Announcement

Collapse
No announcement yet.

#49's new powerplant has arrived, let the build begin

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Updates

    Did a little work on the rear of the car to prep for the final fuel tank, pump, and lines installation.










    I'll be sand blasting the rear subframe and painting it up in chassis black and then installing this stuff...

    ADDCO rear 22mm sway bar


    PRT rear suspension components
    Last edited by CSVT#49; 10-01-2012, 11:26 PM.
    -Mike
    If you are wondering where the avatar came from look here... Link
    98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
    85 Camaro - 1969 350ci, 503BHP

    Owner - RIES PEFORMANCE

    Comment


    • hey does the addco bar fit without problems? i heard it does because it doesnt have that kink in it. im planning on running one but thats an issue for me
      1999 Mercury Cougar Full 3.0L MTX
      236HP

      Comment


      • Originally posted by aboythatskates View Post
        hey does the addco bar fit without problems? i heard it does because it doesnt have that kink in it. im planning on running one but thats an issue for me
        Pole120 has one too. I seem to remember mine having a kink in it though... I'll have to look at it again.
        -Mike
        If you are wondering where the avatar came from look here... Link
        98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
        85 Camaro - 1969 350ci, 503BHP

        Owner - RIES PEFORMANCE

        Comment


        • Thats some PRT goodness right there!!
          02 Cougar: Street driven track car. Full 3L w/ boltons, HMS trans, 6pt roll bar, weight reduction, built suspension, 13" Wilwoods, 8" w/ 245's
          #4683: under the knife
          07 GMC Sierra Classic: Duramax/Allison, loaded

          Comment


          • well the picture doesnt have it. hmmm....

            so do all those goodies from prt come with poly bushings?
            1999 Mercury Cougar Full 3.0L MTX
            236HP

            Comment


            • Originally posted by aboythatskates View Post
              well the picture doesnt have it. hmmm....

              so do all those goodies from prt come with poly bushings?
              Yes they do ;)
              -Mike
              If you are wondering where the avatar came from look here... Link
              98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
              85 Camaro - 1969 350ci, 503BHP

              Owner - RIES PEFORMANCE

              Comment


              • i will be doing a full rear end build too soon. though i might press those bushings on myself though to save some monies
                1999 Mercury Cougar Full 3.0L MTX
                236HP

                Comment


                • Originally posted by CSVT#49 View Post
                  Pole120 has one too. I seem to remember mine having a kink in it though... I'll have to look at it again.
                  I have the 24MM aussie bar.
                  99 SVT "BLKOUT2" - PRT street driven track #&$% - 13.904 at 102.58 | 98 SVT - PRT RWD conversion project car
                  00 ROUSH Cougar - SOLD | 02 SVTF - New toy and R&D car. Future RWD?

                  Owner/operator PRT www.prtautosport.com
                  Follow development of CDW-27 performance parts: http://www.facebook.com/PRTautosport

                  Comment


                  • Originally posted by Pole120 View Post
                    I have the 24MM aussie bar.
                    Huh... I guess I thought I had remembered you telling me you had the ADDCO bar. Oh well, thanks for correcting me.
                    -Mike
                    If you are wondering where the avatar came from look here... Link
                    98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                    85 Camaro - 1969 350ci, 503BHP

                    Owner - RIES PEFORMANCE

                    Comment


                    • Didnt know Josh was making those control arms available to everybody. How much were they??
                      -Brent
                      2000 Silver Frost SVT Contour 3L #1633 of 2150
                      2009 F150 FX4 Blue Flame/ Sterling Grey
                      1979 Mustang Notchback 357CI Windsor Street/Strip/Show

                      Comment


                      • Originally posted by 79mustang351w View Post
                        Didnt know Josh was making those control arms available to everybody. How much were they??
                        To be honest I don't remember lol. I bought them over a year ago I think. I suggest contacting Josh himself.
                        -Mike
                        If you are wondering where the avatar came from look here... Link
                        98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                        85 Camaro - 1969 350ci, 503BHP

                        Owner - RIES PEFORMANCE

                        Comment


                        • Originally posted by 79mustang351w View Post
                          Didnt know Josh was making those control arms available to everybody.
                          I didn't...he bought the prototype set of everything I built in '11
                          99 SVT "BLKOUT2" - PRT street driven track #&$% - 13.904 at 102.58 | 98 SVT - PRT RWD conversion project car
                          00 ROUSH Cougar - SOLD | 02 SVTF - New toy and R&D car. Future RWD?

                          Owner/operator PRT www.prtautosport.com
                          Follow development of CDW-27 performance parts: http://www.facebook.com/PRTautosport

                          Comment


                          • Well I finally solved my o-ring and gasket problem for my fuel system, PTFE (Teflon). I was able to source sheets and the correct dash size o-rings. Just so other people know...

                            AN size/AS568A size
                            -06 = -110
                            -08 = -113
                            -10 = -115

                            http://www.marcorubber.com/compatibility.htm
                            Last edited by CSVT#49; 10-11-2012, 10:20 PM.
                            -Mike
                            If you are wondering where the avatar came from look here... Link
                            98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                            85 Camaro - 1969 350ci, 503BHP

                            Owner - RIES PEFORMANCE

                            Comment


                            • the Parker O-ring Handbook is another great resource.
                              - 12 Focus SE
                              - 99 Contour SeVT <- 3L/NPG Turbo
                              - 2k Contour SVT - #2137

                              Comment


                              • Update?
                                2011 Fusion SE V6 & 07 Honda Pilot EX-L
                                98 3.0L SVT Sold 9-11-11
                                99 3.0L SVT Silver Frost #1264 Sold 1-22-10
                                95 SE MTX---Sold 9/14/07 sniff
                                98 E1 SVT #4892 of 6535T-Red Sold 8-29-08

                                Comment

                                Working...
                                X