PDA

View Full Version : Bunch of SVT and 3L parts for sale.


svttour
10-02-2006, 01:12 AM
here is the list as follows...

2.5L and SVT list.
(all interior parts are Prarie tan)
-Steering column cover
-Stock Apillars both sides
-Headlight switch and bezel. (has a hole drilled from a previous alarm install.)
-Cup holder console
-SVT stock shift knob with assembly
-Lower B-Pillars both sides
-Leather rear bolsters both sides
-(2)hooks for hangers
-Sunroof weather stripping
-Sunvisors both sides
-Rear seatbelt connects
-Interior harness complete with main fuse panel with all fuses
-Driver side rear seatbelt with pillar cover
-Headliner and carpet
-Rear deck carpet top
-Passenger side sill that runs along bottom front to rear
(Engine)
-SVT upper intake manifold
-SVT throttle body
-Oil cooler piping
-Coolant elbow from block to Water pump
-Crosstube
-Piping from crosstube to coolant resivour
-T-stat and piping to waterpump
-(2) coil packs
-1 PAIR axle nuts
-(2sets) SVT heads(no cams) damaged from engine failures.
-Battery box part number F8RZ-10732-BA made 12/16/99
-Power steering pump pulley (stock)
-SVT stab o Shock and mounting plate
-Front and rear manifolds (Rear gutted) (EGR pipe not included)
-Heat cracked wiring harness .....FREE!!! just pay shipping.
-Oil dipstick and tube
(Body)
-Gas cap cover (Black)
-Hood latch
-98+ Driver side Headlight
-Driver side rear view mirror (Black)
-Wiper motor cover both sides
-1 Pair Front inner fender walls
-(2) SVT splash guards
(Suspension)
-1 ABS sensor
-1 Pair FRONT SVT springs and struts ONLY
(Misc)
-(2) sunroof switches
-Rear view mirror
-Amp mounting bracket
-ECU mounting bracket,clamp and engine seal bracket
-Wiper motor and wiper arms
-Cabin air filter housing
-Pair (used) 2.5L H.O. Badges
-Electric water pump(Craig and Davies)w/controller,used 1000miles included. custom fabbed crosstube that allows piping to run to and from the Waterpump.

3L parts
(Engine)
-3 wiring harnesses w/ O2 sensors (2001-2003)
-(2 sets) Front and rear manifolds(2001-2003)

-99 3L heads no cams mild port work powdercoated translucent red valve covers

Harrry
10-02-2006, 03:59 AM
Do you still have the car? I need the rear driver side turn light connector. THe connector with the pigtail. My clips broke and my light falls out of the socket i would replace but it's a whole new wiring that i would need. So i ahve been looking for a junk car i just cut it off from.

svttour
10-02-2006, 12:21 PM
No sorry, I just have whatever is posted.

m4gician
10-03-2006, 07:33 PM
I don't know if this was mentioned, but the plastic cover that houses the sunroof switch, and the dome light, that plastic fitting, do you have that available? I ask because my plastic tabs broken and I can't screw mine back together. I'll take that, I don't care what colour.

svttour
10-03-2006, 08:26 PM
I replied to your Pm.

monsoon725
10-04-2006, 12:04 PM
I replied to your Pm.


still need a pic of that shift knob!

svttour
10-04-2006, 05:53 PM
Its coming tonight I am sorry.

Rishodi
10-05-2006, 08:38 PM
Are you sure the ABS sensor is in working condition? And is it for the front or rear? Mine broke pretty easy when I replaced the wheel knuckle. :blackeye:

svttour
10-06-2006, 12:53 AM
I only have one side I dont remember which one it is and I dont know if it matters but it is in good condition. It is for the front.

fordrule
10-14-2006, 11:55 PM
do u have pics of the valve covers?..they are 3L or 2.5

svttour
10-15-2006, 02:59 AM
I do have some pics of the valve covers. They are 3L 99 valve covers. So they do not have the opening for the waterpump driven cam. They look ok except for some heat bubbling on the rear cover. It is hardly noticeable on the car. But you can obviously see it when they are off the car. If these are what you are looking for I can let them go real cheap. Send me your Email address for pics if necessary.

fordrule
10-16-2006, 08:47 AM
its cool . not interested anymore