I am wondering if anyone has a duratec out of their car right now that they could do some measurements on. I need the measurement from left to right (trans mating surface to farthest flywheel on the passenger side) front to back (cover to cover) and if anyone has a diagram of the trans bolt pattern. If no one has a diagram, if you could measure the bolt pattern in such a way that I could reproduce it. The flywheel diameter and it's center distance straight down from the centerline of top bolts of the engine to tx mount would be of great help. Also, if anyone has the input shaft spline count and diameter would be great also. I am trying to gauge the plausibility of swapping in a 2.5 into my '82 Escort. And don't worry, I know I'm nuts. But when you have access to a well stocked machine shop, the impossible can become merely difficult