







Yes, by all means!!


morbid
(Veteran CEG\'er)
07/17/06 07:56 PM
Re: What would you like to see come out of PRT?

If you're able to do carbon fiber.... a CF sunroof panel?

Pole120
(Hard-core CEG\'er)
07/17/06 08:20 PM
Re: What would you like to see come out of PRT?

The tubular suspension components will be developed this winter while i build the shop's race SVT, don't expect to see anything production-wise till next summer on those pieces.

LCA Plates and Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.

I cannot do CF. however have several leads on places that can do CF wrapping.


Pole120
(Hard-core CEG\'er)
07/31/06 12:36 AM
Re: What would you like to see come out of PRT?

Keep an eye our soon for:

-Spherical front and rear swaybar endlinks

-Air\oil seperators

-fiberglass heatshields

-filter brackets for the popular RU3530 intake

-intake KITS (filter,adapter,heatshield & bracket)


morbid
(Veteran CEG\'er)
07/31/06 10:04 AM
Re: What would you like to see come out of PRT?

sweet! Looks like some good stuff.... I hope you do the front end links first


CSVT1214
(Hard-core CEG\'er)
07/31/06 12:30 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
-fiberglass heatshields

-filter brackets for the popular RU3530 intake






buttersSVT
(CEG\'er)
08/07/06 04:40 AM
Re: What would you like to see come out of PRT?

it would be cool to see some front tubular LCA's, not shure if it could be done or if its really pratical....but if i can be done you can do it

buttersSVT
(CEG\'er)
08/07/06 06:00 AM
Re: What would you like to see come out of PRT?

Originally posted by burninrice:
it would be cool to see some front tubular LCA's, not shure if it could be done or if its really pratical....but if i can be done you can do it



edit noticed it was already mentioned


xchang
(Hard-core CEG\'er)
08/11/06 02:33 PM
Re: What would you like to see come out of PRT?

How about my Mirko?

Frosty
(Hard-core CEG\'er)
08/11/06 04:22 PM
Re: What would you like to see come out of PRT?

Originally posted by xchang:
How about my Mirko?



Lol..it's back in one piece...kinda


Pole120
(Hard-core CEG\'er)
08/12/06 11:10 AM
Re: What would you like to see come out of PRT?

Originally posted by Frosty:
Originally posted by xchang:
How about my Mirko?



Lol..it's back in one piece...kinda




I'm a buy guy these days

Once i get my two core TB's done monday i'll be developing the PCV oil seperator. After taht project is done,tested and interest checked i'll most likely be looking into endlinks as wells as K&N filter brackets.

Frosty....shoot me an e-mail with any new information this thread develops please


99Mystique ATX
(Hard-core CEG\'er)
08/18/06 01:04 AM
Re: What would you like to see come out of PRT?

I would definitely be interested in the PCV Oil separator... If you need someone to test fitment and whatnot...

Pole120
(Hard-core CEG\'er)
08/18/06 05:31 PM
Re: What would you like to see come out of PRT?

Originally posted by 99Mystique ATX:
I would definitely be interested in the PCV Oil separator... If you need someone to test fitment and whatnot...




I have two SVT's at my disposal for testing, i'm assembling the required parts this weekend and will install/test next week and let everyone know how it works out.

~Josh


teamSVTour
(CEG\'er)
08/24/06 05:24 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.






So how are they coming along?


Pole120
(Hard-core CEG\'er)
08/25/06 05:07 PM
Re: What would you like to see come out of PRT?

Originally posted by teamSVTour:
Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.






So how are they coming along?




Slowly....i'm verry sorry, but i'm more tah nbacked up right now and i'm trying t oget caught up.

~Josh


SVT SNOB
(Hard-core CEG\'er)
08/25/06 05:32 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:
Originally posted by teamSVTour:
Originally posted by Pole120:
Mirko Skid plates (all plasma cut) will be drawn and quoted within the next couple weeks.






So how are they coming along?




Slowly....i'm verry sorry, but i'm more tah nbacked up right now and i'm trying t oget caught up.

~Josh




Stop slacking and get back to work . Ok just kidding please dont jack up the price on my skidplate lol.

Aaron


Pole120
(Hard-core CEG\'er)
08/31/06 03:00 AM
Re: What would you like to see come out of PRT?

1) testing begins next week on the air\oil seperator

2) filter brackets should come out in a week or two

3) end-links....not sure as of yet, i want to test them myself before i do anyhting farther

4) i'll start drawing up the skid plates next week and hopefully have something to show by the end of Sept.



KingpinSVT
(Addicted CEG\'er)
08/31/06 03:27 AM
Re: What would you like to see come out of PRT?

I was just digging through some old threads, you should do a harness bar! Something like dion had.

I would rather see that than endlinks, since I can name 2 people who already make nice sets of those


csvtjohnga
(Veteran CEG\'er)
08/31/06 03:30 AM
Re: What would you like to see come out of PRT?

didnt someone a LONG time ago produce or make custom traction bars of somesort? that'd be GREAT!

i agree with Kingpin, a harness bar would kick arse


Pole120
(Hard-core CEG\'er)
08/31/06 12:57 PM
Re: What would you like to see come out of PRT?

Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar!




I started mocking one up almost a year ago, but never finished it.....i may have to re-visit the idea.

~Josh


BrApple
(Hard-core CEG'er)
08/31/06 01:30 PM
Re: What would you like to see come out of PRT?

Originally posted by Pole120:


4) i'll start drawing up the skid plates next week and hopefully have something to show by the end of Sept.






sweet, car gets painted in october ... hopefully sooner and this will be a good thing to have


teamSVTour
(CEG\'er)
08/31/06 05:47 PM
Re: What would you like to see come out of PRT?

yea my Mirko is waiting to get painted...I'd love to have the skid plates done as early as possible so I can run the Mirko atleast a little before it starts snowing

111R
(Veteran CEG\'er)
08/31/06 07:02 PM
Re: What would you like to see come out of PRT?

Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar! Something like dion had.

I would rather see that than endlinks, since I can name 2 people who already make nice sets of those





X 1,000,000,000

i believe dion had a improvised wrx bar


morbid
(Veteran CEG\'er)
09/01/06 05:42 PM
Re: What would you like to see come out of PRT?

Originally posted by KingpinSVT:
I was just digging through some old threads, you should do a harness bar! Something like dion had.

I would rather see that than endlinks, since I can name 2 people who already make nice sets of those




Who's already making spherical rod front endlinks?


KingpinSVT
(Addicted CEG\'er)
09/01/06 07:57 PM
Re: What would you like to see come out of PRT?

Stazi and Bradness

Edit: I dont know if Stazi's are spherical, but I believe they are at least beefier than stock.


Kremithefrog
(I have no life)
09/01/06 08:14 PM
Re: What would you like to see come out of PRT?

Stazi makes spherical rear. I didn't know anyone makes front end links. But the new ones from ford are better than what came stock on the cars.

KingpinSVT
(Addicted CEG\'er)
09/01/06 08:28 PM
Re: What would you like to see come out of PRT?

Oops! I didnt notice he said front too! AFAIK, no one makes the fronts.

Both Bradness and Stazi make rear endlinks, just to set the record straight.


striker2
(Veteran CEG\'er)
09/05/06 02:31 AM
Re: What would you like to see come out of PRT?

how about some adjustable frt and rear sway bars and endlinks


Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.005 seconds in which 0.003 seconds were spent on a total of 4 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company