• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Need a visual for fuel line mod

montrese04

Veteran CEG'er
Joined
Aug 11, 2008
Messages
835
Location
Indianapolis, in
Ok so npg isn't in biz and I've searched the old forums for how to do the fuel rail mod the old way but am failing at visualizing in my head smh. The link I found was in the old ubb thread and T. Haines wrote it up
 
like mike did, an aftermarket fuel pressure regulator with a return port built into it would be the nicest looking. the NPG fuel rail mod was just a block of aluminum that was drilled out for a feed, return, and a feed on the other side, and a hole matching up to that port for the fuel pressure regulator in the feed port. Nothin too crazy, just some carefully placed holes.
 
i actually have one of npg's fuel conversion set ups in my garage if your interested?
took it off my my car after the lower aluminum plates broke away at the o-ring groove letting the engine suck
in the seals. up to you, but would make things easier for ya.
lemme know.
texting is best 1.920.248.1217
aaron
 
Back
Top