Forum: Exterior and Interior How-To

The following has been written to show the steps required to replace the window and run channel damaged from a break in. It should be noted that...

There was a request that I bring this over from the old board. http://i41.photobucket.com/albums/e290/69boss302/Other/th_MOV00329.jpg

Wiper Arm removal, Cowl Screen removal and Fresh Air (Cabin) filter replacement. This is valid for all year Contour and Mystiques. The hood...

What you will need... Bondo applicator cordless drill astro smart eraser pad... http://www.goodspeedmotoring.com/astro-eraser-wheel-400e.html ...

Here is a write up on how to make the fog lights work with the parking lights. Things you will need. Wire strippers Razor blade Soldering...

Photo tutorial on making your own gauges Special thanks to savior, he gave me the idea and did a lot of the original work with files If Anyone...

My car finally started having difficulty opening both front doors much like several folks have experienced already. Read through the posts and dug...

Auto down for front passenger side door (revised 8/07) 11/11/06 For 95- 00 Tours, & Stiques..... I just...

A lot of us seem to have non-functional trunk opening mechanisms by remote. mine hasnt worked for years. so i finally decided to battle it. this...

It has been awhile since I've been here but I figured I post this up for people to see. I had to replace the driver's side axle on my '95 Contour...

How to Build Fiberglass eyebrows/lids: Time: I worked on mine a few hrs over many weekends But I think if you work diligently you could finish...

*** First and foremost; I did not create this mod or the original HowTo. I am simply adding photos to it and a bit more detail to make this...

This is my first how-to on something that interested me. I hope this helps someone else here. Pretty basic, but I am proud of it :D. Final goal...

Don't listen to what anyone else tells you, this is the easiest way to do this. Repeat the process for the other side and do the reverse process to...

This is a good guide for wheel studs when you add a 3mm-10mm spacer to your Contour/Mystique. Stock: KNURL DIAMETER: 13.08mm LENGTH: 42mm...

As taken from the main site with some modifications. The below instructions are for early 98 cars. To program a new key: · Buy a...

(again taken from them main site) For the Keyless Entry Transmitter: Up to 4 transmitters can be programmed. Gather up ALL of the units...

Please add this post after the first part. Remove the knuckle by tapping it off with a hammer (does not have to be real hard)...

Here is what I did to replace the wheel bearings: Remove the Wheel Remove the axle nut (I got some hired help for this part) Use a 1-1/4...

Hey guys, I know there's one on the old forums, but it's hard to find, and has a few holes in it. So, here we go. (Pics soon) NOTE For 1995-96...