solo92s10
Hard-core CEG'er
I said I would do this a little while back so here is some specs and pics of three of the oem throttle bodys that will (some with slight modification) bolt onto the svt. Hoping maybe some other members will contribute some info on aftermarket tb's as well, such as csvt49 with his 75mm bbk tb. I believe it was understood on here that the F150 tb was a 65mm tb but as you will see that is not the case.
First up is the CSVT throttle body- 60mm butterfly plate with a 63mm inlet and a 60mm out. Comes stock, Not much to say about it as it is what comes on the svtc.
96-04 4.6L Mustang Throttle body- Also found on some mid-late 90s crown vics and town and countrys with the 4.6l. Can be found for $25-$50 Used. They have a 65.36mm butterfly with a 68.5mm inlet and a 65mm outlet. This throttle body requires a bit of modification to work with the svt throttle linkage and clear the intake manifold. That info can be found in THIS HOW TO .
97-03 5.4L F150/Expedtion Throttle body - Can be found for $20-$50. They have a 70.48mm butterfly with a 68.5mm inlet and a 70MM outlet. This throttle body requires minimum modification to work with the svt and the throttle position sensor is the same as the svtc. Also this is larger than the svt intake manifold inlet so a little porting may be benificial. This is probably over kill for a 2.5L but for someone with a 3.0L and a tune it could yield some cheap hp. Though there is not much history of this throttle body being used but a few have i believe.
Pics are from left to right. SVTC, Mustang, F150
In short.
SVTC - 60MM
Mustang- 65MM
F150 - 70MM
First up is the CSVT throttle body- 60mm butterfly plate with a 63mm inlet and a 60mm out. Comes stock, Not much to say about it as it is what comes on the svtc.
96-04 4.6L Mustang Throttle body- Also found on some mid-late 90s crown vics and town and countrys with the 4.6l. Can be found for $25-$50 Used. They have a 65.36mm butterfly with a 68.5mm inlet and a 65mm outlet. This throttle body requires a bit of modification to work with the svt throttle linkage and clear the intake manifold. That info can be found in THIS HOW TO .
97-03 5.4L F150/Expedtion Throttle body - Can be found for $20-$50. They have a 70.48mm butterfly with a 68.5mm inlet and a 70MM outlet. This throttle body requires minimum modification to work with the svt and the throttle position sensor is the same as the svtc. Also this is larger than the svt intake manifold inlet so a little porting may be benificial. This is probably over kill for a 2.5L but for someone with a 3.0L and a tune it could yield some cheap hp. Though there is not much history of this throttle body being used but a few have i believe.
Pics are from left to right. SVTC, Mustang, F150
In short.
SVTC - 60MM
Mustang- 65MM
F150 - 70MM