Forum: Exterior and Interior How-To

went to change dome light bulb and the sunroof motor cover broke where it screws on the roof. I decided to make sure that cant happen again. ...

TURN SIGNAL SWITCH REPAIR AND REPLACE This is a super easy repair! Symptoms: On my car the symptom was an intermittent failure of the turn...

Here is a write up on how to make the fog lights work with the parking lights. Things you will need. Wire strippers Razor blade Soldering...

Photo tutorial on making your own gauges Special thanks to savior, he gave me the idea and did a lot of the original work with files If Anyone...

My car finally started having difficulty opening both front doors much like several folks have experienced already. Read through the posts and dug...

This is a good guide for wheel studs when you add a 3mm-10mm spacer to your Contour/Mystique. Stock: KNURL DIAMETER: 13.08mm LENGTH: 42mm...

Don't listen to what anyone else tells you, this is the easiest way to do this. Repeat the process for the other side and do the reverse process to...

Very easy, but time consuming to really do it right. Well worth the effort, though, and a very enjoyable result. Your headlights may look like...

i have recently figured out a way to fix your broken sunroof cover with as litte, time and effort, as possible! Mikey P came by my house today and...

The purpose of this writeup is to provide a pictorial guide for replacing the blower motor resistor pack. It is applicable to all years, both Ford &...

How To: Generalized procedure to reconnect the broken tabs on the emergency brake boot. Parts & Tools Required: Center column, Emergency brake...

My 95 Contour GL has power locks and windows, but, no keyless entry. I purchsed a keyless entry system off ebay for under 20 bucks new and shipped. ...

This is my first how-to on something that interested me. I hope this helps someone else here. Pretty basic, but I am proud of it :D. Final goal...

Step 1: Removing the weather shield. Remove weather shield from bottom of car by removing the 9 torx screws and washers, and then pulling off. 5 are...

There are a couple of How-To's and threads about this subject, but none with photo's and none as simple as the method I discovered today. This method...

First, let me start by giving credit where credit is due. I got some of my information for this write-up from YOUNEEQSVT in this thread. I've...

Here is my old Steeda short shifter how to. Same idea for the B&M just skip the parts about the riser plate. edit: this is for cars with the...

This is a detailed write up on how to replace your cracked/weathered or basically old red third brake light with a new stylish smoked, clear, or red...