• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Pictures of my 2000 svt

RyeBread

New CEG'er
Joined
May 31, 2023
Messages
8
Location
Washington
I’ve had it for about 2 months now71729656770__D8D2C7A7-F6FF-4802-85F8-1FCEDB71FF46.jpeg
 

Attachments

  • 71503103255__BAB7E89B-8D62-413A-994D-54DC5B69A94B.jpeg
    71503103255__BAB7E89B-8D62-413A-994D-54DC5B69A94B.jpeg
    183.1 KB · Views: 11
  • IMG_7525.jpeg
    IMG_7525.jpeg
    146.8 KB · Views: 11
  • IMG_1660.jpeg
    IMG_1660.jpeg
    83.7 KB · Views: 11
Love what you did to yours!

Still trying to get this girl back to where she was as most of the things on her need to be done (REALLY need a dash repair).



1701385305855.png1701385388188.png

Dirty Girl needs a bath, but
 
Love what you did to yours!

Still trying to get this girl back to where she was as most of the things on her need to be done (REALLY need a dash repair).



View attachment 13325ssssssssView attachment 13326nn

Dirty Girl needs a bath, but
What's wrong with your dash? Mine looks good, but the facia around the headlight and wind****eldwasher seems to be very loose and squeaky. Would tightening it be a very difficult job? Any suggestions...?
 
What's wrong with your dash? Mine looks good, but the facia around the headlight and wind****eldwasher seems to be very loose and squeaky. Would tightening it be a very difficult job? Any suggestions...?
Yes, it IS loose and squeaky! It has come loose at both sides; though it's very tight in the middle. I was going to ask if anyone else has had this problem.
 
What's wrong with your dash? Mine looks good, but the facia around the headlight and wind****eldwasher seems to be very loose and squeaky. Would tightening it be a very difficult job? Any suggestions...?
So there was A manufacturer's defect where the dashboard would warp upwards and there was a early 2000s recall for this. Sometimes this wouldn't even fix the problem but I'm going to have it fixed when the car goes in next week to have everything done to it. In terms of tightening up the fascia I'm not sure of how that would work. Something quirky that I was able to figure out with the car was that The hood wasn't exactly matching up with the other areas of the left and right fender but there are small adjusters that you can play with while the hood is up to make it well aligned.
 
Back
Top