fuel injector converters, anybody use them?
So I got my 19lb injectors the other day, but until I can tune those are out of the question. I picked up 3 used 17lb injectors, just to find out that they also have the EV6 USCAR connectors as well. My car uses the beige "pencil" injectors with the EV1 connectors, not the fat injectors. I have found on ebay some adapters to connect EV1 harnesses to EV6 injectors, there are 2 types, one is a single piece plug on both ends adapter, and one is two plugs wired together. Anybody with experience in the fuel injector area of the car who can tell me if I can get away with the straight adapter in terms of clearance, or do I need the wired ones? It looks like a tight fit between the injector and connector/rail/manifold area, but that is just by peeking in where I can. Any help is appreciated...
***Chasing the Contour dragon...***
1998 ford contour SE 2.5L Duratec ATX spruce green
engines: 2nd (2.5L at 195,000) CD4E: 3rd. 196,000 miles, last 40,000 severe service