Announcement

Collapse
No announcement yet.

Got new motor in! Ran great!!! But then....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got new motor in! Ran great!!! But then....

    Replaced the motor, drove perfect this morning!

    Then, I went to change the rear O2 sensor 1, bank one, and the braided ground strap touched one of the ends of the mega fuse, and sparked a bit. Checked the mega fuse and it's fine. 12v at both ends

    Put everything back together and now it won't start. Cranks over easy and strong, but nothing.

    -I have fuel pressure, fuel comes out the shrader valve
    -I have power at the coil, 12v
    -I have new cam shaft and crank sensors
    -I check every relay, and fuse. All appear to be good

    I don't seem to be getting spark. I have fuel at the rails. Took the plugs out and they are dry....shouldn't they be wet?

    Did I fry the PCM? I have an extra one, but when I hook it up and try to start it, it won't even turn over.

    I was so happy to get her running today, and now this. So bummed....

    2004 Mint Chevy Z06 E85
    2004 F-250 Lariat 4x4 FX4 Off Road
    1998 CSVT 184 WHP/175 WTQ 233 WHP/215 WTQ w/Nitrous 75 shot
    2002 WRX E85 356 WHP 345 WTQ (RR self tuned) SOLD
    1988 RX-7 Turbo II (FC) Streetport 297 WHP/272 TQ SOLD.

  • #2
    Meant to put this in the troubleshooting section....
    2004 Mint Chevy Z06 E85
    2004 F-250 Lariat 4x4 FX4 Off Road
    1998 CSVT 184 WHP/175 WTQ 233 WHP/215 WTQ w/Nitrous 75 shot
    2002 WRX E85 356 WHP 345 WTQ (RR self tuned) SOLD
    1988 RX-7 Turbo II (FC) Streetport 297 WHP/272 TQ SOLD.

    Comment

    Working...
    X