HOWTO documents relating to the Duratec V6
I have archived a lot of How-to files as PDFs and I am currently hosting them on an FTP server. For those of you looking for long-lost how-tos, or...
This forum is ONLY for How-to threads. If you have a question about a modification, start a new thread in the respective forum. Example: If you...
now if u have another functional actuator, replace. and then reverse steps and u should be good. IF U DONT HAVE ANOTHER, CONTINUE FURTHER The...
A lot of us seem to have non-functional trunk opening mechanisms by remote. mine hasnt worked for years. so i finally decided to battle it. this...
I have scanned the instruction Manual for the Motorcraft Fuel Pump Replacement. This is the PFS289 fuel tank "Kit" that includes everything. ...
Parts needed: Screw driver, long and short. Dremel or hack saw Pliers http://pic20.picturetrail.com/VOL1205/5584733/22548091/374683879.jpg ...
This is fairly easy to do and is alot cheaper than letting the dealership do it. What you need: Catch pan for the Anti-freeze 8mm...
INTRODUCTION Whether you are fixing a problem, improving performance or simply doing regular maintenance, there is nothing like the pride one...
I recently bought my 2000 SVT and its in excellent shape, except for a hemorrhaging driver's side headlamp and passenger side headlamp with broken...
Optimizing A 65mm Throttle Body Items: 1.Hack saw 2.Screw driver 3.Dremel—Cutting disks 4.Thread locker (blue or red) 5. Steel Bar ˝ x 1/8th...
Ok all but one of the how tos are down and that one is missing some info and has no pics either. I was also led to believe that this would be a very...
Removal of bank 1 timing equipment: -remove the two 10mm bolts on the bank 1 tensioner to remove the entire tensioner -remove the chain guide that...
This is extremly easy to do and very cheap *****THIS IS NOT TO TAKE AWAY FROM WHAT POLE120 DOES AS I AM SURE HIS ARE ALOT CLEANER LOOKING AND...
-I found this hood release kit at my local Parts store for about $20.00. (HELP pt# 03323. This cable has the same diameter as the IMRC cable....
I have an A/C install help guide with pictures that I made, which is posted on my website, I also put a new starter in this weekend with my dad, but...
98 svt v-6? The oil pre-heater (coolant) adapter between the block and the oil filter has been bypassed on my car. one of the nipples rusted off...
====Oil Change How-To==== By CEGer Derk2000 =Tools/Material Required= 6 quarts of oil Oil filter Socket wrench 15mm socket Oil filter...
IMRC cable repair Here's how I repaired my cable. -Remove IMRC from engine http://i6.photobucket.com/albums/y212/Dukeofsho/SVT/PICT4897.jpg...
my mil eliminator are broke by the dog i kill now i need to make 2 dosnt matter if are home made it or need to buy parts in radio shack , anybody...
I just recently a SVT tb on my SE and I ended up getting a code P1120, tps sensor voltage to low, it turns out that I had a SE tps and not a SVT one....
How-to: This Example Is Of The Focus SVT Fuel Pump Install On A Contour: by Pale Horse The quickest way to do this is to first remove the lower...
- remove the MAF from the car - spray some electrical contact cleaner or non-chlorinated brake cleaner (something that leaves NO residue) through...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules