escort ordu kıbrıs escort escort izmit escort bodrum escort rize escort konya escort kırklareli escort van halkalı escort escort erzurum escort sivas escort samsun escort tokat altinrehbereskisehir.com konyachad.com sakaryaehliyet.com tiktaktrabzon.com escortlarkibris.net canakkalesondaj.com kayseriyelek.com buderuskonya.com traction control button pin out. - Contour Enthusiasts Group

Announcement

Collapse
No announcement yet.

traction control button pin out.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • traction control button pin out.

    Does anyone have access to a pin out or schematic / diagram for the traction control button on the dash for a 98+? I'm looking at using the switch to control something but need to know what wires will do what and when.

    Thanks.
    Chris
    1998 Ford SVT Contour #3571 ....... fixing and repairing daily.

  • #2
    Bumpy, anyone?
    Chris
    1998 Ford SVT Contour #3571 ....... fixing and repairing daily.

    Comment


    • #3
      Acording to my haynes manual bk/wh goes to ground. And the other bk/wh goes to the abs module (I know very specific) and the wh/gn goes to adaptive dampening, lastly bk/bu goes to cruise control. When the switch is put in the disable position it is simply grounding the bk/wh wire that comes out of the abs module. When in enable possition it is connectiong the abs module and the cruise module.
      98.5 t-red Zetec mtx
      207,000 and counting
      i love bring my car into class, it give a new "special circumstance" every day.

      Comment


      • #4
        I consulted my Haynes manual as well, but the problem is, the wire colors and pinning doesn't match
        Chris
        1998 Ford SVT Contour #3571 ....... fixing and repairing daily.

        Comment


        • #5
          Is it atleast a 3 wire button in the car? And if so are two of the wires the same?
          98.5 t-red Zetec mtx
          207,000 and counting
          i love bring my car into class, it give a new "special circumstance" every day.

          Comment


          • #6
            Brain fart at the moment and can't remember which one of these two are the defroster or traction control but I'll post them both with wire colors and pinout.

            First plug, grey plug,
            Pin1 black wire/white tracer
            Pin2 black single wire, and black jumper with pin 7
            Pin3 empty
            Pin4 black/green tracer
            Pin5 empty
            Pin6 green/black tracer
            Pin7 jumped with pin 2
            Pin8 blue/orange tracer


            Plug 2, blue plug
            Pin1 black/white tracer
            Pin2 black wire, and black jumper to pin 4
            Pin3 empty
            Pin4 black jumper to pun 2
            Pin5 empty
            Pin6 green/brown tracer
            Pin7 empty
            Pin8 blue


            Now according to this schematic from through Haynes manual we are referring too, it lists the plug as c717. Pins being utilized are 7,2,3. 7 being bk /wh and going to abs module, 2 being bk /wh and going to ground, and 3 being bk/bu to cruise control, and wh /gn going to adaptive damping module.
            Chris
            1998 Ford SVT Contour #3571 ....... fixing and repairing daily.

            Comment


            • #7
              They can't make anything simple can they. Lol. I think it MAY be the second one. The diagram says it should be a 3 or a 4 wire. But the wiring proly changed between the two gens of contours and haynes referenced the one you don't have.
              98.5 t-red Zetec mtx
              207,000 and counting
              i love bring my car into class, it give a new "special circumstance" every day.

              Comment

              Working...
              X