rebuilt the engine from the ground up , much the same as a lot of rebuilds here , did a lot of the work myself
spec
crankshaft, front pulley, flywheel , clutch , all dynamically balanced with pistons, rods etc, by chesman in Coventry
f1 rods
cp pistons with requested cr of 10.8-1
heads ported by myself,
st200 cams fitted
block cleaned up cylinders honed , and ready for rebuild
crankshaft back from chesman
f1 rods , cp pistons assembled ready to fit
crank assembly reinstalled with new stretch bolts
pistons installed and gaskets in place
spec
crankshaft, front pulley, flywheel , clutch , all dynamically balanced with pistons, rods etc, by chesman in Coventry
f1 rods
cp pistons with requested cr of 10.8-1
heads ported by myself,
st200 cams fitted
block cleaned up cylinders honed , and ready for rebuild
crankshaft back from chesman
f1 rods , cp pistons assembled ready to fit
crank assembly reinstalled with new stretch bolts
pistons installed and gaskets in place