Heatercore Update
Heatercore Update
I installed my heatercore a few days ago. I must admit putting it back together was easier then taking it out. I still don't have the inside of the Tour back together. I decided to use the replacement core as you know the inlet outlet pipes was 3/4 and the core from ford pipes were 5/8 so what I did to solve that problem I purchased two transition plastic pieces that went from 5/8 to 3/4. I cut the 5/8 hose and put the plastic piece in that fit then I put 3/4 hose on the other end and fitted the 3/4 hose to the core clamped and tightened the hoses. While I was working in that area I also put a flush T in. I haven't put any coolant in the system yet I'm still working on my car. I plan to do the timing and change the waterpump this weekend. I am currently changing the air compressor coil and clutch, the bearings was shot. Don't really need the tour right now I'm on vacation. One thing I am learning you need to work on these car when your not in a hurry. So when you get pissed you have time to walk away and come back to it.