Swazo
(Hard-core CEG'er)
04/04/05 01:50 AM
Re: Extrude Hone GB- Directly through EH

If there was no gain to this, then I wouldn't be spending $285 for it. Gains will depend on your mods. For example, a turbo 3L w/ PnP'd heads will get more gains than a basicly stock SVT from this mod.

Originally posted by Dan Nixon:
Awhile back I got some approx CFU rates from Extrude Hone..
stock = 155 CFU
single= 170 CFU
double= 180 CFU
triple= 188-190 CFU

We also know the SVT heads were flowed at 210-215 CFU (stock is about 195)..and t.body is reportedly over 300 CFU. So the point is that even on a 2.5L the UIM may be flow limiting factor along with LIM butterflies..





Contact Us Contour.org

*
UBB.threads™ 6.2.3

Generated in 0.003 seconds in which 0.001 seconds were spent on a total of 4 queries. Zlib compression enabled.

Copyright 1999-2005 Lance Kinley

CEG and contour.org are not affiliated with nor endorsed by Ford Motor Company