#49's new powerplant has arrived, let the build begin

[BAD SVT]

Just hurry up man:D

[Pole120]

Haha. Not really, but even if I did no one would pay the price tag. This car with the parts on it is sitting at right around $19,380. Engine alone is at ~$13k. The goal for me was to stay below the original MSRP of $23,635.

Also I'm in the process of working with a contractor to build a rambler style house with a walk out, which would then include my ideal shop of 3 stalls wide by 2 stalls deep with a loft over the rear 3 stalls, which over looked the front 3 stalls. The back 3 will consist of (left to right) paint booth, tools area, and machining/welding area. Front 3 stalls (left to right) open work bay, work bay with two post lift, open work bay. This shop will be in addition to my main 3 stall garage for the daily drivers. The loft area of the shop will have door ways that walk into the main garage, main level of the house, and a walk out to the deck.

PLEASE start a build thread on Garage Journal if you do this.

[blu_fuz]

I agree, you are talking about building a house, moving, setting up shop. This could drag on for 5 more years.

[BAD SVT]

Haha. Not really, but even if I did no one would pay the price tag. This car with the parts on it is sitting at right around $19,380. Engine alone is at ~$13k. The goal for me was to stay below the original MSRP of $23,635.

Also I'm in the process of working with a contractor to build a rambler style house with a walk out, which would then include my ideal shop of 3 stalls wide by 2 stalls deep with a loft over the rear 3 stalls, which over looked the front 3 stalls. The back 3 will consist of (left to right) paint booth, tools area, and machining/welding area. Front 3 stalls (left to right) open work bay, work bay with two post lift, open work bay. This shop will be in addition to my main 3 stall garage for the daily drivers. The loft area of the shop will have door ways that walk into the main garage, main level of the house, and a walk out to the deck.

I see. I'll give you this much; You're certainly proficient at multi-tasking. I dunno how how you can have all this stuff on your plate at the same time and get em all done...

[CSVT#49]

I'm curious. Would you be willing to sell this to someone with time & space, and capable of finishing what u've started?

Haha. Not really, but even if I did no one would pay the price tag. This car with the parts on it is sitting at right around $19,380. Engine alone is at ~$13k. The goal for me was to stay below the original MSRP of $23,635.

Also I'm in the process of working with a contractor to build a rambler style house with a walk out, which would then include my ideal shop of 3 stalls wide by 2 stalls deep with a loft over the rear 3 stalls, which over looked the front 3 stalls. The back 3 will consist of (left to right) paint booth, tools area, and machining/welding area. Front 3 stalls (left to right) open work bay, work bay with two post lift, open work bay. This shop will be in addition to my main 3 stall garage for the daily drivers. The loft area of the shop will have door ways that walk into the main garage, main level of the house, and a walk out to the deck.

[79mustang351w]

"Come on.....do stuff!!" (Peter Griffin voice)

[BAD SVT]

Haha... no. If I was a baller I wouldn't have taken this long to get this thing finished. I just haven't sold cars. Those Chevy motors are for my Camaro, which I have owned since I was 15. I'm just old.

On another note, sorry no updates guys. I've been busy travelling for work and have not had much time for any hobby stuff. I'm still hoping to get this thing moving. It's on the task list, but just not a high priority. I've invested to much to just let it collect dust, but I need time and space to knock it out.

I'm curious. Would you be willing to sell this to someone with time & space, and capable of finishing what u've started?

[CSVT#49]

Anyone else notice he has parts from 4 different cars in there? Hahaha 2 different chevy motors, audi tt stuff, and contour stuff. That for lack of a better word.....Baller

Haha... no. If I was a baller I wouldn't have taken this long to get this thing finished. I just haven't sold cars. Those Chevy motors are for my Camaro, which I have owned since I was 15. I'm just old.

On another note, sorry no updates guys. I've been busy travelling for work and have not had much time for any hobby stuff. I'm still hoping to get this thing moving. It's on the task list, but just not a high priority. I've invested to much to just let it collect dust, but I need time and space to knock it out.

[SSTHIS03]

Anyone else notice he has parts from 4 different cars in there? Hahaha 2 different chevy motors, audi tt stuff, and contour stuff. That for lack of a better word.....Baller

[blu_fuz]

No progress since the doodle picture?

[CSVT#49]

Nope


Sent from my iPhone using Tapatalk

[elraido]

You done yet :)

[gorman]

.... who knows what the weather is gonna do next ?? I saw reports of waist deep flood water in Texas on the news !!!

Better make hay while the sun shines. Excited to see just what is possible with a Contour .....G.

[CSVT#49]

Well now that it's getting warmer out I can clear out the garage to make some room. Should have this thing up and running soon enough.

[DanMyers]

Dear Beans,

That picture made my year.


Regards,

DanMyers.