• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

FAQ: 3L Part Numbers

GTO Pete

CEG'er
Joined
Apr 7, 2001
Messages
161
Location
Maryland
Here are some of the part numbers for aftermarket and/or Ford OEM 3L parts.

If anyone has any corrections or things to add to this post, please do so.

Please keep other comments and/or questions in other threads please so that this post is just as informational as it can be.

If you have part numbers, please post them here - 3L build related parts only.

Note: Prices listed are what have been paid in the past and may not be current with today's pricing at your local parts store.


Engine:
Per Bill Jenkins:
3.0L short block, NEW. Build date is from 04/01/03 and is the same part# for Sable, Taurus, Escape.

4F1Z-6009-BA List $702.55 Inet $526.91 Core $500.00


Seals and gaskets:
- Fel-Pro Part# 61006 SE TB gasket, $1.59
- Fel-Pro Part# 61006 SVT TB Gasket
- Fel-Pro Part# 70149 EGR gasket
- Fel-Pro Part# 9038PT 2.5L Left Hand Head Gasket
- Fel-Pro Part# 9039PT 2.5L Right Hand Head Gasket
- Fel-Pro Part# 9540PT 3L Left Hand Head Gasket
- Fel-Pro Part# 9541PT 3L Right Hand Head Gasket
- Fel-Pro Part# CS9038 2.5L lower conversion Kit (includes oil pan gasket, oil seals etc.), $72
- Fel-Pro Part# ES72159 Head bolt set, 2.5L 2 req., $16.92ea
- Fel-Pro Part# HS9038PT Head gasket set, conversional $231.15
- Fel-Pro Part# MS92586 3L Plastic Oval Port Intake Manifold Set
- Fel-Pro Part# MS95715 Exhaust Manifold Gasket (53mm x 32mm)
- Fel-Pro Part# MS95726 Intake manifold gasket set, $30.15
- Fel-Pro Part# OS30675R Oil pan set , $35.27
- Fel-Pro Part# SS72873-1 Valve Stem Seals (Viton)
- Fel-Pro Part# TCS45966 Camshaft rear seal gasket set, $6.95
- Fel-Pro Part# TCS45967 Crankshaft front seal, $14.55
(Includes 2.5L head gaskets that are not needed.)
- Fel-Pro Part# VS50462 Valve cover set, $32.59

- BCA part# 3909 Crankshaft oil seal, $13.32
- BCA part# 5277 Crankshaft oil seal (teflon), $16.76
- BCA part# 99363 Crankshaft oil seal (redi-sleeve), $33.50
- BCA part# 88187 Harmonic balancer sleeve, $4.18
- BCA part# 482041N Oil seal, front timing cover, $7.67
- BCA part# 99187 Oil seal, front timing cover (redi-sleeve), $22.58
- Spectra Premium #1719 non-SVT radiator, $138.41


Clevite 77 bearings:
- CB-1772P Rod bearing, available in standard, -.25MM, -.50MM, and -.75MM.
- MS-2207 Mains (not yet available)


Federal Mogul:
- 7262M- Standard Grade Main bearings (also available in non standard grade)
- 6-4395A- standard grade rod bearings (also available in non standard grade)


Ford part numbers:
- 2S7Z-6513-AA ST220 Valve Springs (measured 161-163 lb/in)
- 3F1Z-6564-AA New Roller Finger Followers
- 3M4Z-6675-BA Upgraded Oil Pan Set
(2 drain back channels and better lower baffles – comes with gasket and hardware)
- 4F1Z-6065-AA Head Bolts
- F3LY-6214-A Connecting Rod Bolts, need 12
- F5AZ-6700-A 3.0 Front Crankshaft Seal
- F5AZ-6701-A 3.0 Rear Crankshaft Seal
- F5DZ-9E936-AE SVT TB Gasket
- F5RZ-2A411-A 2.5L UIM Plastic Retainer Grommet with Brass Insert Sleeve
- F5RZ-2L181-AA 2.5L UIM Plastic Retainer Grommet
- F5RZ-6020-A 2.5 Right Front Timing Cover Gasket
- F5RZ-6020-B 2.5 Center Front Timing Cover Gasket
- F5RZ-6020-C 2.5 Left Front Timing Cover Gasket
- F5RZ-6345-C Lower cylinder block retaining bolts, need 4
- F5RZ-6345-D need 8
- F5RZ-6345-E need 5
- F5RZ-6584-B 2.5 Right Valve Cover Gasket
- F5RZ-6584-C 2.5 Left Valve Cover Gasket
- F5RZ-9439-B 2.5 Lower Intake Manifold Gasket
- F5RZ-9H486-BA 2.5 Upper Intake Manifold Gasket
- F5RZ-17285-AA MTX-75 Speedo Gear
- F6DZ-6345-CA need 5
- F6DZ6505A Valve-exhaust
- F6DZ6507A Valve-intake
- F6RZ-9K313-BC Fuel vapor hose
- F7RZ-4211-AC Differential Bearings (2 req)
- W701-512-S301 TTY Crank Pulley Bolt
- XF1Z-6051-BA 3.0 Right Head Gasket
- XF1Z-6051-DA 3.0 Left Head Gasket
- XS4Z-7201-CD Upgraded Shifter Tower (03+)
- XS8Z-7230-DD 1-2 Shifter Fork, Roller Bearings (02+)
- XW4Z-9448-AA Duratec Exhaust Manifold Gasket (50mm x 26mm)
- YF1Z-6148-BA Piston rings, $30.03 (does 2 pistons)
- YF1Z-6513-FA Duratec Valve Springs (rated 153 lb/in per manual)
- YL8Z-6622-BA 01+ Upgraded Oil Pickup (req 01+ main studs)
- YL8Z-6687-AA 01+ Upgraded Windage Tray (req 01+ main studs)
- YS2Z-7230-BA 5-R Shifter Fork, Revised (00)
- YS4Z-7230-AD 3-4 Shifter Fork, Modified Oil Scraper (01+)
- YS4Z-7K453-FA Shifter Retaining Clip

Motor mount/Powersteering bracket parts
(needed for mid '98 and previous years to fit to the 3L block):
1S7Z3A732AA Bracket, $32.72
W704693S309 Long Bolts, $5.22 each
W704694S309 Short Bolts, $3.53 each


ARP bolts:
- 253-4701 ARP Head Studs
- 253-5402 ARP Main stud kit


K&N Filters:
K&N Filters
Tapered Conical - DB x DT x L
RF-1045 (5.5 x 4 x 8) = 720cfm
RC-4630 (5.5 x 4.5 x 6.5) = 615cfm
RE-0950 (6 x 4.625 x 6) = 605cfm
RE-0920 (6 x 4.625 x 9) = 900cfm
RU-3530 (5.375 x 4.375 x 7) = 645cfm (3.75" flange)
Straight Conical - D x L
RU-1785 (5 x 8.5) = 800cfm


Miscellaneous parts:
- Stant Part# 13396 160 Degree T-Stat
- Bosch# 13246 L1H1 Wideband O2 Sensor


Tools:
Rotunda Tool Set - Essential
T94P-6136-AH Connecting Rod Guides
T94P-6256-AH Camshaft Seal Protector
T94P-6256-BH Camshaft Seal Replacer
T94P-6256-DH Camshaft Damper Replacer
T94P-6312-AH Water Pump Pulley Remover/Replacer
T94P-6312-BH Water Inlet Tube Replacer
T94P-6510-BH Valve Guide Replacer Adapter
T94P-6510-CH Valve Stem Seal Replacer
T94P-6256-CH Camshaft Alignment Triming Tool
T94P-6510-AH Valve Stem Seal Remover
T94P-6510-DH Valve Guide Replacer Adapter
T94P-6565-AH Valve Spring Compressor Adapter
T94P-4451-AH Measuring Fixture
T94P-4451-BH Differential Shim Selection Tool Adapter
T94P-7025-BH Multi-Bearing Cup Replacer
T94P-7025-CH Differential Drive Shaft Seal Replacer
T94P-7025-DH Selector Shaft Bearing Remover/Replacer
T94P-7025-EH Pinion Spline Socket
T94P-7025-FH Gear Lever Aligning Tool
T94P-7025-GH Differential Bearing Cone Replacer
T94P-7025-HH Selector Shaft Seal Remover/Replacer
T94P-2100-AH Sub Frame Alignment Pin Set
T94P-6000-AH Power Train Alignment Gauge Set
T94P-70010-AH Transmission Range Sensor Tool
 
I don't know if these can be used or not, but i found a part number for Clevite main bearings for Duratec 3.0. The part number is MS-2207P. Whats the advantage of these? I'm about to do a engine swap and trying to get the best parts for everything
 
Complete 3.0 l engine?

Complete 3.0 l engine?

Does anyone know of a company that sells the 3.0l engine as a crate motor?
 
all I see here is this:

- F5RZ-6020-A 2.5 Right Front Timing Cover Gasket
- F5RZ-6020-B 2.5 Center Front Timing Cover Gasket
- F5RZ-6020-C 2.5 Left Front Timing Cover Gasket

is that to say the only source for timing cover gaskets is a ford dealer?

thanks dudes
 
The correct part number for replacement plugs on the ST220/Mondeo intake are as follows:

Engineering P/N: W528011S1309
Ford P/N: F5RZ-6026E

Thanks to CSVT#49
 
The correct part number for replacement plugs on the ST220/Mondeo intake are as follows:

Engineering P/N: W528011S1309
Ford P/N: F5RZ-6026E

Thanks to CSVT#49

Ah yes you beat me to it. Thanks for putting the info in here... for some reason I was thinking it was locked.

Also to add to this in the US the part is used as the frost plug on all 2.0L Duratec cylinder heads.
 
- 2S7Z-6513-AA ST220 Valve Springs (measured 161-163 lb/in)

These springs are no longer available under this part number. I received the following message below when trying to order them from Tousley Ford's Trademotion part's website.

Supersession Information Part number 2S7Z6513AA was superseded by part number 2S7Z6513AC.

This part number is now shared for the following vehicles...

Escape, Mariner - 3.0l 2001 - 2007
Freestyle - 3.0l 2005 - 2007
Escape, Mariner - 3.0l 2008
Contour, Mystique - 2.5l 1995 - 2000
Fusion, Milan - 3.0l 2006 - 2009
Zephyr - 3.0l 2006
Sable, Taurus - 3.0l dohc 1996 - 2005
Five Hundred, Montego - 3.0l 2005 - 2007
 
Figured I'd throw this in here since I never posted this information up...

But as one would have expected the Fluidampr Mazda6 damper, p/n 571001 will work on all of our engines per the email I received from Fluidampr themselves...

Ivan @ Fluidampr said:
Hi Mike,

Thank you for your interest in Fluidampr products and services. I apologize for the delay, I have been out of the office since last week and the form mails were still being directed to my email.

You are correct; our Mazda damper part # 571001 should work for your application. It will fit the following applications:


FITS FOLLOWING MODELS WITH 2.5L/3.0L DOHC DURATEC V6 ONLY

FORD CONTOUR (1999 - 2000)
FORD CONTOUR GL (1995 - 1998)
FORD CONTOUR LX (1995 - 1998)
FORD CONTOUR SE (1995 - 1998)
FORD CONTOUR SPORT (1996 - 1997)
FORD CONTOUR SVT (1998 - 2000)
FORD ESCAPE (2001 - 2005)
FORD ESCAPE LIMITED (2006 - 2007)
FORD ESCAPE XLT (2006 - 2007)
FORD FUSION (2003-2009)
LINCOLN ZEPHYR 2006
MAZDA 6 (2003 - 2008)
MAZDA MPV (2000 - 2001)
MAZDA MPV (2003 - 2006)
MAZDA TRIBUTE 2001
MAZDA TRIBUTE DX 2002
MAZDA TRIBUTE ES (2002 - 2004)
MAZDA TRIBUTE LX (2002 - 2004)
MAZDA TRIBUTE S 2005 - 2008)
MERCURY COUGAR (1999 - 2002)
MERCURY COUGAR S 2001
MERCURY MARINER 2008
MERCURY MARINER LUXURY (2006 - 2007)
MERCURY MARINER PREMIER (2005 - 2008)
MERCURY MILAN (2006-2009)
MERCURY MYSTIQUE (1999 - 2000)
MERCURY MYSTIQUE GS (1995 - 1997)
MERCURY MYSTIQUE LS (1996 - 1998)
MERCURY MYSTIQUE YOUNG AMERICA 1995


Note: WILL NOT fit the Ford Taurus Duratec V-6, as the Taurus has a different belt pulley configuration.

If you have any other questions you may contact me via email or direct at 716-995-6232.


Best Regards,

Ivan Snyder III
Sales/Customer Service
Vibratech TVD/Fluidampr
Ph: 716-592-1000 X: 6232
Fax: 716-592-1001
Email: ivan.snyder@vibratechtvd.com
Email: ivan.snyder@fluidampr.com
 
has anyone found the springs cheaper than 5.35 a piece?

Yea, Tousley Ford has them on their website for $4.68... so if your replacing them all $112.32 + shipping. Although you could also buy the aftermarket brand Sealed Power valve springs (p/n: VS1646) for $1.76 a piece at RockAuto
 
Just for reference....

Those people that are upgrading to the full 3L UIM and LIM (I'm referencing my experience with the 2005 3L) can pick up any SAE quick disconnect fitting that is 3/8" to any size AN fitting. I personally chose to use Aeromotive, which their part number is 15118. It goes from the SAE 3/8" quick connect to a AN-08 port. See pics below for reference.

railquickconnect.jpg

railquickconnect2.jpg

railquickconnect3.jpg
 
Does anybody know the part number for the nuts located on the oil baffle? There is 5 studs with nuts on them, one of which is used on the oil pump pickup tube. I was looking on AllData and it looks like that are TTY - I'm having a hell of a time trying to find these things.
 
This asshole is hard to find:
PCV box/Block off plate for crank case between the heads. 3F1Z6B752AA
 
Back
Top