Static
CEG'er
so I had access to a service manual and now cant seem to get the CD back so can somebody give me the torque specs on the timing cover and valve cover bolts and oil pan as well. thanks alot
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
torque specs
- Thread starter Static
- Start date
posthuman63t
Veteran CEG'er
Front Cover - 25 Nm
Valve Cover - 10 Nm
Oil Pan - 25 Nm
Note: There is a specific order in which to tighten all of these. I suggest you find yourself another CD. Maybe if I get bored tomorrow I can post the pictures up.
Valve Cover - 10 Nm
Oil Pan - 25 Nm
Note: There is a specific order in which to tighten all of these. I suggest you find yourself another CD. Maybe if I get bored tomorrow I can post the pictures up.
Static
CEG'er
if its like a head then its from the center out, But if you could post pics that would be great.
Static
CEG'er
ok I forgot that I also need the specs for the cam bolts and the head bolts... do you have this stuff in ftlbs also
warmonger
Hard-core CEG'er
I think the cam caps are 10 N-m, IIRC that is 80-85 in-lbs, or about 7 ft-lbs.
You'd be better off checking the CD rom though.
The head bolts are a 3 step process and you'd better get a picture of that too.
You'd be better off checking the CD rom though.
The head bolts are a 3 step process and you'd better get a picture of that too.
Blackcoog
Hard-core CEG'er
Pick up a $20 chiltons manual. It goes over all the specs and gives you the sequences. You should be able to get it at any autoparts store.