CTA Motorsports Zetec Intake Kit (We may start making them again, but...)

[Chris@CTA]

We need to gauge interest first.

It's been a while since I have posted here, been busy with our other Project Cars over the past couple of years.

Here is what we are considering to make. This intake kit will be based on our previous kits, made up to a couple of years ago, but will come with the filter relocator kit included. We would expect the price to be $199.00USD/$219.00CAD, cheaper on a GB of course.

Here is a pic of our previous generation kit.


Here is what we have been discussing, as per the contents of the kit.
3" intake piping
High pressure black silicone couplings
High pressure 90 degree black silicone elbow (replacing the previous metal TB elbow)
Reducer adapter to fit over stock TB
Gear clamps
Crankcase breather filter
Black vacuum hose
MAF adapter support and hardware
Air filter
CTA Motorsports stickers

Sorry, no pics yet, because it's only in the idea stage.

I don't know how to do a poll here, or if it is possible to do one here, but please post in this thread, if you think we should go ahead and make these intake kits again.

[KerryKool]

Interested! on two conditions:

1) Colored couplings(if possible)
2) Price, I'll what and see what happens here about a GB

Also, how about us 95-97(?) guys that have IAT separate from the MAF sensor? Will there be an option of having a bung for it?

Get pics of it up whenever you get a chance.

Edit: Sweetness! (about the bung in post below)

[Chris@CTA]

Interested on two conditions:

1) Colored couplings(if possible)
2) Price, I'll what and see what happens here about a GB

Also, how about us 95-97(?) guys that have IAT separate from the MAF sensor? Will there be an option of having a bung for it?

Get pics of it up whenever you get a chance.

We had previously built two versions, a pre 98 and 98 and newer, so that would not be a problem to repeat.

[pre98zetec]

Also, how about us 95-97(?) guys that have IAT separate from the MAF sensor? Will there be an option of having a bung for it?

post 98's still have the bung on the intake tube, what are you talking about??

[Chris@CTA]

We also had versions for 6 wire MAF's, mid 99 to 2000.

[hectik1]

Good to see these are going to be made again. Quality part!

[d c]

I had one of your intake kits on my mondeo here in the UK and was very pleased with it. It sounded awesome at WOT. The reason its not still on the car is that I'm now supercharged.
The sevice and shipping was second to none and Chris was very helpful with any questions I had answering emails quickly.
All in all a quality product from an efficient company

[BrApple]

I'm interested but the price quoted is to high to justify on my daily driver ... if the gb price is really good then I would concider it

[hectik1]

I had one of your intake kits on my mondeo here in the UK and was very pleased with it. It sounded awesome at WOT. The reason its not still on the car is that I'm now supercharged.
The sevice and shipping was second to none and Chris was very helpful with any questions I had answering emails quickly.
All in all a quality product from an efficient company

You could use it with the supercharger.....I did.

[blakjak]

i'm in if we can get the price down a little