MondeoFinland
CEG'er
Do you guys who have cammed contours, can recommend a camshaft profile to reach 270hv, with stock Svt valves, cylinder heads itselves have go through good p&p -job.
Here in Finland custom camshafts are quite cheap (120€ per shaft), so i had to regrind a st220 camshafts.
Rpm range what i wanna is 4500-7000, off course it pulls at 1500 or a 2500rpm ranges too, but maximum pull are in high rpm.
do anyone have cam -card for example. Like this:
Here in Finland custom camshafts are quite cheap (120€ per shaft), so i had to regrind a st220 camshafts.
Rpm range what i wanna is 4500-7000, off course it pulls at 1500 or a 2500rpm ranges too, but maximum pull are in high rpm.
do anyone have cam -card for example. Like this:
